Preparation and performance of Sn-based composite solder joints by solid-liquid low-temperature solder bonding technology

[1]  L. Zhang,et al.  Mechanical properties and microstructure evolution of Cu/Sn58Bi/Cu solder joint reinforced by B4C nanoparticles , 2023, Journal of Materials Research and Technology.

[2]  Y. Liu,et al.  Growth Behavior and Reliability of Interfacial Imc for Sn58bi/Cu and Sn58bi-Aln/Cu Solder Joints Applied in Igbt Modules , 2022, SSRN Electronic Journal.

[3]  L. Zhang,et al.  Enhancement of structure and properties of Sn58Bi solder by AlN ceramic particles , 2022, Journal of Materials Research and Technology.

[4]  Y. Liu,et al.  A New Low-Temperature Solder Assembly Technique to Replace Eutectic Sn-Bi Solder Assembly , 2022, Micromachines.

[5]  H. Nishikawa,et al.  Microstructure Evolution and Shear Strength of Tin-Indium-xCu/Cu Joints , 2021, Metals.

[6]  Sinn-wen Chen,et al.  Phase diagram of Ag–Pb–Sn system , 2020 .

[7]  K. Tu,et al.  Low melting point solders based on Sn, Bi, and In elements , 2020 .

[8]  H. Nishikawa,et al.  Sn-3.0Ag-0.5Cu/Sn-58Bi composite solder joint assembled using a low-temperature reflow process for PoP technology , 2019, Materials & Design.

[9]  F. Sun,et al.  Effect of isothermal aging on the microstructure, shear behavior and hardness of the Sn58Bi/Sn3.0Ag0.5Cu/Cu solder joints , 2019 .

[10]  M. Huang,et al.  Abnormal migration behavior and segregation mechanism of Bi atoms undergoing liquid–solid electromigration , 2019, Journal of Materials Science.

[11]  Fengman Liu,et al.  Thermo-mechanical reliability analysis of a RF SiP module based on LTCC substrate , 2017, Microelectron. Reliab..

[12]  Menglu Li,et al.  Effect of Joule heating and current crowding on electromigration in mobile technology , 2017 .

[13]  K. Tu,et al.  Scaling effect of interfacial reaction on intermetallic compound formation in Sn/Cu pillar down to 1 μm diameter , 2016 .

[14]  W. Zhou,et al.  Effects of Ni addition on mechanical properties of Sn58Bi solder alloy during solid-state aging , 2016 .

[15]  K. Tu,et al.  Synergistic effect of electromigration and Joule heating on system level weak-link failure in 2.5D integrated circuits , 2015 .

[16]  Feng Xue,et al.  Effect of In on microstructure, thermodynamic characteristic and mechanical properties of Sn–Bi based lead-free solder , 2015 .

[17]  N. Tamura,et al.  A metastable phase of tin in 3D integrated circuit solder microbumps , 2015 .

[18]  A. A. El-Daly,et al.  Development of new multicomponent Sn–Ag–Cu–Bi lead-free solders for low-cost commercial electronic assembly , 2015 .

[19]  S. Gu.  Material innovation opportunities for 3D integrated circuits from a wireless application point of view , 2015 .

[20]  Samjid H. Mannan,et al.  A review: On the development of low melting temperature Pb-free solders , 2014, Microelectron. Reliab..

[21]  Guoqiang Li,et al.  Influence of TiO2 nanoparticles on IMC growth in Sn–3.0Ag–0.5Cu–xTiO2 solder joints in reflow process , 2013 .

[22]  R. Arróyave,et al.  Concurrent nucleation, formation and growth of two intermetallic compounds (Cu6Sn5 and Cu3Sn) during the early stages of lead-free soldering , 2012 .

[23]  Michael Clode,et al.  Intermetallic compound growth suppression at high temperature in SAC solders with Zn addition on Cu and Ni–P substrates , 2012 .

[24]  F. Song,et al.  Effect of interfacial strength between Cu6Sn5 and Cu3Sn intermetallics on the brittle fracture failure of lead-free solder joints with OSP pad finish , 2011, 2011 IEEE 61st Electronic Components and Technology Conference (ECTC).

[25]  K. N. Tu,et al.  Reliability challenges in 3D IC packaging technology , 2011, Microelectron. Reliab..

[26]  Christopher Mark Johnson,et al.  Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process , 2011 .

[27]  Jian Ku Shang,et al.  Growth mechanisms of Cu3Sn on polycrystalline and single crystalline Cu substrates , 2009 .

[28]  David A. Hutt,et al.  Interfacial reactions between molten Sn–Bi–X solders and Cu substrates for liquid solder interconnects , 2006 .

[29]  Kyung-Wook Paik,et al.  Solder reflow process induced residual warpage measurement and its influence on reliability of flip-chip electronic packages , 2006, Microelectron. Reliab..

[30]  Jian Xu,et al.  Demystifying 3D ICs: the pros and cons of going vertical , 2005, IEEE Design & Test of Computers.

[31]  J. Gardea-Torresdey,et al.  Use of hop (Humulus lupulus) agricultural by-products for the reduction of aqueous lead(II) environmental health hazards. , 2002, Journal of hazardous materials.

[32]  Thirumany Sritharan,et al.  Interface reaction between copper and molten tin–lead solders , 2001 .

[33]  Kyung-Wook Paik,et al.  Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems , 2000, ECTC 2000.

[34]  J. Goldstein,et al.  Microstructure and mechanical properties of Sn-In and Sn-Bi solders , 1993 .

[35]  J. W. Morris,et al.  Characterization of eutectic Sn-Bi solder joints , 1992 .

[36]  J. Morris,et al.  Microstructure and creep of eutectic indium/tin on copper and nickel substrates , 1992 .

[37]  H. Nishikawa,et al.  Improved mechanical properties induced by In and In & Zn double additions to eutectic Sn58Bi alloy , 2019, Journal of Materials Science: Materials in Electronics.

[38]  K. K. Tang,et al.  SOLDER JOINT RELIABILITY ON MIXED SAC-BISN BALL GRID ARRAY SOLDER JOINTS FORMED WITH RESIN REINFORCED BI-SN METALLURGY SOLDER PASTES , 2016 .