Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects

Abstract A comprehensive and integrated review of thermal barrier coatings (TBCs) applied to turbine components is provided. Materials systems, processes, applications, durability issues, technical approaches and progress for improved TBC, and our understanding of the science and technology are discussed. Thermal barrier coating prime reliance and further advances have been hampered by TBC loss by particle impact and erosion in certain locations of the turbine blades. Accumulation of low melting eutectic containing calcia, magnesia, alumina and silica resulting in TBC spallation limits maximum surface temperature. Design methodologies to address durability and data scatter issues are discussed. Compositions, morphology, characteristics and performance data for new bonds to achieve longer TBC life are described. Further reduction in the thermal conductivity of the top layer to minimise the parasitic mass of the coating on the component is being sought via top layer composition and processing modifications as well as by alternate ceramic compositions. The progress in these areas is critically reviewed including processing, stability and durability limitations. The paper also describes effort to understand various failure mechanisms including modelling and simulation.

[1]  Alban Azzopardi,et al.  Thermal diffusivity and conductivity of Zr1−xYxO2−x/2 (x=0, 0.084 and 0.179) single crystals , 2004 .

[2]  Ann Bolcavage,et al.  Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A Review , 2008 .

[3]  U. Schulz,et al.  Developments in Processing of Ceramic Top Coats of EB-PVD Thermal Barrier Coatings , 2007 .

[4]  J. Smeggil,et al.  A relationship between indigenous impurity elements and protective oxide scale adherence characteristics , 1986 .

[5]  P. Hou.  Segregation Phenomena at Thermally Grown Al 2 O 3 /Alloy Interfaces , 2008 .

[6]  D. Young,et al.  α-NiPt(Al) and phase equilibria in the Ni–Al–Pt system at 1150 °C , 2005 .

[7]  J. Nicholls,et al.  A review of the erosion of thermal barrier coatings , 2007 .

[8]  D. Clarke,et al.  On the initiation of cyclic oxidation-induced rumpling of platinum-modified nickel aluminide coatings , 2009 .

[9]  P. Hou,et al.  Chemical and Morphological Evolution of a (NiPt)Al Bondcoat , 2006 .

[10]  P. Wright,et al.  Influence of cyclic strain on life of a PVD TBC , 1998 .

[11]  H. Wadley,et al.  Electron beam directed vapor deposition of thermal barrier coatings , 1998 .

[12]  J. Yang,et al.  Infiltration‐Inhibiting Reaction of Gadolinium Zirconate Thermal Barrier Coatings with CMAS Melts , 2008 .

[13]  J. Hutchinson,et al.  Lifetime Assessment for Thermal Barrier Coatings: Tests for Measuring Mixed Mode Delamination Toughness , 2011 .

[14]  A. Evans,et al.  The mechanics of coating delamination in thermal gradients , 2007 .

[15]  A. Vaidya,et al.  Sensing, Control, and In Situ Measurement of Coating Properties: An Integrated Approach Toward Establishing Process-Property Correlations , 2009 .

[16]  A. Evans,et al.  A numerical assessment of the durability of thermal barrier systems that fail by ratcheting of the thermally grown oxide , 2003 .

[17]  John R. Nicholls,et al.  Advances in Coating Design for High-Performance Gas Turbines , 2003 .

[18]  Kevin Barraclough,et al.  I and i , 2001, BMJ : British Medical Journal.

[19]  Stephan Stecura,et al.  New ZrO2Yb2O3 plasma-sprayed coatings for thermal barrier applications , 1987 .

[20]  Julie M. Drexler,et al.  Air-plasma-sprayed thermal barrier coatings that are resistant to high-temperature attack by glassy deposits , 2010 .

[21]  Brian Gleeson,et al.  Thermal Barrier Coatings for Aeroengine Applications , 2006 .

[22]  Baki M. Cetegen,et al.  Mechanisms of ceramic coating deposition in solution-precursor plasma spray , 2002 .

[23]  J. Lin,et al.  Comparison of the tribological characteristics of titanium nitride and titanium carbonitride coating films , 1996 .

[24]  Arthur H. Heuer,et al.  Science and Technology of Zirconia , 1981 .

[25]  A. Evans,et al.  On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime (t′) yttria-stabilized zirconia , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[26]  C. Levi.  Emerging materials and processes for thermal barrier systems , 2004 .

[27]  M. Rühle,et al.  Thermochemical compatibility between alumina and ZrO2–GdO3/2 thermal barrier coatings , 2005 .

[28]  T. Schaedler,et al.  Phase equilibria in the TiO2-YO1.5-ZrO2 system , 2008 .

