Design and Robustness Analysis of Discrete Observers for Diesel Engine In-Cylinder Oxygen Mass Fraction Cycle-by-Cycle Estimation

This paper presents three discrete observer designs for cycle-by-cycle estimation of the in-cylinder oxygen mass fraction at the intake valve closing (IVC) on diesel engines equipped with exhaust gas recirculation systems. These observers can provide critical in-cylinder condition oxygen fraction information that is useful for control of combustion, in particular advanced combustion modes on a cycle-by-cycle basis. The observers were designed based on Lyapunov analysis and linear matrix inequality techniques. By input-to-state stability analysis, robust properties of the three observers were revealed. Simulations using a high fidelity, computational, GT-Power engine model exhibited that the observers can effectively estimate the in-cylinder oxygen mass fraction at IVC on a cycle-by-cycle basis at both steady-state and transient operations. In addition, comparisons were made to evaluate the observers' robustness against measurement and parametric uncertainties/inaccuracies, such as volumetric efficiency uncertainty, exhaust pressure sensor uncertainty, and temperature sensor dynamics. Experimental results from a medium-duty diesel engine were provided to show the effectiveness of the observers and to validate the in-cylinder oxygen fraction estimation in an indirect and innovative way by utilizing the measured cylinder pressure signals.

[1]  Zhong-Ping Jiang,et al.  Input-to-state stability for discrete-time nonlinear systems , 1999 .

[2]  J. Daafouz,et al.  Parameter-dependent state observer design for affine LPV systems , 2001 .

[3]  J. Christian Gerdes,et al.  Modeling Cycle-to-Cycle Coupling in HCCI Engines Utilizing Variable Valve Actuation , 2004 .

[4]  D. Bernstein,et al.  Parameter-dependent Lyapunov functions and the Popov criterion in robust analysis and synthesis , 1995, IEEE Trans. Autom. Control..

[5]  Fengjun Yan,et al.  Enabling Air-Path Systems for Homogeneous Charge Compression Ignition (HCCI) Engine Transient Control , 2009 .

[6]  A. H. Glattfelder,et al.  Model-based control of the VGT and EGR in a turbocharged common-rail diesel engine: Theory and passenger car implementation , 2003 .

[7]  Anna G. Stefanopoulou,et al.  Stability Analysis in Homogeneous Charge Compression Ignition (HCCI) Engines With High Dilution , 2007, IEEE Transactions on Control Systems Technology.

[8]  Keith Glover,et al.  Calibratable linear parameter-varying control of a turbocharged diesel engine , 2006, IEEE Transactions on Control Systems Technology.

[9]  Zoran Filipi,et al.  Characterizing the thermal sensitivity of a gasoline homogeneous charge compression ignition engine with measurements of instantaneous wall temperature and heat flux , 2005 .

[10]  P. Seenikannan,et al.  A Design Strategy for Volumetric Efficiency Improvement in a Multi-cylinder Stationary Diesel Engine and its Validity under Transient Engine Operation , 2008 .

[11]  Gérard Bloch,et al.  Bounded state reconstruction error for LPV systems with estimated parameters , 2004 .

[12]  Fengjun Yan,et al.  Optimal Control of Complex Air-Path Systems for Advanced Diesel Engines , 2009 .

[13]  Rolf D. Reitz,et al.  Adaptive Injection Strategies (AIS) for Ultra-Low Emissions Diesel Engines , 2008 .

[14]  Junmin Wang,et al.  Hybrid Robust Air-Path Control for Diesel Engines Operating Conventional and Low Temperature Combustion Modes , 2008, IEEE Transactions on Control Systems Technology.

[15]  Jamal Daafouz,et al.  Parameter dependent Lyapunov functions for discrete time systems with time varying parametric uncertainties , 2001, Syst. Control. Lett..

[16]  Miroslav Krstic,et al.  A simple HCCI engine model for control , 2006, 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control.

[17]  Junmin Wang,et al.  Investigation of Alternative Combustion, Airflow-Dominant Control and Aftertreatment System for Clean Diesel Vehicles , 2007 .

[18]  Junmin Wang,et al.  On the Advanced Air-Path Control and Estimation for Multiple and Alternative Combustion Mode Engines , 2008 .

[19]  A. Stefanopoulou,et al.  A mean-value model for control of Homogeneous Charge Compression Ignition (HCCI) engines , 2005 .

[20]  M. Muthukrishnan,et al.  Thermocouple time constant measurement by cross power spectra , 1976 .

[21]  J. Karl Hedrick,et al.  Cylinder Air/Fuel Ratio Estimation Using Net Heat Release Data , 2001 .

[22]  Junmin Wang,et al.  Air fraction estimation for multiple combustion mode diesel engines with dual-loop EGR systems , 2007, 2007 46th IEEE Conference on Decision and Control.

[23]  Andrew L. Emtage,et al.  The Calculation of Heat Release Energy from Engine Cylinder Pressure Data , 1998 .

[24]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[25]  葛山裕史 Homogeneous charge compression ignition engine , 2007 .

[26]  P. Apkarian,et al.  Advanced gain-scheduling techniques for uncertain systems , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[27]  Mrdjan Jankovic,et al.  Nonlinear Observer-Based Control of Load Transitions in Homogeneous Charge Compression Ignition Engines , 2007, IEEE Transactions on Control Systems Technology.

[28]  Michael Bargende,et al.  A model for a fast prediction of the in-cylinder residual gas mass , 2004 .

[29]  Richard Stobart,et al.  Modeling and Control of Diesel Engines Equipped with a Two-Stage Turbo-System , 2008 .

[30]  Gregory M. Shaver,et al.  Modeling Cylinder-to-Cylinder Coupling in Multi-Cylinder HCCI Engines Incorporating Reinduction , 2007 .

[31]  Jamal Daafouz,et al.  Observer design with guaranteed bound for LPV systems , 2005 .

[32]  Junmin Wang Smooth In-Cylinder Lean-Rich Combustion Switching Control for Diesel Engine Exhaust-Treatment System Regenerations , 2008 .

[33]  I. Kolmanovsky,et al.  Issues in Modelling and Control of Intake Flow In Variable Geometry , 2009 .

[34]  Jayant V. Sarlashkar,et al.  AN AIRFLOW-DOMINANT CONTROL SYSTEM FOR FUTURE DIESEL ENGINES , 2007 .