An Overview of Polymer–Clay Nanocomposites

[1]  Manish Kumar,et al.  Investigation of structural, rheological and thermal properties of PMMA/ONi-Al LDH nanocomposites synthesized via solvent blending method: Effect of LDH loading , 2016, Chinese Journal of Polymer Science.

[2]  Sabu Thomas,et al.  Clay/Polyaniline Hybrid through Diazonium Chemistry: Conductive Nanofiller with Unusual Effects on Interfacial Properties of Epoxy Nanocomposites. , 2016, Langmuir : the ACS journal of surfaces and colloids.

[3]  M. Kotal,et al.  Polymer nanocomposites from modified clays: Recent advances and challenges , 2015 .

[4]  Sabu Thomas,et al.  Poly(glycidyl methacrylate)-grafted clay nanofiller for highly transparent and mechanically robust epoxy composites , 2015 .

[5]  Manish Kumar,et al.  Properties of PMMA/clay nanocomposites prepared using various compatibilizers , 2015, International Journal of Mechanical and Materials Engineering.

[6]  Manish Kumar,et al.  Synthesis and characterization of exfoliated PMMA/Co–Al LDH nanocomposites via solvent blending technique , 2015 .

[7]  Y. Yagcı,et al.  Efficient photoinduced In situ preparation of clay/poly(glycidyl methacrylate) nanocomposites using hydrogen-donor silane , 2015 .

[8]  D. Robinson,et al.  Reductive atmospheric acid leaching of lateritic smectite/nontronite ores in H2SO4/Cu(II)/SO2 solutions , 2015 .

[9]  Kristiina Oksman,et al.  On the use of nanocellulose as reinforcement in polymer matrix composites , 2014 .

[10]  C. Tsui,et al.  Preparation, optical and thermal properties of CdSe–ZnS/poly(lactic acid) (PLA) nanocomposites , 2014 .

[11]  M. Cran,et al.  Effect of kenaf fibre loading and thymol concentration on the mechanical and thermal properties of PLA/kenaf/thymol composites , 2014 .

[12]  Manish Kumar,et al.  Fabrication of poly(methyl methacrylate) (PMMA) nanocomposites with modified nanoclay by melt intercalation , 2014 .

[13]  Manish Kumar,et al.  Effect of nanoclay content on the structural, thermal properties and thermal degradation kinetics of PMMA/organoclay nanocomposites , 2014 .

[14]  Manish Kumar,et al.  Influence of organically modified NiAl layered double hydroxide (LDH) loading on the rheological properties of poly (methyl methacrylate) (PMMA)/LDH blend solution , 2014 .

[15]  D. K. Aswal,et al.  Novel, ternary clay/polypyrrole/silver hybrid materials through in situ photopolymerization , 2013 .

[16]  Youssef Habibi,et al.  Polylactide (PLA)-based nanocomposites , 2013 .

[17]  K. N. Pandey,et al.  Preparation and properties of in‐situ polymerized polyurethane/stearate intercalated layer double hydroxide nanocomposites , 2013 .

[18]  U. Yilmazer,et al.  Polyamide 66 nanocomposites based on organoclays treated with thermally stable phosphonium salts , 2013 .

[19]  G. Pugazhenthi,et al.  Structural and thermal properties of polystyrene/CoAl-layered double hydroxide nanocomposites prepared via solvent blending: effect of LDH loading , 2013 .

[20]  G. Camino,et al.  Flammability and morphology of HDPE/clay nanocomposites , 2013, Journal of Thermal Analysis and Calorimetry.

[21]  P. Maji,et al.  Efficacy of clay content and microstructure of curing agents on the structure–property relationship of new‐generation polyurethane nanocomposites , 2012 .

[22]  S. Mallakpour,et al.  Polymer/organosilica nanocomposites based on polyimide with benzimidazole linkages and reactive organoclay containing isoleucine amino acid: Synthesis, characterization and morphology properties , 2012 .

[23]  Hongwen Ma,et al.  Preparation, structure and thermal properties of polylactide/sepiolite nanocomposites with and without organic modifiers , 2012 .

[24]  P. Iyer,et al.  Effect of Organomodified Ni-Al Layered Double Hydroxide (OLDH) on the Properties of Polypropylene (PP)/LDH Nanocomposites , 2012 .

