Understanding the enhanced corrosion performance of two novel Ti-based biomedical high entropy alloys

[1]  J. Yeh,et al.  Refractory high-entropy alloys: A focused review of preparation methods and properties , 2022, Journal of Materials Science & Technology.

[2]  Mian Zhao,et al.  Heat treatment effects on microstructure and mechanical properties of TiZrNbTa high-entropy alloy , 2022, Journal of Alloys and Compounds.

[3]  H. Maier,et al.  From corrosion behavior to radiation response: A comprehensive biocompatibility assessment of a CoCrMo medium entropy alloy for utility in orthopedic and dental implants , 2022, Intermetallics.

[4]  G. Miyamoto,et al.  Nitrogen-Induced Phase Separation in Equiatomic FeNiCo Medium Entropy Alloy , 2022, Metallurgical and Materials Transactions A.

[5]  M. B. Yagci,et al.  Machine learning-assisted design of biomedical high entropy alloys with low elastic modulus for orthopedic implants , 2022, Journal of Materials Science.

[6]  H. Wang,et al.  Microstructural stability and aging behavior of refractory high entropy alloys at intermediate temperatures , 2022, Journal of Materials Science & Technology.

[7]  Zeyun Cai,et al.  Phase-tunable equiatomic and non-equiatomic Ti-Zr-Nb-Ta high-entropy alloys with ultrahigh strength for metallic biomaterials , 2022, Journal of Materials Science & Technology.

[8]  P. Liaw,et al.  Novel Ti-Zr-Hf-Nb-Fe refractory high-entropy alloys for potential biomedical applications , 2022, Journal of Alloys and Compounds.

[9]  Weidong Song,et al.  Dynamic mechanical properties and microstructure evolution of AlCoCrFeNi2.1 eutectic high-entropy alloy at different temperatures , 2022, Journal of Alloys and Compounds.

[10]  Yanjing Su,et al.  Corrosion and tribocorrosion behavior of equiatomic refractory medium entropy TiZr(Hf, Ta, Nb) alloys in chloride solutions , 2022, Corrosion Science.

[11]  Hong Wang,et al.  Tribo‐corrosion mechanisms and electromechanical behaviours for metal implants materials of CoCrMo, Ti6Al4V and Ti15Mo alloys , 2022, Biosurface and Biotribology.

[12]  M. Zubko,et al.  Influence of Molybdenum on the Microstructure, Mechanical Properties and Corrosion Resistance of Ti20Ta20Nb20(ZrHf)20−xMox (Where: x = 0, 5, 10, 15, 20) High Entropy Alloys , 2022, Materials.

[13]  Haifeng Wang,et al.  Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature , 2021, Wear.

[14]  K. Vecchio,et al.  Development of ultrahigh-entropy ceramics with tailored oxidation behavior , 2021 .

[15]  Liang Wang,et al.  Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios , 2021, Tungsten.

[16]  Muhammad Akmal,et al.  Systematic study of (MoTa) NbTiZr medium- and high-entropy alloys for biomedical implants- In vivo biocompatibility examination , 2021, Journal of Materials Science & Technology.

[17]  Tongmin Wang,et al.  Effect of Ti and Nb Contents on Microstructure and Mechanical Properties of HfZrVTaMoWTixNby Refractory High‐Entropy Alloys , 2021, Advanced Engineering Materials.

[18]  P. Leo,et al.  Passive Layers and Corrosion Resistance of Biomedical Ti-6Al-4V and β-Ti Alloys , 2021, Coatings.

[19]  A. Nazarahari,et al.  Assessment of biocompatibility of novel TiTaHf-based high entropy alloys for utility in orthopedic implants , 2021, Materials Chemistry and Physics.

[20]  L. Olmos,et al.  Tribocorrosion and corrosion behavior of quaternary Ti-24Nb-xZr-ySn alloys in SBF , 2021 .

[21]  P. Liaw,et al.  Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys , 2020 .

[22]  M. Krüger,et al.  Microstructure Evolution and Mechanical Properties of Refractory Mo-Nb-V-W-Ti High-Entropy Alloys , 2020, Metals.

[23]  Qinjia Wang,et al.  Phase Stability and Deformation Behavior of TiZrHfNbO High-Entropy Alloys , 2020, Frontiers in Materials.

