Fabrication of Circuits on Flexible Substrates Using Conductive SU-8 for Sensing Applications

This article describes a new low-cost rapid microfabrication technology for high-density interconnects and passive devices on flexible substrates for sensing applications. Silver nanoparticles with an average size of 80 nm were used to create a conductive SU-8 mixture with a concentration of wt 25%. The patterned structures after hard baking have a sheet resistance of 11.17 Ω/☐. This conductive SU-8 was used to pattern planar inductors, capacitors and interconnection lines on flexible Kapton film. The conductive SU-8 structures were used as a seed layer for a subsequent electroplating process to increase the conductivity of the devices. Examples of inductors, resistor-capacitor (RC) and inductor-capacitor (LC) circuits, interconnection lines and a near-field communication (NFC) antenna are presented as a demonstration. As an example of high-resolution miniaturization, we fabricated microinductors having line widths of 5 μm. Mechanical bending tests were successful down to a 5 mm radius. To the best of the authors’ knowledge, this is the first report of conductive SU-8 used to fabricate such planar devices and the first on flexible substrates. This is a proof of concept that this fabrication approach can be used as an alternative for microfabrication of planar passive devices on flexible substrates.

[1]  Tingrui Pan,et al.  CNT-based photopatternable nanocomposites with high electrical conductivity and optical transparency , 2010 .

[2]  P. Renaud,et al.  Conductive SU8 Photoresist for Microfabrication , 2005 .

[3]  A. Bertsch,et al.  Composite photopolymer microstructures: from planar to 3D devices , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[4]  N. Hauptman,et al.  Carbon based conductive photoresist , 2009 .

[5]  Yahya Rahmat-Samii,et al.  Fractal antennas: a novel antenna miniaturization technique, and applications , 2002 .

[6]  J. Brugger,et al.  Carbon nanotubes–SU8 composite for flexible conductive inkjet printable applications , 2012 .

[7]  D. Temple,et al.  Development and evaluation of bend‐testing techniques for flexible‐display applications , 2005 .

[8]  J. D. Venables,et al.  Adhesion and durability of metal-polymer bonds , 1984 .

[9]  Zhonghua Ni,et al.  Investigation of the maskless lithography technique for the rapid and cost-effective prototyping of microfluidic devices in laboratories , 2013 .

[10]  P. Renaud,et al.  SU8‐Silver Photosensitive Nanocomposite , 2004 .

[11]  Mike Golio RF and microwave semiconductor device handbook , 2003 .

[12]  Z. Suo,et al.  Mechanics of rollable and foldable film-on-foil electronics , 1999 .

[13]  R. Feng,et al.  Influence of processing conditions on the thermal and mechanical properties of SU8 negative photoresist coatings , 2002 .

[14]  L. Forr'o,et al.  Electrical conductivity of multi-walled carbon nanotubes-SU8 epoxy composites , 2013, 1306.2891.

[15]  Winco K.C. Yung,et al.  Embedded components in printed circuit boards: a processing technology review , 2005 .

[16]  W. Rosellini,et al.  A SU-8-Based Fully Integrated Biocompatible Inductively Powered Wireless Neurostimulator , 2013, Journal of Microelectromechanical Systems.

[17]  L. Blum,et al.  SU-8-carbon composite as conductive photoresist for biochip applications. , 2012, Biosensors & bioelectronics.

[18]  P. Vettiger,et al.  Microfabricated photoplastic cantilever with integrated photoplastic/carbon based piezoresistive strain sensor , 2006 .

[19]  Edmond Cretu,et al.  MEMS transducers low-cost fabrication using SU-8 in a sacrificial layer-free process , 2017 .

[20]  L. Forró,et al.  Electrical conduction of photo-patternable SU8–graphene composites , 2014 .

[21]  J. W. Brown,et al.  Suspension of nanoparticles in SU-8: Processing and characterization of nanocomposite polymers , 2008, Microelectron. J..

[22]  D. F. Moore,et al.  SU-8 thick photoresist processing as a functional material for MEMS applications , 2002 .

[23]  Qiang Fang,et al.  Development of a conductive photoresist with a mixture of SU-8 and HCl doped polyaniline , 2005, TENCON 2005 - 2005 IEEE Region 10 Conference.

[24]  S. Pizer,et al.  The Image Processing Handbook , 1994 .

[25]  A. Bertsch,et al.  Conductive SU8-silver composite photopolymer , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.