[29]  D. Clarke,et al.  The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating , 2001 .

[30]  A. Evans,et al.  The stresses and distortions caused by formation of a thermally grown alumina: comparison between measurements and simulations , 2004 .

[31]  F. Pettit,et al.  Failure characteristics during cyclic oxidation of yttria stabilized zirconia thermal barrier coatings deposited via electron beam physical vapor deposition on platinum aluminide and on NiCoCrAlY bond coats with processing modifications for improved performances , 2006 .

[32]  B. Baufeld,et al.  Ferroelastic and plastic deformation of t '-zirconia single crystals , 2004 .

[33]  Haydn N. G. Wadley,et al.  Low thermal conductivity vapor deposited zirconia microstructures , 2001 .

[34]  B. Gleeson,et al.  Interdiffusion behavior of Pt-modified γ-Ni + γ′-Ni3Al alloys coupled to Ni-Al-based alloys , 2005 .

[35]  R. Stephenson.  A and V , 1962, The British journal of ophthalmology.

[36]  Xiao-Chuan Wang,et al.  Low‐Temperature Sintering and Electrical Properties of ZnO–Bi2O3–TiO2–Co2O3–MnCO3‐Based Varistor with Bi2O3–B2O3 Frit for Multilayer Chip Varistor Applications , 2010 .

[37]  C. Leyens,et al.  Review on Advanced EB‐PVD Ceramic Topcoats for TBC Applications , 2005 .

[38]  J. Cairney,et al.  Phase stability of thermal barrier oxides: A comparative study of Y and Yb additions , 2007 .

[39]  J. Nicholls,et al.  Erosion of gadolinia doped EB-PVD TBCs , 2006 .

[40]  Christoph Leyens,et al.  Some recent trends in research and technology of advanced thermal barrier coatings , 2003 .

[41]  J. Nicholls,et al.  Effect of microstructure and temperature on the erosion rates and mechanisms of modified EB PVD TBCs , 2009 .

[42]  A. Heuer,et al.  Transient Oxidation of a γ-Ni–28Cr–11Al Alloy , 2010 .

[43]  M. Gell,et al.  Thermal conductivity of thermal barrier coatings , 1998 .

[44]  Joshua R. Smith,et al.  First principles assessment of metal/oxide interface adhesion , 2008 .

[45]  S. Beecher,et al.  The effect of thermal aging on the thermal conductivity of plasma sprayed and EB-PVD thermal barrier coatings , 1996 .

[46]  Jogender Singh,et al.  Delamination‐Indicating Thermal Barrier Coatings Using YSZ:Eu Sublayers , 2006 .

[47]  Jogender Singh,et al.  Tailored microstructure of zirconia and hafnia-based thermal barrier coatings with low thermal conductivity and high hemispherical reflectance by EB-PVD , 2004 .

[48]  David R. Clarke,et al.  Doped Oxides for High-Temperature Luminescence and Lifetime Thermometry , 2009 .

[49]  E. Jordan,et al.  Highly durable thermal barrier coatings made by the solution precursor plasma spray process , 2004 .

[50]  U. Schulz,et al.  Microstructure and texture of EB-PVD TBCs grown under different rotation modes , 2003 .

[51]  C. Leyens,et al.  EB-PVD thermal barrier coatings for aeroengines and gas turbines , 2001 .

[52]  A. Evans,et al.  In Situ Measurement of the Toughness of the Interface Between a Thermal Barrier Coating and a Ni Alloy , 2011 .

[53]  K. Fritscher,et al.  EB-PVD processing of pyrochlore-structured La2Zr2O7-based TBCs , 2004 .

[54]  W. Marsden.  I and J , 2012 .

[55]  Xiao-gang Wang,et al.  Phase diagram for the Ni/Al$_{2}$O$_{3}$ interface and relationships to adhesion , 2006 .

[56]  F. Aldinger,et al.  Assessment of thermodynamic parameters in the system ZrO2–Y2O3–Al2O3 , 2004 .

[57]  말로니마이클제이.  Thermal barrier coating systems and materials , 1999 .

[58]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[59]  W. Lee,et al.  Thermal Barrier Coating Workshop , 1995 .

[60]  I. Wright,et al.  Effect of Quaternary Additions on the Oxidation Behavior of Hf-Doped NiAl , 2003 .

[61]  J. Hutchinson,et al.  Undulation instability of a compressed elastic film on a nonlinear creeping substrate , 2003 .

[62]  A. Evans,et al.  Mechanisms of cracking and delamination within thick thermal barrier systems in aero-engines subject to calcium-magnesium-alumino-silicate (CMAS) penetration , 2008 .