[24]  M. B. Yagci,et al.  Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants , 2020 .

[25]  H. Maier,et al.  Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading , 2020 .

[26]  Jian Luo,et al.  Part II: Experimental verification of computationally predicted preferential oxidation of refractory high entropy ultra-high temperature ceramics , 2020 .

[27]  Jian Luo,et al.  Part I: Theoretical predictions of preferential oxidation in refractory high entropy materials , 2020, Acta Materialia.

[28]  P. Liaw,et al.  Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy , 2020 .

[29]  Y. Zhan,et al.  New Zr-25Ti-xMo alloys for dental implant application: Properties characterization and surface analysis. , 2020, Journal of the mechanical behavior of biomedical materials.

[30]  Baode Sun,et al.  Design of high-ductile medium entropy alloys for dental implants. , 2020, Materials science & engineering. C, Materials for biological applications.

[31]  F. Wang,et al.  Effect of Nb addition on the stability and biological corrosion resistance of Ti-Zr alloy passivation films , 2020 .

[32]  R. Jing,et al.  Mechanical properties and corrosion behavior of β-type Ti-Zr-Nb-Mo alloys for biomedical application , 2020 .

[33]  Jian Xu,et al.  (TiZrNbTa)90Mo10 high-entropy alloy: Electrochemical behavior and passive film characterization under exposure to Ringer’s solution , 2020 .

[34]  Hung-Wei Yen,et al.  Machine learning recommends affordable new Ti alloy with bone-like modulus , 2020 .

[35]  M. Brandt,et al.  Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank’s balanced salt solution , 2020 .

[36]  C. Chao,et al.  Spinodal Decomposition and Mechanical Response of a TiZrNbTa High-Entropy Alloy , 2019, Materials.

[37]  D. Canadinc,et al.  Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications , 2019, Intermetallics.

[38]  M. Linford,et al.  Zirconium oxide particles, by near-ambient pressure XPS , 2019 .

[39]  M. Surmeneva,et al.  Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices , 2019, Journal of Materials Research and Technology.

[40]  D. Vranceanu,et al.  In Vitro Activity Assays of Sputtered HAp Coatings with SiC Addition in Various Simulated Biological Fluids , 2019, Coatings.

[41]  Lai‐Chang Zhang,et al.  A Review on Biomedical Titanium Alloys: Recent Progress and Prospect , 2019, Advanced Engineering Materials.

[42]  D. Canadinc,et al.  Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti 6Al 4V substrates , 2019, Intermetallics.

[43]  N. Eliaz.  Corrosion of Metallic Biomaterials: A Review , 2019, Materials.

[44]  Haoming Wu,et al.  Effect of Al addition on structural evolution and mechanical properties of the Al HfNbTiZr high-entropy alloys , 2018, Materials Today Communications.

[45]  H. Arora,et al.  Corrosion, Erosion and Wear Behavior of Complex Concentrated Alloys: A Review , 2018, Metals.

[46]  R. Ospina,et al.  Nd:YAG (532 nm) pulsed laser deposition produces crystalline hydroxyapatite thin coatings at room temperature , 2017 .

[47]  U. K. Mudali,et al.  Corrosion behavior and surface film characterization of TaNbHfZrTi high entropy alloy in aggressive nitric acid medium , 2017 .

[48]  Mohd Hamdi,et al.  Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article , 2017 .

[49]  D. Canadinc,et al.  Investigation of the Dissolution–Reformation Cycle of the Passive Oxide Layer on NiTi Orthodontic Archwires , 2017, Shape Memory and Superelasticity.

[50]  Jian Xu,et al.  TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties. , 2017, Materials science & engineering. C, Materials for biological applications.

[51]  Aira Matsugaki,et al.  Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials , 2017 .

[52]  P. Liaw,et al.  Corrosion-resistant high-entropy alloys: A review , 2017 .

[53]  J. Watts,et al.  XPS investigation of monatomic and cluster argon ion sputtering of tantalum pentoxide , 2017 .

[54]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[55]  Jian Lu,et al.  High-entropy alloy: challenges and prospects , 2016 .

[56]  Yufeng Zheng,et al.  Recent advances in bulk metallic glasses for biomedical applications. , 2016, Acta biomaterialia.

