Cam design handbook

Chapter 1: IntroductionChapter 2: Basic CurvesChapter 3: Modified Cam CurvesChapter 4: Polynomial and Fourier Series Cam CurvesChapter 5: Cam Motion Synthesis Using Spline FunctionsChapter 6: Elements of Cam Profile GeometryChapter 7: Geometry of Planer Cam ProfilesChapter 8: Cam Mechanism ForcesChapter 9: Cam Materials and LubricationChapter 10: Cam ManufacturingChapter 11: Cam System ModelingChapter 12: Cam System Dynamics -- AnalysisChapter 13: Cam System Dynamics -- ResponseChapter 14: Special Cam MechanismsChapter 15: Cams in Microelectromechanical SystemsChapter 16: Automotive Camshaft DynamicsAPPENDIX A: BASIC CONTOURSAPPENDIX B: BASIC CAM CURVE FACTORSAPPENDIX C: POLYNOMIAL COEFFICIENTSAPPENDIX D: CAM COMPUTER SOFTWAREAPPENDIX E: CAD/CAM FOR A MEDICAL INSTRUMENT CAM MECHANISMAPPENDIX F: OPTIMAL CONTROL THEORY DERIVATION FOR TWO-POINT BOUNDARY VALUE PROBLEMINDEX

[1]  K. Itao,et al.  Polydyne Cam Mechanisms for Typehead Positioning , 1972 .

[2]  Jorge Angeles,et al.  The Evaluation of Moments of 3-D Solids of Revolution Using Spline Approximations of the Boundary , 1990 .

[3]  Jorge Angeles,et al.  The Calculation of the Volumetric Properties of Sweep-Generated Solids Via Line Integration , 1993 .

[4]  W. R. Newcombe,et al.  The effect of cam profile errors and system flexibility on cam mechanism output , 1982 .

[5]  I. Faux,et al.  Computational Geometry for Design and Manufacture , 1979 .

[6]  B. Finlayson,et al.  Orthogonal collocation on finite elements , 1975 .

[7]  B. L. Hulme,et al.  COLODE: a collocation subroutine for ordinary differential equations , 1974 .

[8]  F. Y. Chen.  Analysis and Design of Cam-Driven Mechanisms With Nonlinearities , 1973 .

[9]  Q. Jeffrey Ge,et al.  Fine tuning of rational B-spline motions , 1997, DAC 1997.

[10]  Jeremy A. Walraven,et al.  MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes , 2000 .

[11]  Singiresu S Rao,et al.  CAM motion synthesis using cubic splines , 1991, DAC 1991.

[12]  D. J. Maas,et al.  CAM-FOLLOWER, CUTTER-WORKPIECE INTERACTION IN AIRFOIL MILLING MACHINES. , 1983 .

[13]  Wayne Tiller,et al.  Rational B-Splines for Curve and Surface Representation , 1983, IEEE Computer Graphics and Applications.

[14]  R. Rosenberg,et al.  System Dynamics: Modeling and Simulation of Mechatronic Systems , 2006 .

[15]  Bernard Roth,et al.  Dynamic Synthesis of Cams Using Finite Trigonometric Series , 1975 .

[16]  Arthur Brown,et al.  Discussion on , 1908 .

[17]  F. Freudenstein,et al.  Application of Optimal Control Theory to the Synthesis of High-Speed Cam-Follower Systems. Part 1: Optimality Criterion , 1983 .

[18]  Franklin D Jones,et al.  Ingenious mechanisms for designers and inventors : mechanisms and mechanical movements selected from automatic machines and various other forms of mechanical apparatus as outstanding examples of ingenious design embodying ideas or principles applicable in designing machines or devices requiring auto , .

[19]  Kenneth James Versprille.  Computer-aided design applications of the rational b-spline approximation form. , 1975 .

[20]  Dean Karnopp,et al.  Computer simulation of stick-slip friction in mechanical dynamic systems , 1985 .

[21]  J. L. Wiederrich.  Residual Vibration Criteria Applied to Multiple Degree of Freedom Cam Followers , 1981 .

[22]  Bernard Friedland,et al.  Advanced Control System Design , 1996 .

[23]  C. D. Boor,et al.  Collocation at Gaussian Points , 1973 .

[24]  Bernard Friedland,et al.  On the Modeling and Simulation of Friction , 1990, 1990 American Control Conference.

