Polymer ferroelectret based on polypropylene foam: piezoelectric properties prediction using dynamic mechanical analysis

Thin polypropylene (PP) foam films were produced by continuous extrusion using supercritical nitrogen (N2) and then charged via corona discharge. The samples were characterized by dynamic mechanical analysis as a simple method to predict the piezoelectric properties of the cellular PP obtained. The results were then related to morphological analysis based on scanning electron microscopy and mechanical properties in tension. The results showed that the presence of a nucleating agent (CaCO3) substantially improved the morphology (in terms of cell size and cell density) of the produced foam. Also, an optimization of the extrusion (screw design, temperature profile, blowing agent, and nucleating agent content) and post-extrusion (calendering temperature and speed) conditions led to the development of a stretched eye-like cellular structure with uniform cell size distribution. This morphology produced higher storage and loss moduli in the machine (longitudinal) direction than for the transverse direction, as well as higher piezoelectric properties. The morphological and mechanical results showed that higher cell aspect ratio led to lower Young's modulus, which is suitable to achieve higher piezoelectric properties. Finally, the best quasi-static piezoelectric d33 coefficient was 550 pC/N for a cellular PP ferroelectret having a uniform eye-like cellular structure using N2 as the ionizing gas inside the cells, while the highest value was only 250 pC/N when air was used. Hence, the value of d33 can be improved by more than 100% just by replacing air with N2 as the ionizing gas. Copyright © 2016 John Wiley & Sons, Ltd.

[1]  Hanxiong Huang,et al.  Preparation of microcellular polypropylene/polystyrene blend foams with tunable cell structure , 2011 .

[2]  Richard Gendron,et al.  Thermoplastic Foam Processing : Principles and Development , 2004 .

[3]  M. Sain,et al.  Investigating the Mechanical Response of Soy-Based Polyurethane Foams with Glass Fibers under Compression at various Rates , 2015 .

[4]  D. Rodrigue,et al.  Morphology development of polypropylene cellular films for piezoelectric applications , 2012 .

[5]  Abdellah Ajji,et al.  Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties , 2018 .

[6]  D. Guyomar,et al.  Energy harvesting using hybridization of dielectric nanocomposites and electrets , 2015 .

[7]  Werner Wirges,et al.  Piezoelectric Polyethylene Terephthalate (PETP) Foams – Specifically Designed and Prepared Ferroelectret Films , 2005 .

[8]  Chih-Jer Lin,et al.  Tracking control of a biaxial piezo-actuated positioning stage using generalized Duhem model , 2012, Comput. Math. Appl..

[9]  A. Mehrabani-Zeinabad,et al.  Dynamic behavior of nucleation in supercritical N_2 foaming of polystyrene-aluminum oxide nanocomposite , 2011 .

[10]  E. Tuncer.  Numerical calculations of effective elastic properties of two cellular structures , 2004, cond-mat/0404166.

[11]  Huining Xiao,et al.  A novel strategy for the preparation of long chain branching polypropylene and the investigation on foamability and rheology , 2012 .

[12]  Werner Wirges,et al.  Controlled inflation of voids in cellular polymer ferroelectrets: Optimizing electromechanical transducer properties , 2004 .

[13]  Xiaoqing Zhang,et al.  Piezoelectric properties of irradiation-crosslinked polypropylene ferroelectrets , 2007 .

[14]  Xiaoqing Zhang,et al.  Low‐Cost, Large‐Area, Stretchable Piezoelectric Films Based on Irradiation‐Crosslinked Poly(propylene) , 2014 .

[15]  Ping Zhang,et al.  Effect of dynamic shear on the microcellular foaming of polypropylene/high‐density polyethylene blends , 2009 .

[16]  Xiaoqing Zhang,et al.  Thermally stable fluorocarbon ferroelectrets with high piezoelectric coefficient , 2006 .

[17]  H. Münstedt,et al.  Foaming of thin films of a fluorinated ethylene propylene copolymer using supercritical carbon dioxide , 2009 .

[18]  Ryan Gosselin,et al.  Cell morphology analysis of high density polymer foams , 2005 .

[19]  Xiaoqing Zhang,et al.  Improvement of piezoelectric activity of cellular polymers using a double-expansion process , 2004 .

[20]  Chenyang Yu,et al.  Evaluating the foamability of polypropylene with nitrogen as the blowing agent , 2011 .

