MICROBIAL FUEL CELL OPERATION WITH PERIODIC CONNECTION OF THE EXTERNAL RESISTANCE

Abstract Laboratory-scale microbial fuel cells are often operated with a constant electrical load. Meanwhile, variations in influent strength and quality, as well as the processes of biofilm growth and decay lead to significant changes of the MFC internal resistance over time. This inevitably results in a mismatch between the internal and the external resistances therefore decreasing MFC power output. This study presents the concept of MFC operation with intermittent connection of the electrical load (external resistance). The efficiency of the proposed method is demonstrated by MFC operation with external resistances significantly below the MFC internal resistance and comparing power outputs obtained using either constant or intermittently connected resistances.

[1]  H. Rismani-Yazdi,et al.  Cathodic limitations in microbial fuel cells: An overview , 2008 .

[2]  Bruce E. Logan,et al.  Microbial Fuel Cells , 2006 .

[3]  S R Guiot,et al.  The effect of real-time external resistance optimization on microbial fuel cell performance. , 2011, Water research.

[4]  Hong Liu,et al.  Quantification of the internal resistance distribution of microbial fuel cells. , 2008, Environmental science & technology.

[5]  Alessandro A. Carmona-Martínez,et al.  Electrospun carbon fiber mat with layered architecture for anode in microbial fuel cells , 2011 .

[6]  Deukhyoun Heo,et al.  Batteryless, wireless sensor powered by a sediment microbial fuel cell. , 2008, Environmental science & technology.

[7]  B. Logan,et al.  Electricity-producing bacterial communities in microbial fuel cells. , 2006, Trends in microbiology.

[8]  Derek R. Lovley,et al.  Bug juice: harvesting electricity with microorganisms , 2006, Nature Reviews Microbiology.

[9]  C. Buisman,et al.  Towards practical implementation of bioelectrochemical wastewater treatment. , 2008, Trends in biotechnology.

[10]  O. Petrii,et al.  Real surface area measurements in electrochemistry , 1991 .

[11]  P.L. Chapman,et al.  Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques , 2007, IEEE Transactions on Energy Conversion.

[12]  W. Verstraete,et al.  Loading rate and external resistance control the electricity generation of microbial fuel cells with different three-dimensional anodes. , 2008, Bioresource technology.

[13]  Michel Perrier,et al.  Comparison of real‐time methods for maximizing power output in microbial fuel cells , 2010 .

[14]  Jung Rae Kim,et al.  Automatic control of load increases power and efficiency in a microbial fuel cell , 2011 .

[15]  Lyne Woodward,et al.  Maximizing power production in a stack of microbial fuel cells using multiunit optimization method , 2009, Biotechnology progress.

[16]  Kostas Kalaitzakis,et al.  Design of a maximum power tracking system for wind-energy-conversion applications , 2006, IEEE Transactions on Industrial Electronics.