Review of silver nanoparticle based die attach materials for high power/temperature applications
暂无分享,去创建一个
[1] J. D. van Wyk,et al. High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment , 2007, IEEE Transactions on Advanced Packaging.
[2] Yohan Noh,et al. Thermally stable high temperature die attach solution , 2016 .
[3] K. Ngo,et al. Evaluation of Thermal Cycling Reliability of Sintered Nanosilver Versus Soldered Joints by Curvature Measurement , 2014, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[4] G. Lu,et al. Die bonding of single emitter semiconductor laser with nano-scale silver paste , 2011, 2011 12th International Conference on Electronic Packaging Technology and High Density Packaging.
[5] Mark Johnson,et al. Die Attach of Power Devices Using Silver Sintering - Bonding Process Optimization and Characterization , 2011 .
[6] Kuan Yew Cheong,et al. Die Attach Materials for High Temperature Applications: A Review , 2011, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[7] Y. T. Lin,et al. Identifying the Development State of Sintered Silver (Ag) as a Bonding Material in the Microelectronic Packaging Via a Patent Landscape Study , 2016 .
[8] Xu Chen,et al. Simplification of Low-Temperature Sintering Nanosilver for Power Electronics Packaging , 2013, Journal of Electronic Materials.
[9] S. Sakamoto,et al. Thermo mechanical Reliability of Low-temperature Low-pressure Die Bonding Using Thin Ag Flake Pastes , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).
[10] Cao Yang,et al. Large-Scale synthesis of silver nanoparticles by aqueous reduction for low-temperature sintering bonding , 2014 .
[11] G. Lu,et al. Effect of Silver Flakes in Silver Paste on the Joining Process and Properties of Sandwich Power Modules (IGBTs Chip/Silver Paste/Bare Cu) , 2016, Journal of Electronic Materials.
[12] Tao Wang,et al. Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection , 2007 .
[13] G. Lu,et al. Pressureless sintering of nanosilver paste at low temperature to join large area (≥100mm2) power chips for electronic packaging , 2014 .
[14] Xu Chen,et al. Three-Dimensional Visualization of the Crack-Growth Behavior of Nano-Silver Joints During Shear Creep , 2015, Journal of Electronic Materials.
[15] Chunqing Wang,et al. Rapid pressureless low-temperature sintering of Ag nanoparticles for high-power density electronic packaging , 2013 .
[16] Kojiro F. Kobayashi,et al. Metal-metal bonding process using Ag metallo-organic nanoparticles , 2005 .
[17] Xu Chen,et al. Characterizations of Nanosilver Joints by Rapid Sintering at Low Temperature for Power Electronic Packaging , 2014, IEEE Transactions on Device and Materials Reliability.
[18] S. Sakamoto,et al. Low temperature die-bonding with Ag flakes , 2011, 18th European Microelectronics & Packaging Conference.
[19] A. Wu,et al. Sintering bonding process with Ag nanoparticle paste and joint properties in high temperature environment , 2016 .
[20] G. Quilliec,et al. Quantitative Analysis of Porosity and Transport Properties by FIB-SEM 3D Imaging of a Solder Based Sintered Silver for a New Microelectronic Component , 2016, Journal of Electronic Materials.
[21] Xu Chen,et al. Effect of joint sizes of low-temperature sintered nano-silver on thermal residual curvature of sandwiched assembly , 2012 .
[22] R. Durairaj,et al. Pressure free sintering of silver nanoparticles to silver substrate using weakly binding ligands , 2012, 2012 12th IEEE International Conference on Nanotechnology (IEEE-NANO).
[23] J. Felba,et al. Nano sized silver for electronic packaging , 2013, 2013 13th IEEE International Conference on Nanotechnology (IEEE-NANO 2013).
[24] G. Lu,et al. Control of nanosilver sintering attained through organic binder burnout , 2007 .
[25] Y. Mei,et al. Reliability of pressureless sintered nanosilver for attaching IGBT devices , 2016, 2016 International Conference on Electronics Packaging (ICEP).
[26] G. Lu,et al. Novel interface material used in high power electronic die-attaching on bare Cu substrates , 2016, Journal of Materials Science: Materials in Electronics.
[27] Ali Mansourian,et al. Microstructural evolution of sintered silver at elevated temperatures , 2016, Microelectron. Reliab..
[28] G. Lu,et al. High-Temperature Creep Behavior of Low-Temperature-Sintered Nano-Silver Paste Films , 2012, Journal of Electronic Materials.
[29] Yoshiaki Morisada,et al. A Low-Temperature Pressureless Bonding Process Using a Trimodal Mixture System of Ag Nanoparticles , 2011 .
[30] Khai Ngo,et al. Low-pressure (< 5 MPa) Low-temperature Joining of Large-area Chips on Copper Using Nanosilver Paste , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).
[31] Xu Chen,et al. Ratcheting behavior of sandwiched assembly joined by sintered nanosilver for power electronics packaging , 2013, Microelectron. Reliab..
[32] Samjid H. Mannan,et al. Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates , 2014 .
[33] Khai D. T. Ngo,et al. Temperature Cycling Reliability Assessment of Die Attachment on Bare Copper by Pressureless Nanosilver Sintering , 2015, IEEE Transactions on Device and Materials Reliability.
[34] Takuto Yamaguchi,et al. Interfacial Bonding Mechanism Using Silver Metallo-Organic Nanoparticles to Bulk Metals and Observation of Sintering Behavior , 2008 .
[35] Bruno Allard,et al. State of the art of high temperature power electronics , 2009 .