[21]  S. Bauer,et al.  Charged cellular polymers with "ferroelectretic" behavior , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[22]  Ping Liu,et al.  Preparation of high performance foams with excellent dielectric property based on toughened bismaleimide resin , 2011 .

[23]  Werner Wirges,et al.  Penetration of sulfur hexafluoride into cellular polypropylene films and its effect on the electric charging and electromechanical response of ferroelectrets , 2005 .

[24]  Peng Fang,et al.  Cellular polyethylene-naphthalate films for ferroelectret applications: foaming, inflation and stretching, assessment of electromechanically relevant structural features , 2008 .

[25]  Jukka Lekkala,et al.  ElectroMechanical Film (EMFi) — a new multipurpose electret material , 2000 .

[26]  Xiaoqing Zhang,et al.  Fluoroethylenepropylene ferroelectret films with cross-tunnel structure for piezoelectric transducers and micro energy harvesters , 2014 .

[27]  J. Fages,et al.  Effect of supercritical carbon dioxide on polystyrene extrusion , 2007 .

[28]  Xiaoqing Zhang,et al.  Mechanical and piezoelectric performance of cross-linked polypropylene films treated with extending , 2015 .

[29]  Reimund Gerhard-Multhaupt,et al.  Less can be more. Holes in polymers lead to a new paradigm of piezoelectric materials for electret transducers , 2002 .

[30]  Xiaoqing Zhang,et al.  Quasi-static and dynamic piezoelectric d33 coefficients of irradiation cross-linked polypropylene ferroelectrets , 2009, Journal of Materials Science.

[31]  Xiaoqing Zhang,et al.  Verification of a model for the piezoelectric d33-coefficient of cellular electret films , 2005 .

[32]  Huaxin Rao,et al.  Graft copolymerization of maleic anhydride/styrene onto isotactic polypropylene using supercritical CO2 , 2008 .

[33]  Y. Tajitsu.  Development of electric control catheter and tweezers for thrombosis sample in blood vessels using piezoelectric polymeric fibers , 2006 .

[34]  S-T. Lee,et al.  Foam extrusion : principles and practice , 2000 .

[35]  S. Lang,et al.  Review of some lesser-known applications of piezoelectric and pyroelectric polymers , 2006 .

[36]  K. Kirjavainen,et al.  Electrothermomechanical Film. Part I. Design and Characteristics , 1989 .

[37]  R. Gerhard-Multhaupt,et al.  Piezoelectrets from thermo-formed bubble structures of fluoropolymer-electret films , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[38]  M. Bousmina,et al.  Cellular polypropylene‐based piezoelectric films , 2012 .

[39]  Peng Fang,et al.  Cellular polyethylene-naphthalate ferroelectrets: Foaming in supercritical carbon dioxide, structural and electrical preparation, and resulting piezoelectricity , 2007 .

[40]  Bai-Xiang Xu,et al.  Continuum modeling of charging process and piezoelectricity of ferroelectrets , 2013 .

[41]  R. Mülhaupt,et al.  Influence of graphene on the cell morphology and mechanical properties of extruded polystyrene foam , 2015 .

[42]  Z. Xia,et al.  Piezoelectric coefficients of cross-linked polypropylene films stretched at elevated temperatures , 2011 .

[43]  Michael Wegener,et al.  Understanding the role of the gas in the voids during corona charging of cellular electret films - a way to enhance their piezoelectricity , 2001 .

[44]  Alper Erturk,et al.  Piezoelectret foam–based vibration energy harvesting , 2014 .

[45]  Vigor Yang,et al.  CRYOGENIC FLUID JETS AND MIXING LAYERS IN TRANSCRITICAL AND SUPERCRITICAL ENVIRONMENTS , 2006 .

[46]  Zhimin Liu,et al.  Preparation of nanometer dispersed polypropylene/polystyrene interpenetrating network using supercritical CO2 as a swelling agent , 2002 .

[47]  J. Velasco,et al.  Study of the Influence of the Pressure Drop Rate on the Foaming Behavior and Dynamic-Mechanical Properties of CO2 Dissolution Microcellular Polypropylene Foams , 2010 .

[48]  Barbara L. Knutson,et al.  Supercritical fluids as solvents for chemical and materials processing , 1996, Nature.

[49]  X. Qiu,et al.  Piezoelectricity of single-and multi-layer cellular polypropylene film electrets , 2007 .