[63]  D. Clarke,et al.  Effect of superimposed uniaxial stress on rumpling of platinum-modified nickel aluminide coatings , 2009 .

[64]  A. Evans,et al.  A probe for the high temperature deformation of thermal barrier oxides , 2004 .

[65]  A. Heuer,et al.  Alumina Scale Formation: A New Perspective , 2011 .

[66]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[67]  D. V. Rigney,et al.  PVD thermal barrier coating applications and process development for aircraft engines , 1997 .

[68]  J. Smialek.  Effect of sulfur removal on Al2O3 scale adhesion , 1991 .

[69]  Carlos G. Levi,et al.  MATERIALS DESIGN FOR THE NEXT GENERATION THERMAL BARRIER COATINGS , 2003 .

[70]  Sukhvinder P.S. Badwal,et al.  Science and Technology of Zirconia V , 1993 .

[71]  L. Peluso,et al.  Role of environment deposits and operating surface temperature in spallation of air plasma sprayed thermal barrier coatings , 1996 .

[72]  N. Dahotre,et al.  Elevated Temperature Coatings: Science and Technology IV , 2001 .

[73]  Baki M. Cetegen,et al.  Towards durable thermal barrier coatings with novel microstructures deposited by solution-precursor plasma spray , 2001 .

[74]  Andrew G. Glen,et al.  APPL , 2001 .

[75]  Woo Y. Lee,et al.  Substrate and bond coat compositions: factors affecting alumina scale adhesion , 1998 .

[76]  A. Virkar.  Role of Ferroelasticity in Toughening of Zirconia Ceramics , 1998 .

[77]  David R. Clarke,et al.  Materials selection guidelines for low thermal conductivity thermal barrier coatings , 2003 .

[78]  R. A. Miller.  Progress Toward Life Modeling of Thermal Barrier Coatings for Aircraft Gas Turbine Engines , 1987 .

[79]  A. G. Evans,et al.  Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings , 2000 .

[80]  T. Kameda,et al.  EB-PVD process and thermal properties of hafnia-based thermal barrier coating , 2003 .

[81]  N. Fleck,et al.  Elastodynamic Erosion of Thermal Barrier Coatings , 2011 .

[82]  F. Pettit,et al.  The influence of platinum on the failure of EBPVD YSZ TBCs on NiCoCrAlY bond coats , 2002 .

[83]  I. Wright,et al.  Influence of Sulfur, Platinum, and Hafnium on the Oxidation Behavior of CVD NiAl Bond Coatings , 2002 .

[84]  David R. Clarke,et al.  The effect of oxidation pre-treatment on the cyclic life of EB-PVD thermal barrier coatings with platinum-aluminide bond coats , 2005 .

[85]  J. Nicholls,et al.  Erosion, corrosion and erosion–corrosion of EB PVD thermal barrier coatings , 2008 .

[86]  P Wright,et al.  Mechanisms governing the performance of thermal barrier coatings , 1999 .

[87]  K. Lawson,et al.  Methods to reduce the thermal conductivity of EB-PVD TBCs , 2002 .

[88]  E. Jordan,et al.  Thermal Barrier Coatings for Gas-Turbine Engine Applications , 2002, Science.

[89]  A. Evans,et al.  Influence of sulfur on the adhesion of the nickel/alumina interface , 2003 .

[90]  David R. Clarke,et al.  Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation , 2000 .

[91]  Anil V. Virkar,et al.  Ferroelastic Domain Switching as a Toughening Mechanism in Tetragonal Zirconia , 1986 .

[92]  S. Fuchs.  Thermal Barrier Coatings , 2013 .

[93]  A. Evans,et al.  Mechanisms governing the distortion of alumina-forming alloys upon cyclic oxidation , 2003 .

[94]  Robert Vassen,et al.  Zirconates as New Materials for Thermal Barrier Coatings , 2004 .

[95]  K. Schlichting.  Failure modes of plasma-sprayed thermal barrier coatings , 2003 .

[96]  Robert A. Miller,et al.  Oxidation‐Based Model for Thermal Barrier Coating Life , 1984 .

[97]  D. Clarke,et al.  Evolution of thermal properties of EB-PVD 7YSZ thermal barrier coatings with thermal cycling , 2009 .

[98]  N. S. Cheruvu,et al.  Evaluation, degradation and life assessment of coatings for land based combustion turbines , 2006 .

[99]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[100]  A. Evans,et al.  Foreign object damage in a thermal barrier system: Mechanisms and simulations , 2003 .

[101]  I. Wright,et al.  Alloy design strategies for promoting protective oxide-scale formation , 2000 .