[25]  K. Weiss.  Vibration Problems in Engineering , 1965, Nature.

[26]  D. J. Wulpi,et al.  Understanding How Components Fail , 1985 .

[27]  Ferdinand Freudenstein.  On the dynamics of high-speed cam profiles , 1960 .

[28]  Phillip Barkan,et al.  Kinematics and Dynamics of Planar Machinery , 1979 .

[29]  K. Wright,et al.  Some relationships between implicit Runge-Kutta, collocation and Lanczosτ methods, and their stability properties , 1970 .

[30]  Robert L. Norton.  Effect of manufacturing method on dynamic performance of cams—An experimental study. part I—eccentric cams , 1988 .

[31]  G. Kovacs.  Micromachined Transducers Sourcebook , 1998 .

[32]  M. C. Turkish,et al.  Relationship of Valve-Spring Design to Valve Gear Dynamics and Hydraulic Lifter Pump-up , 1953 .

[33]  Lawrence F. Shampine,et al.  A User’s View of Solving Stiff Ordinary Differential Equations , 1979 .

[34]  Robert D. Russell,et al.  A COMPARISON OF COLLOCATION AND FINITE DIFFERENCES FOR TWO-POINT BOUNDARY VALUE PROBLEMS* , 1977 .

[35]  Sanjay G. Dhande,et al.  A Unified Approach to the Analytical Design of Three-Dimensional Cam Mechanisms , 1975 .

[36]  A. Titolo,et al.  The Variable Valve Timing System - Application on a V8 Engine , 1991 .

[37]  M. Mayourian,et al.  Energy Efficient Cam-Follower Systems , 1983 .

[38]  K. H. Hunt,et al.  Coefficient of Restitution Interpreted as Damping in Vibroimpact , 1975 .

[39]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.

[40]  E. Rabinowicz,et al.  Friction and Wear of Materials , 1966 .

[41]  Der Min Tsay,et al.  Application of the Theory of Envelope to the Determination of Camoid Profiles With Translating Followers , 1994 .

[42]  M. Savage,et al.  The Characterization of Cam Drive System Windup , 1980 .

[43]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[44]  Ferdinand Jehle,et al.  Idiosyncrasies of Valve Mechanisms and Their Causes , 1929 .

[45]  T. E. Tallian,et al.  Ball bearing lubrication: The elastohydrodynamics of elliptical contacts , 1982 .

[46]  Jorge Angeles,et al.  The Design of a Novel Mechanical Transmission for Speed Reduction , 1999 .

[47]  Sanjay G. Dhande,et al.  Synthesis of Wrapping Cams , 1994 .

[48]  R. Layton.  Principles of Analytical System Dynamics , 1998 .

[49]  Jeffrey P. Chrstos,et al.  Vehicle Inertial Parameters-Measured Values and Approximations , 1988 .

[50]  M. Madou.  Fundamentals of microfabrication , 1997 .

[51]  Clarence W. de Silva,et al.  Vibration: Fundamentals and Practice , 1999 .

[52]  N. Polvanich,et al.  Dynamics of High-Speed Cam-Driven Mechanisms—Part 2: Nonlinear System Models , 1975 .

[53]  M. P. Koster,et al.  Effect of Flexibility of Driving Shaft on the Dynamic Behavior of a Cam Mechanism , 1975 .

[54]  Fan Y. Chen.  Mechanics and Design of Cam Mechanisms , 1982 .

[55]  Der Min Tsay,et al.  The Profile Determination and Machining of Camoids with Oscillating Spherical Followers , 1994 .

[56]  T D Gillespie,et al.  Fundamentals of Vehicle Dynamics , 1992 .

[57]  W. R. Newcombe,et al.  Dynamic performance of high-speed semi-rigid follower cam systems—effects of cam profile errors , 1988 .

[58]  T. R. Thoren,et al.  Cam Design as Related to Valve Train Dynamics , 1952 .

[59]  Hiroshi Sakai,et al.  A New Method of Valve Cam Design-HYSDYNE Cam , 1977 .

[60]  U. Ascher.  Solving Boundary-Value Problems with a Spline-Collocation Code , 1980 .

[61]  Hamilton Horth Mabie,et al.  Mechanisms and Dynamics of Machinery , 1963 .

