Enhanced circuit for linear ring VCO‐ADCs

Recently an extremely linear voltage-controlled ring-oscillator for use in VCO-ADCs was proposed by Babaie-Fishani and Rombouts. In this current Letter, a circuit-level technique to improve the bandwidth and noise performance of such a linear VCO is proposed. The key element is the modified delay cell, where the traditional cross-coupled inverters are modified into ` feed-forward' coupling inverters that pre-charge the subsequent elements in the ring. The resulting circuit maintains the excellent linearity, but has greatly enhanced bandwidth (up to 3 times higher) and considerably reduced power for the same circuit noise level (up to 2.5 times lower).

[1]  Jaewook Kim,et al.  Analysis and Design of Voltage-Controlled Oscillator Based Analog-to-Digital Converter , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[2]  Marius Neag,et al.  New dual-loop topology for ring VCOs based on latched delay cells , 2018, 2018 IEEE International Symposium on Circuits and Systems (ISCAS).

[3]  Pieter Rombouts,et al.  A Pulse Frequency Modulation Interpretation of VCOs Enabling VCO-ADC Architectures With Extended Noise Shaping , 2018, IEEE Transactions on Circuits and Systems I: Regular Papers.

[4]  A.A. Abidi,et al.  Phase Noise and Jitter in CMOS Ring Oscillators , 2006, IEEE Journal of Solid-State Circuits.

[5]  Pieter Rombouts,et al.  Highly linear VCO for use in VCO-ADCs , 2016 .

[6]  Ion Vornicu,et al.  Arrayable Voltage-Controlled Ring-Oscillator for Direct Time-of-Flight Image Sensors , 2017, IEEE Transactions on Circuits and Systems I: Regular Papers.