[102]  A. Evans,et al.  Toughening of Nontransformable t′‐YSZ by Addition of Titania , 2007 .

[103]  U. Schulz,et al.  Low thermal conductivity ceramics for turbine blade thermal barrier coating application , 2008 .

[104]  B. Pint.  The Future of Alumina-Forming Alloys: Challenges and Applications for Power Generation , 2011 .

[105]  T. A. Cruse,et al.  Thermal Barrier Coating Life Prediction Model Development , 1988 .

[106]  David R. Clarke,et al.  Damage Evolution in Thermal Barrier Coatings with Thermal Cycling , 2011 .

[107]  P. Hou,et al.  Interfacial Segregation, Pore Formation, and Scale Adhesion on NiAl Alloys , 2001 .

[108]  J. Yang,et al.  Thermochemical Interaction of Thermal Barrier Coatings with Molten CaO–MgO–Al2O3–SiO2 (CMAS) Deposits , 2006 .

[109]  Rainer Gadow,et al.  Review of New Developments in Suspension and Solution Precursor Thermal Spray Processes , 2011 .

[110]  T. Narita,et al.  Development of Re‐based diffusion barrier coatings on nickel based superalloys , 2005 .

[111]  Carlos G. Levi,et al.  The influence of oxides on the performance of advanced gas turbines , 2008 .

[112]  A. Evans,et al.  On the delamination of thermal barrier coatings in a thermal gradient , 2002 .

[113]  D. Clarke,et al.  Microstructural study of the theta-alpha transformation in alumina scales formed on nickel-aluminides , 2000 .

[114]  R. W. Jackson,et al.  Development of Intermixed Zones of Alumina/Zirconia in Thermal Barrier Coating Systems , 2007 .

[115]  Dongming Zhu,et al.  Thermal conductivity and elastic modulus evolution of thermal barrier coatings under high heat flux conditions , 2000 .

[116]  David R. Clarke,et al.  The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends , 2009 .

[117]  P. Marcus,et al.  Effect of Platinum on the Growth Rate of the Oxide Scale Formed on Cast Nickel Aluminide Intermetallic Alloys , 2005 .

[118]  D. Clarke,et al.  Luminescence sensing of temperatures in thermal barrier coatings , 2007 .

[119]  K. Stiller,et al.  Influence of aging on structure and thermal conductivity of Y-PSZ and Y-FSZ EB-PVD coatings , 2003 .

[120]  D. Clarke,et al.  Cyclic oxidation-induced cracking of platinum-modified nickel-aluminide coatings , 2009 .

[121]  S. Sampath.  Thermal sprayed ceramic coatings: fundamental issues and application considerations , 2009 .

[122]  J. Smialek.  Maintaining adhesion of protective Al2O3 scales , 2000 .

[123]  R. Bruce.  Development of 1232°C (2250°F) erosion and impact tests for thermal barrier coatings , 1998 .

[124]  J. Nicholls,et al.  The effect of TBC morphology on the erosion rate of EB-PVD TBCs , 2005 .

[125]  Dongming Zhu,et al.  Sintering and Creep Behavior of Plasma-Sprayed Zirconia and Hafnia Based Thermal Barrier Coatings , 1998 .

[126]  David R. Clarke,et al.  Anisotropic Thermal Diffusivity and Conductivity of La‐Doped Strontium Niobate Sr2Nb2O7 , 2010 .

[127]  A. Evans,et al.  A delamination mechanism for thermal barrier coatings subject to calcium-magnesium-alumino-silicate (CMAS) infiltration , 2005 .

[128]  Dae‐Joon Kim,et al.  Effect of Ta 2 O 5 , Nb 2 O 5 , and HfO 2 Alloying on the Transformability of Y 2 O 3 -Stabilized Tetragonal ZrO 2 , 1990 .

[129]  J. Nicholls,et al.  The effect of TBC morphology and aging on the erosion rate of EB-PVD TBCs , 2005 .

[130]  N. Fleck,et al.  Scaling laws governing the erosion and impact resistance of thermal barrier coatings , 2006 .

[131]  T. Tien,et al.  Phase stability and physical properties of cubic and tetragonal ZrO2 in the system ZrO2-Y2O3-Ta2O5 , 1991 .

[132]  Dongming Zhu,et al.  Thermal Conductivity and Sintering Behavior of Advanced Thermal Barrier Coatings , 2002 .

[133]  J. Hutchinson,et al.  An analytical model of rumpling in thermal barrier coatings , 2005 .

[134]  Xinqing Ma,et al.  Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits , 2007 .