Identification of constant contaminant sources in a test chamber with real sensors

Identification of contaminant sources is important for controlling indoor air pollution. Previous studies of source identification are mainly based on computational fluid dynamic simulation results, and studies based on experimental measurements results are scarce. In this paper, six source identification experiments, five with one source and one with two sources, were conducted to investigate the effectiveness of source identification in real situations. A multi-source identification model was developed based on real measurements. The effects of number, layout, sampling duration and sampling interval of the sensors and the number of potential sources on the identification accuracy were analysed. Our findings showed that most of the source scenarios can be identified effectively, including both one- and two-source scenarios. The identification method is most accurate when the potential sources have different effects on sensor network. The identification accuracy can be improved by increasing the number of sensors and sampling duration, and proper arrangement of the sensors, but the sampling interval has a minimal effect. The identification accuracy may decrease with the increase in the number of potential sources. Our research demonstrates the feasibility of applying the source identification method under realistic indoor conditions for various scenarios of buildings.

[1]  A Tikhonov,et al.  Solution of Incorrectly Formulated Problems and the Regularization Method , 1963 .

[2]  Shugang Wang,et al.  Inversely tracking indoor airborne particles to locate their release sources , 2012 .

[3]  Zhilong Chen,et al.  A fast model for identifying multiple indoor contaminant sources by considering sensor threshold and measurement error , 2015 .

[4]  Jelena Srebric,et al.  Real-Time Identification of Indoor Pollutant Source Positions Based on Neural Network Locator of Contaminant Sources and Optimized Sensor Networks , 2010, Journal of the Air & Waste Management Association.

[5]  M. Sohn,et al.  Rapidly Locating and Characterizing Pollutant Releases in Buildings , 2000, Journal of the Air & Waste Management Association.

[6]  David Alan Alexander,et al.  Biochemical terrorism: too awful to contemplate, too serious to ignore: subjective literature review. , 2003, The British journal of psychiatry : the journal of mental science.

[7]  Monica Endregard,et al.  Consequence assessment of indoor dispersion of sarin--a hypothetical scenario. , 2010, Journal of hazardous materials.

[8]  Xianting Li,et al.  Fast Identification of Multiple Indoor Constant Contaminant Sources by Ideal Sensors: A Theoretical Model and Numerical Validation , 2013 .

[9]  Michael A. Matthay,et al.  Viral Pathogens and Acute Lung Injury: Investigations Inspired by the SARS Epidemic and the 2009 H1N1 Influenza Pandemic , 2013, Seminars in Respiratory and Critical Care Medicine.

[10]  Xiaoliang Shao,et al.  An analytical expression for transient distribution of passive contaminant under steady flow field , 2012 .

[11]  Fariborz Haghighat,et al.  Contaminant source identification within a building: Toward design of immune buildings , 2011, Building and Environment.

[12]  Alvin C.K. Lai,et al.  Numerical modeling of exhaled droplet nuclei dispersion and mixing in indoor environments , 2009, Journal of Hazardous Materials.

[13]  Martin Enserink,et al.  SARS: chronology of the epidemic. , 2013, Science.

[14]  Zhang Yu,et al.  Approach to identifying pollutant source and matching flow field , 2013 .

[15]  Jelena Srebric,et al.  Application of Neural Networks Trained with Multi-Zone Models for Fast Detection of Contaminant Source Position in Buildings , 2007 .

[16]  Q. Chen,et al.  Identification of contaminant sources in enclosed environments by inverse CFD modeling. , 2007, Indoor air.

[17]  X Liu,et al.  Location identification for indoor instantaneous point contaminant source by probability-based inverse Computational Fluid Dynamics modeling. , 2007, Indoor air.

[18]  Q Chen,et al.  Identification of contaminant sources in enclosed spaces by a single sensor. , 2007, Indoor air.

[19]  M Siddiqui,et al.  CFD analysis of dense gas dispersion in indoor environment for risk assessment and risk mitigation. , 2012, Journal of hazardous materials.

[20]  Shugang Wang,et al.  An inverse method based on CFD to quantify the temporal release rate of a continuously released pollutant source , 2013 .

[21]  Jin Wen.  Sensor system design for building indoor air protection , 2005, SPIE Optics East.

[22]  Xiang Liu,et al.  Experimental verification of tracking algorithm for dynamically-releasing single indoor contaminant , 2011, Building Simulation.