Fully printable perovskite solar cells with highly-conductive, low-temperature, perovskite-compatible carbon electrode

Abstract We obtain a novel kind of highly-conductive, low-temperature and perovskite-compatible carbon paste treated with the functional additives of titanium (IV) isopropoxide and acetic acid. The functional additives in the carbon paste can in si-tu generate newly complex polymeric Ti-O-Ti species acting as binder and plasticizer. It helps the electrical conductivity of carbon film increase to 1.13 × 104 S m−1, which corresponds to a sheet resistance of 4 Ω □−1 for a typical 20 μm film, superior to the transparent FTO/ITO electrode (15 Ω □−1). Then the carbon film is applied as the low-temperature carbon electrode into fully printable mesoscopic perovskite solar cells and a champion efficiency of 14.04% is achieved. Meanwhile, the series resistance of device based on low-temperature carbon electrode can be reduced from 21 to 13 Ω cm2, compared to device based on high temperature carbon electrode only. This low-temperature, low cost, highly-conductive carbon film shows promising application in the future module design of fully printable mesoscopic perovskite solar cells.

[1]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .

[2]  Qi Chen,et al.  Planar heterojunction perovskite solar cells via vapor-assisted solution process. , 2014, Journal of the American Chemical Society.

[3]  Huawei Zhou,et al.  Low-Temperature Processed and Carbon-Based ZnO/CH3NH3PbI3/C Planar Heterojunction Perovskite Solar Cells , 2015 .

[4]  Qi Chen,et al.  Perovskite solar cells: film formation and properties , 2015 .

[5]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[6]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[7]  Yaoguang Rong,et al.  Full Printable Processed Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells with Carbon Counter Electrode , 2013, Scientific Reports.

[8]  Wei Zhang,et al.  Formation of thin films of organic-inorganic perovskites for high-efficiency solar cells. , 2015, Angewandte Chemie.

[9]  U. Posset,et al.  FT-IR spectroscopic investigations on sol–gel-derived coatings from acid-modified titanium alkoxides , 2000 .

[10]  S. Zakeeruddin,et al.  A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells , 2016, Science.

[11]  Yaoguang Rong,et al.  Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells , 2015 .

[12]  A. Hollenkamp,et al.  Carbon properties and their role in supercapacitors , 2006 .

[13]  D. Birnie.  Esterification kinetics in titanium isopropoxide-acetic acid solutions , 2000 .

[14]  M. Grätzel,et al.  A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability , 2014, Science.

[15]  Bofei Xue,et al.  A multilayered approach to polyfluorene water-based organic photovoltaics , 2012 .

[16]  James R. Durrant,et al.  Electron Injection Efficiency and Diffusion Length in Dye-Sensitized Solar Cells Derived from Incident Photon Conversion Efficiency Measurements , 2009 .

[17]  Jennifer L Baker,et al.  A novel dimethylformamide (DMF) free bar-cast method to deposit organolead perovskite thin films with improved stability. , 2016, Chemical communications.

[18]  Sandeep Kumar Pathak,et al.  Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells , 2015, Nature Communications.

[19]  Yanhong Luo,et al.  Free-standing flexible carbon electrode for highly efficient hole-conductor-free perovskite solar cells , 2015 .

[20]  Anders Hagfeldt,et al.  Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells. , 2016, ACS nano.

[21]  Yue Hu,et al.  Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells , 2017, Nature Communications.

[22]  P. Wallace.  The Band Theory of Graphite , 1947 .

[23]  Henry J Snaith,et al.  Metal-halide perovskites for photovoltaic and light-emitting devices. , 2015, Nature nanotechnology.

[24]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.

[25]  M. Ikegami,et al.  Highly Luminescent Lead Bromide Perovskite Nanoparticles Synthesized with Porous Alumina Media , 2012 .

[26]  L. Palmisano,et al.  Pyrolysis study of sol-gel derived TiO2 powders: Part IV. TiO2-anatase prepared by hydrolysing titanium(IV) isopropoxide without chelating agents , 2004 .

[27]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[28]  Huawei Zhou,et al.  Hole-Conductor-Free, Metal-Electrode-Free TiO2/CH3NH3PbI3 Heterojunction Solar Cells Based on a Low-Temperature Carbon Electrode. , 2014, The journal of physical chemistry letters.

[29]  Aslihan Babayigit,et al.  Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite , 2015 .

[30]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[31]  M. Grätzel,et al.  Thermal Behavior of Methylammonium Lead- trihalide Perovskite Photovoltaic Light Harvesters , 2014 .

[32]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[33]  Colin M. MacRae,et al.  A design for monolithic all-solid-state dye-sensitized solar cells with a platinized carbon counterelectrode , 2009 .

[34]  Timothy W. Jones,et al.  Efficient All-Printable Solid-State Dye-Sensitized Solar Cell Based on a Low-Resistivity Carbon Composite Counter Electrode and Highly Doped Hole Transport Material , 2015 .

[35]  Yanhong Luo,et al.  An all-carbon counter electrode for highly efficient hole-conductor-free organo-metal perovskite solar cells , 2014 .