Design of progressively folding thin-walled tubular components using compliant mechanism synthesis

Abstract This work introduces a design method for the progressive collapse of thin-walled tubular components under axial and oblique impacts. The proposed design method follows the principles of topometry optimization for compliant mechanism design in which the output port location and direction determine the folding (collapse) mode. In this work, the output ports are located near the impact end with a direction that is perpendicular to the component's longitudinal axis. The topometry optimization is achieved with the use of hybrid cellular automata for thin-wall structures. The result is a complex enforced buckle zone design that acts as a triggering mechanism to (a) initiate a specific collapse mode from the impact end, (b) stabilize the collapse process, and (c) reduce the peak force. The enforced buckle zone in the end portion of the tube also helps to avoid or delay the onset of global bending during an oblique impact with load angles higher than a critical value, which otherwise adversely affects the structure's capacity for load-carrying and energy absorption. The proposed design method has the potential to dramatically improve thin-walled component crashworthiness.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  C. L. Magee,et al.  The Interplay of Geometric and Materials Variables in Energy Absorption , 1977 .

[3]  Zhong You,et al.  Energy absorption of axially compressed thin-walled square tubes with patterns , 2007 .

[4]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[5]  Magnus Langseth,et al.  Modelling of tubes subjected to axial crushing , 2010 .

[6]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[7]  M. Langseth,et al.  Axial crushing of thin-walled high-strength steel sections , 2006 .

[8]  Masoud Rais-Rohani,et al.  Analysis and Optimization of Externally Stiffened Crush Tubes , 2010 .

[9]  Masoud Rais-Rohani,et al.  Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes , 2011 .

[10]  Yucheng Liu,et al.  Crashworthiness design of multi-corner thin-walled columns , 2008 .

[11]  M. Bendsøe,et al.  Topology Optimization: "Theory, Methods, And Applications" , 2011 .

[12]  Norman Jones,et al.  Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels , 2003 .

[13]  Odd Sture Hopperstad,et al.  Crash behaviour of thin-walled aluminium members , 1998 .

[15]  G. Noakes,et al.  College Physics , 1945, Nature.

[16]  John E. Renaud,et al.  Topology Optimization Using a Hybrid Cellular Automaton Method With Local Control Rules , 2006 .

[17]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[18]  S. Park,et al.  Collapse behavior of square thin-walled columns subjected to oblique loads , 1999 .

[19]  G. Nurick,et al.  The Energy-Absorbing Characteristics of Tubular Structures With Geometric and Material Modifications: An Overview , 2008 .

[20]  W. Abramowicz.  The effective crushing distance in axially compressed thin-walled metal columns , 1983 .

[21]  Andres Tovar,et al.  Topology optimization for minimum compliance using a control strategy , 2013 .

[22]  G. K. Ananthasuresh,et al.  On an optimal property of compliant topologies , 2000 .

[23]  A. Pugsley.  THE LARGE-SCALE CRUMPLING OF THIN CYLINDRICAL COLUMNS , 1960 .

[24]  Nader G. Zamani,et al.  A numerical study on the quasi-static axial crush characteristics of square aluminum tubes with chamfering and other triggering mechanisms , 2005 .

[25]  Klaus-Jürgen Bathe,et al.  Crushing and crashing of tubes with implicit time integration , 2012 .

[26]  Jae-Eung Oh,et al.  EFFECT OF TRIGGERING ON THE ENERGY ABSORPTION CAPACITY OF AXIALLY COMPRESSED ALUMINUM TUBES , 1999 .

[27]  O. Hopperstad,et al.  Crashworthiness of aluminum extrusions subjected to oblique loading: experiments and numerical analyses , 2002 .

[28]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[29]  James P. Schmiedeler,et al.  Design of Crashworthy Structures With Controlled Energy Absorption in the Hybrid Cellular Automaton Framework , 2013 .

[30]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[31]  Norman Jones,et al.  Dynamic axial crushing of circular tubes , 1984 .