Diamond-like carbon-deposited films: a new class of biocorrosion protective coatings

[1]  Aleksandra M Urbanska,et al.  Agarose-based biomaterials for tissue engineering. , 2018, Carbohydrate polymers.

[2]  A. Urbanska,et al.  A facile route to the synthesis of anilinic electroactive colloidal hydrogels for neural tissue engineering applications. , 2018, Journal of colloid and interface science.

[3]  DerakhshandehMohammad Reza,et al.  Diamond-like carbon thin films prepared by pulsed-DC PE-CVD for biomedical applications , 2018 .

[4]  S. Khamseh,et al.  Magnetron-sputtered copper/diamond-like carbon composite thin films with super anti-corrosion properties , 2018 .

[5]  M. Ganjali,et al.  A Novel Electroactive Agarose-Aniline Pentamer Platform as a Potential Candidate for Neural Tissue Engineering , 2017, Scientific Reports.

[6]  S. Khamseh,et al.  High-performance hybrid coatings based on diamond-like carbon and copper for carbon steel protection , 2017 .

[7]  A. Zamanian,et al.  Antibacterial glass-ionomer cement restorative materials: A critical review on the current status of extended release formulations. , 2017, Journal of controlled release : official journal of the Controlled Release Society.

[8]  Mohammad Reza Saeb,et al.  Can regenerative medicine and nanotechnology combine to heal wounds? The search for the ideal wound dressing. , 2017, Nanomedicine.

[9]  H. H. Caicedo,et al.  Evaluation of Mechanical and Tribological Properties of Coatings for Stainless Steel , 2017 .

[10]  F. Tarlochan,et al.  Corrosion and surface modification on biocompatible metals: A review. , 2017, Materials science & engineering. C, Materials for biological applications.

[11]  P. Zarrintaj,et al.  A novel bio electro active alginate-aniline tetramer/ agarose scaffold for tissue engineering: synthesis, characterization, drug release and cell culture study , 2017, Journal of biomaterials science. Polymer edition.

[12]  C. Sukotjo,et al.  Ultrananocrystalline diamond coatings for the dental implant: Electrochemical nature , 2017 .

[13]  T. Mohanty,et al.  Coexistence of interfacial stress and charge transfer in graphene oxide-based magnetic nanocomposites , 2017, Journal of Materials Science.

[14]  M. Mozafari,et al.  Improved electrochemical performance of nitrocarburised stainless steel by hydrogenated amorphous carbon thin films for bone tissue engineering , 2017 .

[15]  K. Zhou,et al.  Influence of Third Particle on the Tribological Behaviors of Diamond-like Carbon Films , 2016, Scientific Reports.

[16]  N. Huang,et al.  Biological responses of diamond-like carbon (DLC) films with different structures in biomedical application. , 2016, Materials science & engineering. C, Materials for biological applications.

[17]  MozafariMasoud,et al.  Discussion: Fracture safety of double-porous hydroxyapatite biomaterials , 2016 .

[18]  U. Maver,et al.  Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications , 2016, Scientific Reports.

[19]  R. Burgkart,et al.  Silver nanoparticle-enriched diamond-like carbon implant modification as a mammalian cell compatible surface with antimicrobial properties , 2016, Scientific Reports.

[20]  Chih-hao Liang,et al.  The influence of substrate bias voltages on structure, mechanical properties and anti-corrosion performance of Cr doped diamond-like carbon films deposited by steered cathodic arc evaporation , 2015 .

[21]  Dae-Eun Kim,et al.  Water Lubrication of Stainless Steel using Reduced Graphene Oxide Coating , 2015, Scientific Reports.

[22]  Dong-bai Sun,et al.  The passive oxide films growth on 316L stainless steel in borate buffer solution measured by real-time spectroscopic ellipsometry , 2015 .

[23]  N. Huang,et al.  Wear and corrosion properties of diamond like carbon (DLC) coating on stainless steel, CoCrMo and Ti6Al4V substrates , 2015 .

[24]  J. Tu,et al.  Influence of duty cycle on microstructure, tribological and corrosion behaviors of a-C/a-C:Ti multilayer films , 2015 .

[25]  A. Stoica,et al.  Cell proliferation on modified DLC thin films prepared by plasma enhanced chemical vapor deposition. , 2015, Biointerphases.

[26]  K. Komvopoulos,et al.  Friction properties of amorphous carbon ultrathin films deposited by filtered cathodic vacuum arc and radio-frequency sputtering , 2015 .

[27]  N. Huang,et al.  Effect of modulation periods on the microstructure and mechanical properties of DLC/TiC multilayer films deposited by filtered cathodic vacuum arc method , 2015 .

[28]  Shih-Hsien Chang,et al.  Investigation of the characteristics of DLC films on oxynitriding-treated ASP23 high speed steel by DC-pulsed PECVD process , 2015 .

[29]  W. Ensinger,et al.  Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation and deposition , 2014 .

[30]  Y. Konttinen,et al.  Osteogenic differentiation on DLC-PDMS-h surface. , 2014, Journal of biomedical materials research. Part B, Applied biomaterials.

[31]  R. Hauert,et al.  An overview on diamond-like carbon coatings in medical applications , 2013 .

[32]  K. Ou,et al.  Surface properties of copper-incorporated diamond-like carbon films deposited by hybrid magnetron sputtering , 2013 .

[33]  S. Madihally,et al.  Surface modification of stainless steel orthopedic implants by sol-gel ZrTiO4 and ZrTiO4-PMMA coatings. , 2013, Journal of biomedical nanotechnology.

[34]  S. Madihally,et al.  In Vitro Electrochemical Corrosion and Cell Viability Studies on Nickel-Free Stainless Steel Orthopedic Implants , 2013, PloS one.

[35]  D. Vashaee,et al.  A new double-layer sol–gel coating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid , 2013 .

[36]  Y. Konttinen,et al.  Osteogenesis of human mesenchymal stem cells on micro-patterned surfaces , 2013, Journal of biomaterials applications.

[37]  Enric Bertran,et al.  Ion energy distributions in bipolar pulsed-dc discharges of methane measured at the biased cathode , 2011 .

[38]  Jose L. Endrino,et al.  Design and rapid prototyping of DLC coated fractal surfaces for tissue engineering applications , 2010 .

[39]  S. Khamseh,et al.  Influence of total gas pressure on the microstructure and properties of CrAlN films deposited by a pulsed DC balanced magnetron sputtering system , 2010 .

[40]  M. Staia,et al.  Corrosion performance of the plasma nitrided 316L stainless steel , 2006 .

[41]  L. Santos,et al.  Adhesion studies of diamond-like carbon films deposited on Ti6Al4V substrate with a silicon interlayer , 2006 .

[42]  F. Hong,et al.  Structure and properties of diamond-like carbon nanocomposite films containing copper nanoparticles , 2005 .

[43]  F. P. Ijsseling.  Application of electrochemical methods of corrosion rate determination to systems involving corrosion product layers: Part 1: Linear polarization resistance measurement as an example of a simple method that can be performed with commercially available instruments , 1986 .