[62]  Ferdinand Freudenstein,et al.  An Experimental and Analytical Investigation of the Dynamic Response of a High-Speed Cam-Follower System. Part 2: A Combined, Lumped/Distributed Parameter Dynamic Model , 1983 .

[63]  Binh Pham,et al.  Offset curves and surfaces: a brief survey , 1992, Comput. Aided Des..

[64]  Joseph Edward Shigley,et al.  Standard Handbook of Machine Design , 2004 .

[65]  R. H. MACMILLAN.  Kinematics of Mechanisms , 1954, Nature.

[66]  B. Bhushan.  Handbook of micro/nano tribology , 1995 .

[67]  Gerald Farin,et al.  Curves and surfaces for computer aided geometric design , 1990 .

[68]  X. Ren,et al.  Mathematics , 1935, Nature.

[69]  Ferdinand Freudenstein,et al.  The Development of a Predictive Model for the Optimization of High-Speed Cam-Follower Systems with Coulomb Damping Internal Friction and Elastic and Fluidic Elements , 1986 .

[70]  Robert D. Russell,et al.  Collocation for systems of boundary value problems , 1974 .

[71]  G. T. Rooney,et al.  Coulomb friction in mechanism sliding joints , 1982 .

[72]  Takashi Kosugi,et al.  Valve Motion Simulation Method for High-Speed Internal Combustion Engines , 1985 .

[73]  Jorge Angeles,et al.  Optimization of cam mechanisms , 1991 .

[74]  Arthur G. Erdman,et al.  Modern kinematics : developments in the last forty years , 1993 .

[75]  I. J. Schoenberg,et al.  On Pólya frequency functions IV: The fundamental spline functions and their limits , 1966 .

[76]  Philip Barkan.  Calculation of High -Speed Valve Motion with a Flexible Overhead Linkage , 1953 .

[77]  H. Kwakernaak,et al.  Minimum Vibration Cam Profiles , 1968 .

[78]  Winston M. Dudley.  New Methods in VALVE CAM DESIGN , 1948 .

[79]  Jorge Angeles,et al.  Optimal synthesis of cam mechanisms with oscillating flat-face followers , 1988 .

[80]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[81]  手島 通,et al.  Advanced control system , 1984 .

[82]  Jorge Angeles,et al.  Synthesis of plane curves with prescribed local geometric properties using periodic splines , 1983 .

[83]  A. Stroud,et al.  Gaussian quadrature formulas , 1966 .

[84]  P M Ku.  Interdisciplinary approach to friction and wear: proceedings of a NASA-sponsored symposium held November 28-30, in San Antonio, Texas , 1968 .

[85]  Ching-Yao Chan,et al.  Dynamic Model of a Fluctuating Rocker-Arm Ratio Cam System , 1987 .

[86]  H. O. Fuchs,et al.  Metal fatigue in engineering , 2001 .

[87]  N. S. Eiss,et al.  Vibration of Cams Having Two Degrees of Freedom , 1964 .

[88]  Philip Barkan,et al.  A Spring-Actuated, Cam-Follower System: Design Theory and Experimental Results , 1965 .

[89]  S M Barnes,et al.  Computer-Aided Kinematic Design of a Torsional Ratcheting Actuator , 2001 .

[90]  John H. Bickford,et al.  Mechanisms for intermittent motion , 1972 .

[91]  L. Shampine,et al.  A collocation method for boundary value problems , 1972 .

[92]  M. P. Koster,et al.  Vibrations of Cam Mechanisms , 1974 .

[93]  R. G. Herbert,et al.  Shape and Frequency Composition of Pulses From an Impact Pair , 1977 .

[94]  H. R. Kim.  Stochastic error analysis in cam mechanisms , 1978 .

[95]  Richard Weiss,et al.  The application of implicit Runge-Kutta and collection methods to boundary-value problems , 1974 .

[96]  F. Y. Chen.  Assessment of the Dynamic Quality of a Class of Dwell-Rise-Dwell Cams , 1981 .

[97]  K. R. Butterfield.  The Computation of all the Derivatives of a B-spline Basis , 1976 .

[98]  G. K. Ananthasuresh.  Design of fully rotatable, roller-crank-driven, cam mechanisms for arbitrary motion specifications , 2001 .

[99]  J. L. Wiederrich,et al.  Development of Cam Profiles Using the Convolution Operator , 1983 .

[100]  Erwin V. Zaretsky,et al.  Tribology for Aerospace Applications , 1997 .