[57]  S. Virtanen,et al.  Effect of inflammatory conditions and H 2 O 2 on bare and coated Ti-6Al-4V surfaces: Corrosion behavior, metal ion release and Ca-P formation under long-term immersion in DMEM , 2015 .

[58]  Jien-Wei Yeh,et al.  Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys , 2015 .

[59]  R. Caram,et al.  Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys , 2014 .

[60]  A. Alfantazi,et al.  Ion release and surface oxide composition of AISI 316L, Co-28Cr-6Mo, and Ti-6Al-4V alloys immersed in human serum albumin solutions. , 2014, Materials science & engineering. C, Materials for biological applications.

[61]  S. Qu,et al.  New Developments of Ti-Based Alloys for Biomedical Applications , 2014, Materials.

[62]  E. Pellicer,et al.  Novel Ti–Zr–Hf–Fe Nanostructured Alloy for Biomedical Applications , 2013, Materials.

[63]  S. Dai,et al.  Influence of Zr content on microstructure and mechanical properties of implant Ti–35Nb–4Sn–6Mo–xZr alloys , 2013 .

[64]  A. I. Muñoz,et al.  Wear of CoCrMo alloys used in metal-on-metal hip joints: A tribocorrosion appraisal , 2013 .

[65]  M. Niinomi,et al.  Development of new metallic alloys for biomedical applications. , 2012, Acta biomaterialia.

[66]  Weimin Zhu,et al.  Titanium carbide and its core-shelled derivative TiC@TiO2 as catalyst supports for proton exchange membrane fuel cells , 2012 .

[67]  Yufeng Zheng,et al.  Microstructure, corrosion behavior and cytotoxicity of Zr-Nb alloys for biomedical application , 2012 .

[68]  C. Woodward,et al.  Microstructure and Room Temperature Properties of a High-Entropy TaNbHfZrTi Alloy (Postprint) , 2011 .

[69]  D. Miracle,et al.  Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .

[70]  P. Liaw,et al.  Refractory high-entropy alloys , 2010 .

[71]  R. Suzuki,et al.  Direct Production of Ti–29Nb–13Ta–4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl2 , 2010 .

[72]  Yoshimitsu Okazaki,et al.  Metal release from stainless steel, Co-Cr-Mo-Ni-Fe and Ni-Ti alloys in vascular implants , 2008 .

[73]  Arif Hasan Khan Robin,et al.  Corrosion behavior of Ti‐xNb‐13Zr alloys in Ringer's solution , 2008 .

[74]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[75]  M. Metikoš-huković,et al.  The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. , 2003, Biomaterials.

[76]  Mitsuo Niinomi,et al.  Recent metallic materials for biomedical applications , 2002 .

[77]  H. Liao,et al.  Influence of titanium ion on mineral formation and properties of osteoid nodules in rat calvaria cultures. , 1999, Journal of biomedical materials research.

[78]  T. Hanawa.  In vivo metallic biomaterials and surface modification , 1999 .

[79]  E. Mccafferty,et al.  An X-ray photoelectron spectroscopy sputter profile study of the native air-formed oxide film on titanium , 1999 .

[80]  M. Jiang,et al.  Lattice distortion and magnetic property of high entropy alloys at low temperatures , 2022, Journal of Materials Science & Technology.

[81]  A. Anawati,et al.  Effect of Sn on corrosion resistance and modulus young of as-cast Ti-Nb-Sn alloys for biocompatible implant , 2020 .

[82]  Sheng Guo,et al.  Corrosion behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy in aqueous chloride solutions , 2019, Electrochemistry Communications.

[83]  Ping Zhang,et al.  Concurrence of spinodal decomposition and nano-phase precipitation in a multi-component AlCoCrCuFeNi high-entropy alloy , 2019, Journal of Materials Research and Technology.

[84]  D. Dolinar,et al.  Surface chemistry and microstructure of metallic biomaterials for hip and knee endoprostheses , 2018 .

[85]  R. Arrabal,et al.  Stability of plasma electrolytic oxidation coating on titanium in artificial saliva , 2012, Journal of Materials Science: Materials in Medicine.

[86]  M. Stern,et al.  Electrochemical Polarization I . A Theoretical Analysis of the Shape of Polarization Curves , 1957 .