[25]  S. Desobry,et al.  Structural, mechanical and barrier properties of active PLA–antioxidant films , 2012 .

[26]  U. Yilmazer,et al.  Use of purified and modified bentonites in linear low-density polyethylene/organoclay/compatibilizer nanocomposites , 2012 .

[27]  R. Frost,et al.  The thermal behavior of kaolinite intercalation complexes : a review , 2012 .

[28]  P. Carreau,et al.  Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender , 2012 .

[29]  Hongxiang Chen,et al.  Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite , 2012 .

[30]  Bin Li,et al.  Effect of intercalated anions on the performance of Ni–Al LDH nanofiller of ethylene vinyl acetate composites , 2012 .

[31]  S. K. Srivastava,et al.  Synergistic effect of organomodification and isocyanate grafting of layered double hydroxide in reinforcing properties of polyurethane nanocomposites , 2011 .

[32]  V. Rives,et al.  Layered double hydroxide/polyethylene terephthalate nanocomposites. Influence of the intercalated LDH anion and the type of polymerization heating method , 2011 .

[33]  B. G. Soares,et al.  Nanostructure and dynamic mechanical properties of silane-functionalized montmorillonite/epoxy nanocomposites , 2011 .

[34]  U. Yilmazer,et al.  Novel thermally stable organo-montmorillonites from phosphonium and imidazolium surfactants , 2011 .

[35]  Jin Huang,et al.  One-pot synthesized polyurethane-based nanocomposites filled by original rectorite with enhanced strength and elongation , 2011 .

[36]  G. Pugazhenthi,et al.  Properties of polystyrene/organically modified layered double hydroxide nanocomposites synthesized by solvent blending method , 2011 .

[37]  G. Pugazhenthi,et al.  Properties and thermal degradation kinetics of polystyrene/organoclay nanocomposites synthesized by solvent blending method: Effect of processing conditions and organoclay loading , 2011 .

[38]  S. K. Srivastava,et al.  Morphology and properties of stearate‐intercalated layered double hydroxide nanoplatelet‐reinforced thermoplastic polyurethane , 2011 .

[39]  R. Gnanamoorthy,et al.  Influence of imbibed moisture and organoclay on tensile and indentation behavior of polyamide 66/hectorite nanocomposites , 2011 .

[40]  P. R. Rajamohanan,et al.  Effect of tethering on the structure-property relationship of TPU-dual modified Laponite clay nanocomposites prepared by ex-situ and in-situ techniques , 2011 .

[41]  F. Wypych,et al.  Mechanical and flame-retardant properties of epoxy/Mg–Al LDH composites , 2011 .

[42]  R. Ruoff,et al.  Graphene-based polymer nanocomposites , 2011 .

[43]  C. Jérôme,et al.  Effect of clay modification on the structure and mechanical properties of polyamide-6 nanocomposites , 2011 .

[44]  S. Chattopadhyay,et al.  Thermal and morphological analysis of thermoplastic polyurethane–clay nanocomposites: Comparison of efficacy of dual modified laponite vs. commercial montmorillonites , 2010 .

[45]  Hubert Rahier,et al.  Quantifying the degree of nanofiller dispersion by advanced thermal analysis: application to polyester nanocomposites prepared by various elaboration methods , 2010 .

[46]  Nabarun Roy,et al.  Novel in situ polydimethylsiloxane-sepiolite nanocomposites: Structure-property relationship , 2010 .

[47]  S. Chattopadhyay,et al.  Preparation and Characterization of Elastomer-Based Nanocomposite Gels Using an Unique Latex Blending Technique , 2010 .

[48]  J. Fernández,et al.  Effect of organic modification of sepiolite for PA 6 polymer/organoclay nanocomposites , 2010 .

[49]  A. Bhowmick,et al.  Exfoliation of Nanolayer Assemblies for Improved Natural Rubber Properties: Methods and Theory , 2010 .

[50]  Feng Chen,et al.  Crystallinity and thermal stability of LDH/polypropylene nanocomposites , 2010 .

[51]  G. Imanzadeh,et al.  Polymer-clay nanocomposites: Free-radical grafting of polyacrylamide onto organophilic montmorillonite , 2010 .

