Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Abstract High entropy alloy (HEA) is an emerging class of engineering materials that shows promising potential for high temperature applications. These multi-component alloys are mostly fabricated by arc melting. In this study, direct laser fabrication (DLF) is utilized to prepare AlCoCrFeNi high entropy alloy at optimized operation parameters. The phase, microstructure, mechanical and corrosion properties of as-deposited alloy as well as samples aged at temperatures of 600 °C, 800 °C, 1000 °C and 1200 °C for 168 h have been investigated. The results show that high cooling rate during deposition inhibits the formation of FCC phase, leading to a nearly single B2 solid solution structure for as-deposited sample. After ageing at 800 °C, 1000 °C and 1200 °C, the microstructures exhibit intergranular needle-like and plate-like FCC phase precipitates and wall shaped FCC phase precipitates along grain boundaries. As the FCC phase is softer than B2 phase, the formation of the FCC phase during ageing results in reduced compressive yield strength accompanied with enhanced ductility. The potential difference between Fe-Cr rich FCC phase and Al-Ni rich B2 matrix means the alloy is susceptible to galvanic corrosion, with the B2 matrix corroding preferentially.

[1]  C. Liu,et al.  Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys , 2011 .

[2]  Krzysztof J. Kurzydłowski,et al.  Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping , 2015 .

[3]  A. G. McGregor,et al.  Predicting the formation and stability of single phase high-entropy alloys , 2016 .

[4]  Xing-wu Qiu,et al.  Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy , 2013 .

[5]  Xinhua Wu,et al.  Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys , 2015 .

[6]  Lin Li,et al.  Synthesis and Characterization of High-Entropy Alloy AlFeCoNiCuCr by Laser Cladding , 2011 .

[7]  Min Ho Lee,et al.  Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel , 2013 .

[8]  J. Mei,et al.  Direct laser fabrication of Ti6Al4V/TiB , 2008 .

[9]  B. Cantor.  High-Entropy Alloys , 2011 .

[10]  Jien-Wei Yeh,et al.  Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys , 2012 .

[11]  C. Liu,et al.  More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase , 2013 .

[12]  Weidong Huang,et al.  Composition control for laser solid forming from blended elemental powders , 2009 .

[13]  Chuan Zhang,et al.  Computational Thermodynamics Aided High-Entropy Alloy Design , 2012, JOM.

[14]  E. George,et al.  Tensile properties of high- and medium-entropy alloys , 2013 .

[15]  Y. Zhou,et al.  Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties , 2007 .

[16]  Xin Lin,et al.  Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process , 2013, Metallurgical and Materials Transactions A.

[17]  Shou-Yi Chang,et al.  Mechanical properties, deformation behaviors and interface adhesion of (AlCrTaTiZr)Nx multi-component coatings , 2010 .

[18]  Swe-Kai Chen,et al.  Electrochemical passive properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) alloys in sulfuric acids , 2010 .

[19]  Karin A. Dahmen,et al.  Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems , 2013 .

[20]  J. Yeh,et al.  On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys , 2011 .

[21]  J. Yeh,et al.  Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys , 2012 .

[22]  Jien-Wei Yeh,et al.  The microstructure and strengthening mechanism of thermal spray coating NixCo0.6Fe0.2CrySizAlTi0.2 high-entropy alloys , 2011 .

[23]  J. Mei,et al.  Microstructure study of direct laser fabricated Ti alloys using powder and wire , 2006 .

[24]  Hui Zhang,et al.  Effects of Annealing on the Microstructure and Properties of 6FeNiCoCrAlTiSi High-Entropy Alloy Coating Prepared by Laser Cladding , 2011 .

[25]  T. Chin,et al.  Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements , 2004 .

[26]  D. Miracle,et al.  Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .

[27]  Jing Liang,et al.  Microstructures of laser-deposited Ti–6Al–4V , 2004 .

[28]  E-Wen Huang,et al.  Microstructural Characteristics and Mechanical Behaviors of AlCoCrFeNi High-Entropy Alloys at Ambient and Cryogenic Temperatures , 2011 .

[29]  J. Yeh,et al.  Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition , 2004 .

[30]  Z. Fu,et al.  Alloying behavior and deformation twinning in a CoNiFeCrAl0.6Ti0.4 high entropy alloy processed by spark plasma sintering , 2013 .

[31]  C. Woodward,et al.  Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy , 2012, Journal of Materials Science.

[32]  T. Chin,et al.  Amorphization of equimolar alloys with HCP elements during mechanical alloying , 2010 .

[33]  H. Fraser,et al.  The influence of the enthalpy of mixing during the laser deposition of complex titanium alloys using elemental blends , 2003 .

[34]  M. von Walter,et al.  Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.

[35]  J. Yeh,et al.  Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys , 2011 .

[36]  T. Shun,et al.  Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating , 2004 .

[37]  J. Yeh,et al.  Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys , 2009 .

[38]  Charlie R. Brooks,et al.  Failure Analysis of Engineering Materials , 2001 .

[39]  Peter C. Collins,et al.  Direct laser deposition of alloys from elemental powder blends , 2001 .

[40]  P. Liaw,et al.  Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization , 2015 .

[41]  B. Murty,et al.  Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys , 2012 .

[42]  Weimin Wang,et al.  Mechanical alloying synthesis and spark plasma sintering consolidation of CoCrFeNiAl high-entropy alloy , 2014 .

[43]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[44]  Yong Zhang,et al.  Prediction of high-entropy stabilized solid-solution in multi-component alloys , 2012 .

[45]  J. Yeh,et al.  High-Entropy Alloys: A Critical Review , 2014 .

[46]  K. Niihara,et al.  Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying , 2010 .

[47]  Jerzy Bystrzycki,et al.  Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS) , 2014 .

[48]  L. Edwards,et al.  Segregation and migration of species in the CrCoFeNi high entropy alloy , 2014 .

[49]  J. Yeh,et al.  Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures , 2014 .

[50]  Yong Zhang,et al.  Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy , 2012 .