[36] L. Mendizabal,et al. Survey of High-Temperature Reliability of Power Electronics Packaging Components , 2015, IEEE Transactions on Power Electronics.
[37] Xin Li,et al. Reliability comparison between SAC305 joint and sintered nanosilver joint at high temperatures for power electronic packaging , 2014 .
[38] Khai D. T. Ngo,et al. Simplification of the Nanosilver Sintering Process for Large-Area Semiconductor Chip Bonding: Reduction of Hot-Pressing Temperature Below 200/spl deg/C , 2013, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[39] A. Bakin,et al. SiC-Die-Attachment for High Temperature Applications , 2010 .
[40] Michael Edwards,et al. The shear strength of nano-Ag sintered joints and the use of Ag interconnects in the design and manufacture of SiGe-based thermo-electric modules , 2014, Microelectron. Reliab..
[41] S. T. Chua,et al. Microstructural studies and bonding strength of pressureless sintered nano-silver joints on silver, direct bond copper (DBC) and copper substrates aged at 300 °C , 2016 .
[42] S. Isoda,et al. Silver nanosintering: a lead-free alternative to soldering , 2008 .
[43] B. Mcpherson,et al. Advanced Materials for High Temperature, High Performance, Wide Bandgap Power Modules , 2015, Journal of Electronic Materials.
[45] K. S. Siow,et al. Mechanical properties of nano-silver joints as die attach materials , 2012 .
[46] Guo-Quan Lu,et al. Thermomechanical Reliability of Low-Temperature Sintered Silver Die Attached SiC Power Device Assembly , 2006, IEEE Transactions on Device and Materials Reliability.
[47] K. S. Siow,et al. Are Sintered Silver Joints Ready for Use as Interconnect Material in Microelectronic Packaging? , 2014, Journal of Electronic Materials.
[48] K. Suganuma,et al. Microstructural stability of Ag sinter joining in thermal cycling , 2013, Journal of Materials Science: Materials in Electronics.
[49] A. Mantooth,et al. Silicon-carbide (SiC) semiconductor power electronics for extreme high-temperature environments , 2004, 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720).
[50] Xu Chen,et al. Low-temperature and Pressureless Sintering Technology for High-performance and High-temperature Interconnection of Semiconductor Devices , 2007, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.
[51] G. Lu,et al. Evolution of curvature under thermal cycling in sandwich assembly bonded by sintered nanosilver paste , 2013 .
[52] Guo-Quan Lu,et al. Study on high temperature bonding reliability of sintered nano-silver joint on bare copper plate , 2015, Microelectron. Reliab..
[53] H. Morel,et al. High-temperature die-attaches for SiC power devices , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.
[54] M. Dimke,et al. Thermal performance and reliability assessment of nano-sintered silver die attach materials , 2015, 2015 31st Thermal Measurement, Modeling & Management Symposium (SEMI-THERM).
[55] G. Lu,et al. Characterization and Reliability of Sintered Nanosilver Joints by a Rapid Current-Assisted Method for Power Electronics Packaging , 2014, IEEE Transactions on Device and Materials Reliability.
[56] E. Woirgard,et al. Lifetime Evaluation of Nanoscale Silver Sintered Power Modules for Automotive Application Based on Experiments and Finite-Element Modeling , 2015, IEEE Transactions on Device and Materials Reliability.
[57] G. Lu,et al. Relationship between transient thermal impedance and shear strength of pressureless sintered silver as die attachment for power devices , 2015, 2015 International Conference on Electronic Packaging and iMAPS All Asia Conference (ICEP-IAAC).
[58] G. Lu,et al. Correlation between interfacial microstructure and bonding strength of sintered nanosilver on ENIG and electroplated Ni/Au direct-bond-copper (DBC) substrates , 2016 .
[59] Shear strength of copper joints prepared by low temperature sintering of silver nanoparticles , 2014, Electronic Materials Letters.
[60] G. Lu,et al. Low-Temperature Sintering of Nanoscale Silver Paste for Attaching Large-Area $({>}100~{\rm mm}^{2})$ Chips , 2010, IEEE Transactions on Components and Packaging Technologies.
[61] Anming Hu,et al. Reinforcement of Ag nanoparticle paste with nanowires for low temperature pressureless bonding , 2012, Journal of Materials Science.
[62] A. Waag,et al. Low-pressure sintering of silver micro- and nanoparticles for a high temperature stable pick & place die attach , 2011, 18th European Microelectronics & Packaging Conference.
[63] G. Lu,et al. Microstructure and Joint Properties of Nano-Silver Paste by Ultrasonic-Assisted Pressureless Sintering , 2016, Journal of Electronic Materials.
[64] Cyril Buttay,et al. Bonding strength of multiple SiC die attachment prepared by sintering of Ag nanoparticles , 2015 .
[65] G. Lu,et al. Creep properties of low-temperature sintered nano-silver lap shear joints , 2013 .
[66] K. Ngo,et al. Shrinkage and Sintering Behavior of a Low-Temperature Sinterable Nanosilver Die-Attach Paste , 2012, Journal of Electronic Materials.
[67] Wei Guo,et al. Low-Temperature sintering bonding using silver nanoparticle paste for electronics packaging , 2015 .
[68] G. Lu,et al. Interface evolution analysis of graded thermoelectric materials joined by low temperature sintering of nano-silver paste , 2016 .
[69] G. Zou,et al. Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications. , 2015, ACS applied materials & interfaces.
[70] Ole Martin Løvvik,et al. Effect of Temperature on the Die Shear Strength of a Au-Sn SLID Bond , 2013, Metallurgical and Materials Transactions A.