[52]  S. K. Srivastava,et al.  Layered double hydroxide as nanofiller in the development of polyurethane nanocomposites. , 2010, Journal of nanoscience and nanotechnology.

[53]  Jun Wang,et al.  Fabrication of layered double hydroxide spheres through urea hydrolysis and mechanisms involved in the formation , 2010 .

[54]  A. Bhowmick,et al.  Effect of various nanofillers on thermal stability and degradation kinetics of polymer nanocomposites. , 2010, Journal of nanoscience and nanotechnology.

[55]  Lin Li,et al.  POLYMER NANOCOMPOSITES BASED ON FUNCTIONALIZED CARBON NANOTUBES , 2010 .

[56]  A. Bhowmick,et al.  Synergy in carbon black-filled natural rubber nanocomposites. Part I: Mechanical, dynamic mechanical properties, and morphology , 2010 .

[57]  A. Bhowmick,et al.  Unique Tackification Behavior of Needle-like Sepiolite Nanoclay in Brominated Isobutylene-co-p-methylstyrene (BIMS) Rubber , 2010 .

[58]  A. Bhowmick,et al.  Correlation of Vulcanization and Viscoelastic Properties of Nanocomposites Based on Natural Rubber and Different Nanofillers, with Molecular and Supramolecular Structure , 2010 .

[59]  S. Swaminathan,et al.  Polycarbonate/Clay Nanocomposites via in Situ Melt Polycondensation , 2010 .

[60]  S. K. Srivastava,et al.  Thermoplastic polyurethane and nitrile butadiene rubber blends with layered double hydroxide nanocomposites by solution blending , 2010 .

[61]  Tapas Kuila,et al.  Synthesis and characterization of polyurethane/Mg-Al layered double hydroxide nanocomposites , 2009 .

[62]  P. Maji,et al.  Effect of nanoclays on physico-mechanical properties and adhesion of polyester-based polyurethane nanocomposites: structure–property correlations , 2009 .

[63]  J. E. Mark,et al.  A novel biodegradable nanocomposite based on poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) and silylated kaolinite/silica core-shell nanoparticles , 2009 .

[64]  V. Mittal.  Polymer Layered Silicate Nanocomposites: A Review , 2009, Materials.

[65]  Sunil P. Lonkar,et al.  Isothermal crystallization and melting behavior of polypropylene/layered double hydroxide nanocomposites , 2009 .

[66]  M. Zanetti,et al.  Preparation of polymeric hybrid nanocomposites based on PE and nanosilica , 2009 .

[67]  W. C. Tjiu,et al.  Preparation and mechanical properties of exfoliated CoAl layered double hydroxide (LDH)/polyamide 6 nanocomposites by in situ polymerization , 2009 .

[68]  Daphne Benderly,et al.  Material properties of nanoclay PVC composites , 2009 .

[69]  S. Bourbigot,et al.  Supercritical CO2 as an efficient medium for layered silicate organomodification: preparation of thermally stable organoclays and dispersion in polyamide 6 , 2009 .

[70]  J. Rhim,et al.  Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films , 2009 .

[71]  A. Bhowmick,et al.  Quantification of Surface Forces of Thermoplastic Elastomeric Nanocomposites Based on Poly(styrene-ethylene-co-butylene-styrene) and Clay by Atomic Force Microscopy , 2009 .

[72]  P. Maji,et al.  Effect of the microstructure of a hyperbranched polymer and nanoclay loading on the morphology and properties of novel polyurethane nanocomposites. , 2009, ACS Applied Materials and Interfaces.

[73]  A. Bhowmick,et al.  Tailoring properties of styrene butadiene rubber nanocomposite by various nanofillers and their dispersion , 2009 .

[74]  A. Bhowmick,et al.  Effect of different nanoparticles on thermal, mechanical and dynamic mechanical properties of hydrogenated nitrile butadiene rubber nanocomposites , 2009 .

[75]  J. Velasco,et al.  Non-isothermal crystallization kinetics and activity of filler in polypropylene/Mg–Al layered double hydroxide nanocomposites , 2008 .

[76]  H. Bockhorn,et al.  Synthesis and thermal behaviour of polyamide 6/bentonite/ammonium polyphosphate composites , 2008 .

[77]  C. A. Wilkie,et al.  Effect of MgAl-layered double hydroxide exchanged with linear alkyl carboxylates on fire-retardancy of PMMA and PS , 2008 .

