Estimation of the tensile strength of an oriented flax fiber-reinforced polymer composite

Unidirectional orientation of natural fibers in a polymer composite ensures the highest efficiency of reinforcement. Flax fiber reinforcement is discontinuous due to limited fiber length and heterogeneous due to the presence of elementary fibers and their bundles. In order to assess the upper limit of tensile strength of such slightly misoriented, nominally UD natural fiber composite, a statistical strength model of continuous UD fiber reinforced composites is applied. It is found that the experimental strength of UD flax composites, produced from rovings or manually aligned fibers, approaches the theoretical limit only at relatively low fiber volume fraction ca. 0.2, being markedly below it at higher fiber content.

[1]  Lu Zhang,et al.  Commingled natural fibre/polypropylene wrap spun yarns for structured thermoplastic composites , 2010 .

[2]  Ignace Verpoest,et al.  Influence of processing and chemical treatment of flax fibres on their composites , 2001 .

[3]  H. Fukuda.  1.13 – Thermoelastic Properties of Discontinuous Fiber Composites , 2000 .

[4]  James Thomason,et al.  Why are natural fibres failing to deliver on composite performance , 2009 .

[5]  T. Okabe,et al.  Prediction of Tensile Strength of Unidirectional CFRP Composites , 2010 .

[6]  R. Joffe,et al.  Interfacial shear strength of flax fiber/thermoset polymers estimated by fiber fragmentation tests , 2005 .

[7]  W. Curtin,et al.  Strength and reliability of notched fiber-reinforced composites , 1997 .

[8]  J. Karger‐Kocsis,et al.  Tensile Fracture and Failure Behavior of Thermoplastic Starch with Unidirectional and Cross‐Ply Flax Fiber Reinforcements , 2003 .

[9]  I. Verpoest,et al.  Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment , 2006 .

[10]  Anthony Kelly,et al.  Comprehensive composite materials , 1999 .

[11]  E. Spārniņš,et al.  Ultimate strain and deformability of elementary flax fibres , 2011 .

[12]  P. Kiekens,et al.  Development of a Flax/Polypropylene Composite with Optimal Mechanical Characteristics by Fiber and Matrix Modification , 2002 .

[13]  R. Joffe,et al.  Evaluation of interfacial shear strength by tensile tests of impregnated flax fiber yarns , 2012 .

[14]  B. Madsen,et al.  Physical and mechanical properties of unidirectional plant fibre composites: an evaluation of the influence of porosity , 2003 .

[15]  R. Joffe,et al.  Strength distribution of elementary flax fibres , 2005 .

[16]  C. Hill,et al.  Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites , 2007 .

[17]  N. Takeda,et al.  Size effect on tensile strength of unidirectional CFRP composites— experiment and simulation , 2002 .

[18]  ‘Green’ composites Part 2: Characterization of flax yarn and glutaraldehyde/poly(vinyl alcohol) modified soy protein concentrate composites , 2005 .

[19]  William A. Curtin,et al.  Strength and reliability of fiber-reinforced composites: Localized load-sharing and associated size effects , 1997 .

[20]  W. Curtin.  Tensile Strength of Fiber-Reinforced Composites: III. Beyond the Traditional Weibull Model for Fiber Strengths , 2000 .

[21]  James Thomason,et al.  Dependence of interfacial strength on the anisotropic fiber properties of jute reinforced composites , 2010 .

[22]  S. Leigh Phoenix,et al.  1.19 – Statistical Strength Theory for Fibrous Composite Materials , 2000 .

[23]  A. Netravali,et al.  'Green' Composites Using Modified Soy Protein Concentrate Resin and Flax Fabrics and Yarns , 2004 .

[24]  M. Skrifvars,et al.  Development of Flax Fibre based Textile Reinforcements for Composite Applications , 2006 .

[25]  Christophe Baley,et al.  Transverse tensile behaviour of unidirectional plies reinforced with flax fibres , 2006 .

[26]  H. Bos,et al.  Tensile and compressive properties of flax fibres for natural fibre reinforced composites , 2002 .

[27]  E. Spārniņš,et al.  The effect of mechanical defects on the strength distribution of elementary flax fibres , 2009 .

[28]  K. Friedrich,et al.  Pultrusion of a flax/polypropylene yarn , 2007 .

[29]  J. Karger‐Kocsis,et al.  Tensile fracture and failure behavior of technical flax fibers , 2003 .

[30]  J. Bréard,et al.  Mechanical Properties of Flax Fibers and of the Derived Unidirectional Composites , 2010 .

[31]  Chad M. Landis,et al.  Stress concentrations in composites with interface sliding, matrix stiffness and uneven fiber spacing using shear lag theory , 1999 .

[32]  Kristiina Oksman,et al.  High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process , 2001 .

[33]  A. Błędzki,et al.  Influence of fiber structure modification on the mechanical properties of flax fiber-epoxy composites , 1999 .

[34]  H. Bos,et al.  Compressive behaviour of unidirectional flax fibre reinforced composites , 2004 .