Material Modeling and Ballistic-Resistance Analysis of Armor-Grade Composites Reinforced with High-Performance Fibers

A new ballistic material model for 0°/90° cross-plied oriented ultra-high molecular weight (UHMW) polyethylene fiber-based armor-grade composite laminates has been constructed using open-literature data for the fiber and polymeric-matrix material properties and the general experimental/field-test observations regarding the deformation and failure modes in these types of materials. The present model is an extension of our recently developed unit cell-based ballistic material model for the same class of composites (M. Grujicic, G. Arakere, T. He,W.C. Bell, B. A. Cheeseman, C.-F. Yen, and B. Scott, A Ballistic Material Model for Cross-Plied Unidirectional Ultra-High Molecular-Weight Polyethylene Fiber-reinforced Armor-Grade Composites, Mater. Sci. Eng, A 2008, 498(1-2), p 231-241) which was found to be physically sound, but computationally not very efficient. The present model is constructed in such a way that it can be readily integrated into commercial finite element programs like ANSYS/Autodyn (ANSYS/Autodyn version 11.0, User Documentation, Century Dynamics Inc., a subsidiary of ANSYS Inc., 2007), as a User Material Subroutine. To validate the model, a series of transient nonlinear dynamics computational analyses of the transverse impact of armor-grade composite laminates with two types of bullets/projectiles is carried out and the computational results compared with their experimental counterparts. Relatively good agreement is found between the experiment and the computational analysis relative to: (a) the success of the armor panels of different areal densities in defeating the bullets at different initial bullet velocities; (b) postmortem spatial distribution of the damage modes and the extents within the panels; (c) the temporal evolution of the armor-panel back-face bulge; and (d) The existence of three distinct armor-penetration stages (i.e., an initial filament shearing/cutting dominated stage, an intermediate stage characterized by pronounced filament/matrix debonding/decohesion, and a final stage associated with the extensive filaments extension and armor-panel back-face bulging).

[1]  Trevor Mudge,et al.  An Analytical Model , 1996 .

[2]  M. Grujicic,et al.  The effect of covalent functionalization of carbon nanotube reinforcements on the atomic-level mechanical properties of poly-vinyl-ester-epoxy , 2007 .

[3]  B. Lee,et al.  Failure of Spectra® Polyethylene Fiber-Reinforced Composites under Ballistic Impact Loading , 1994 .

[4]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[5]  H. B. Chin,et al.  Analysis of the temperature rise in the projectile and extended chain polyethylene fiber composite armor during ballistic impact and penetration , 1994 .

[6]  N. Cristescu,et al.  Failure Mechanisms in Composite Plates Impacted by Blunt-Ended Penetrators , 1975 .

[7]  M. Jacobs,et al.  Ballistic protection mechanisms in personal armour , 2001 .

[8]  P. Cunniff,et al.  An Analysis of the System Effects in Woven Fabrics under Ballistic Impact , 1992 .

[9]  Mica Grujicic,et al.  A computational analysis of survivability of a pick‐up truck subjected to mine detonation loads , 2011 .

[10]  Mica Grujicic,et al.  A ballistic material model for cross-plied unidirectional ultra-high molecular-weight polyethylene fiber-reinforced armor-grade composites , 2008 .

[11]  Jack C. Smith,et al.  Stress-Strain Relationships in Yarns Subjected to Rapid Impact Loading , 1962 .

[12]  Douglas S. Cairns,et al.  Transient response of graphite/epoxy and Kevlar/epoxy laminates subjected to impact , 1988 .

[13]  B. Lee,et al.  Penetration Failure Mechanisms of Armor-Grade Fiber Composites under Impact , 2001 .

[14]  W. Goldsmith,et al.  Penetration of laminated Kevlar by projectiles—II. Analytical model , 1992 .

[15]  Mica Grujicic,et al.  Ballistic Performance of Alumina/S‐2 Glass‐reinforced Polymer‐matrix Composite Hybrid Lightweight Armor Against Armor Piercing (ap) and Non‐AP Projectiles , 2007 .

[16]  E. Lavernia,et al.  An experimental investigation , 1992, Metallurgical and Materials Transactions A.

[17]  H. F. Schiefer,et al.  Stress-Strain Relationships. in Yarns Subjected to Rapid Impact Loading , 1960 .

[18]  David Roylance,et al.  Ballistic Impact of Textile Structures , 1973 .

[19]  R. Zee,et al.  Response of polymer composites to high and low velocity impact , 1990 .

[20]  W. Goldsmith,et al.  Penetration of laminated Kevlar by projectiles. I : Experimental investigation , 1992 .