Passive Safety Systems of Advanced Nuclear Power Plant: AP1000

In the entire history of commercial nuclear power so far, only two major accidents leading to damage of reactor core have taken place. One is Three Mile Island (TMT) accident (1979), which is caused by a series of human error, and the other is Chernobyl accident (1986), which is due to the combined reason of design defects and human errors. After TMI and Chernobyl accidents, in order to reduce manpower in operation and maintenance and influence of human errors on reactor safety, consideration is given to utilization of passive safety systems. According to the IAEA definition, passive safety systems are based on natural forces, such as convection and gravity, and stored energy, making safety functions less dependent on active systems and operators’ action. Recently, the technology of passive safety has been adopted in many reactor designs, such as AP1000, developed by Westinghouse and EP1000 developed by European vendor, and so on. AP1000 as the first so-called Generation III+ has received the final design approval from US NRC in September 2004, and now being under construction in Sanmen, China. In this paper, the major passive safety systems of AP1000, including passive safety injection system, automatic depressurization system passive residual heat removal system and passive containment cooling system, are described and their responses to a break loss-of-coolant accident (LOCA) are given. Just due to these passive systems’ adoption, the nuclear plant can be able to require no operator action and offsite or onsite AC power sources for at least 72h when one accident occurs, and the core melt and large release frequencies are significantly below the requirement of operating plants and the NRC safety goals.Copyright © 2010 by ASME