A Study of Taguchi and Design of Experiments Method in Injection Molding Process for Polypropylene Components

This study analyzes contour distortions, wear mass losses and tensile properties of polypropylene (PP) composite components applied to the interior coffer of automobiles. The specimens are prepared under different injection molding conditions by changing melting temperatures, injection speeds, and injection pressures via three computer-controlled progressive strokes. The contour distortions, wear and tensile properties are selected as quality targets. The arrangement of sixteen experiments is based on an orthogonal array table. Both the Taguchi method and the design of experiments (DOE) method are applied to determine an optimal parameter setting. In addition, a side-by-side comparison of two different approaches is provided. In this study, regression models that link the controlled parameters and the targeted outputs are developed, and the mathematic models can be utilized to predict the contour distortions, wear and tensile properties at various injection molding conditions.

[1]  Yung-Kuang Yang,et al.  Optimization of Injection-Molding Process for Mechanical and Tribological Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites with Grey Relational Analysis: A Case Study , 2006 .

[2]  L. An,et al.  Elongational Properties of Biaxially Oriented Polypropylenes with Different Processing Properties , 2005 .

[3]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[4]  Y. Tarng,et al.  Application of the Taguchi Method to the Optimization of the Submerged Arc Welding Process , 1998 .

[5]  Tony Lin,et al.  Quality Improvement of an Injection-Molded Product Using Design of Experiments: A Case Study , 2003 .

[6]  I. Puertas,et al.  A Study of Optimization of Machining Parameters for Electrical Discharge Machining of Boron Carbide , 2004 .

[7]  Jie-Ren Shie,et al.  Optimization of Injection Molding Process for Contour Distortions of Polypropylene Composite Components via Design of Experiments Method , 2006 .

[8]  The Influence of Processing Parameters on Thin-Wall Gas Assisted Injection Molding of Thermoplastic Materials , 2003 .

[9]  Hanafi Ismail,et al.  A Comparative Study of the Effect of Degradation on the Properties of PP/NR and PP/RR Blends , 2004 .

[10]  Andy M. Connor.  Parameter Sizing for Fluid Power Circuits Using Taguchi Methods , 1999 .

[11]  Y. D. Hwang,et al.  AN IMPROVED TAGUCHI'S METHOD IN DESIGN OF EXPERIMENTS FOR MILLING CFRP COMPOSITE , 1997 .

[12]  Yung-Kuang Yang,et al.  Optimization of a photo resists coating process for photolithography in wafer manufacturing via design of experiments method , 2006 .

[13]  Yung-Kuang Yang,et al.  Die-Casting Parameter Sizing for AZ91D in Notebook Computer Base Shell , 2006 .

[14]  Mohini Sain,et al.  Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products , 2005 .

[15]  M. Modesti,et al.  Effect of processing conditions on morphology and mechanical properties of compatibilized polypropylene nanocomposites , 2005 .

[16]  C. L. Lin,et al.  Use of the Taguchi Method and Grey Relational Analysis to Optimize Turning Operations with Multiple Performance Characteristics , 2004 .

[17]  S. Chen,et al.  Study on the Molding Characteristics and Mechanical Properties of Injection-molded Foaming Polypropylene Parts , 2004 .