[78]  A. Bhowmick,et al.  Structure-property relationship of specialty elastomer-clay nanocomposites , 2008 .

[79]  P. Ding,et al.  Structural characterization and related properties of EVA/ZnAl-LDH nanocomposites prepared by melt and solution intercalation , 2008 .

[80]  K. Rhee,et al.  Effect of surface-modification of clay using 3-aminopropyltriethoxysilane on the wear behavior of clay/epoxy nanocomposites , 2008 .

[81]  S. Woo,et al.  Effects of Modified Clay on the Morphology and Properties of PMMA/Clay Nanocomposites Synthesized by in Situ Polymerization , 2008 .

[82]  C. A. Wilkie,et al.  Polymerically modified layered silicates: an effective route to nanocomposites. , 2008, Journal of nanoscience and nanotechnology.

[83]  A. Bhowmick,et al.  Beneficial Effect of Nanoclay in Atom Transfer Radical Polymerization of Ethyl Acrylate: A One Pot Preparation of Tailor-Made Polymer Nanocomposite , 2008 .

[84]  J. Darr,et al.  Preparation of polypropylene/sepiolite nanocomposites using supercritical CO2 assisted mixing , 2007 .

[85]  M. Modesti,et al.  ABS/clay nanocomposites obtained by a solution technique: Influence of clay organic modifiers , 2007 .

[86]  Chuh‐Yung Chen,et al.  Effect of reactive layered double hydroxides on the thermal and mechanical properties of LDHs/epoxy nanocomposites , 2007 .

[87]  S. Kuo,et al.  Thermal properties of polystyrene nanocomposites formed from rigid intercalation agent‐treated montmorillonite , 2007 .

[88]  Zhen Zheng,et al.  A facile approach to covalently functionalized carbon nanotubes with biocompatible polymer , 2007 .

[89]  John F. Kennedy,et al.  CHITOSAN/ORGANIC RECTORITE NANOCOMPOSITE FILMS: STRUCTURE, CHARACTERISTIC AND DRUG DELIVERY BEHAVIOUR , 2007 .

[90]  B. Qu,et al.  Thermal properties and combustion characterization of nylon 6/MgAl-LDH nanocomposites via organic modification and melt intercalation , 2007 .

[91]  Chuh‐Yung Chen,et al.  The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties , 2006 .

[92]  L. Mathias,et al.  Poly(methyl methacrylate)/Laponite Nanocomposites: Exploring Covalent and Ionic Clay Modifications , 2006 .

[93]  M. Okamoto.  Recent advances in polymer/layered silicate nanocomposites: An overview from science to technology , 2006 .

[94]  H. Ploehn,et al.  Layered Oxide Polymer Nanocomposites: Synthesis, Characterization, and Strategies for Achieving Enhanced Barrier Property , 2006 .

[95]  Yaping Zheng,et al.  Study on sepiolite‐reinforced polymeric nanocomposites , 2006 .

[96]  Yu. P. Gomza,et al.  Synthesis, structure, thermal and mechanical properties of nanocomposites based on linear polymers and layered silicates modified by polymeric quaternary ammonium salts (ionenes) , 2005 .

[97]  Liqun Zhang,et al.  Preparation and properties of natural rubber/rectorite nanocomposites , 2005 .

[98]  J. Putaux,et al.  Surface Assisted Nucleation and Growth of Polymer Latexes on Organically‐Modified Inorganic Particles , 2005 .

[99]  M. Rabello,et al.  Thermal stability of nanocomposites based on polypropylene and bentonite , 2005 .

[100]  A. Bhowmick,et al.  Effect of nanoclay on the dynamic mechanical properties of styrene butadiene and acrylonitrile butadiene rubber vulcanizates , 2005 .

[101]  C. A. Wilkie,et al.  Fire Retardancy of Polystyrene - Hectorite Nanocomposites , 2005 .

[102]  Liqun Zhang,et al.  Influence of fillers on free volume and gas barrier properties in styrene-butadiene rubber studied by positrons , 2005 .

[103]  J. Putaux,et al.  Aqueous Dispersions of Silane-Functionalized Laponite Clay Platelets. A First Step toward the Elaboration of Water-Based Polymer/Clay Nanocomposites , 2004 .

[104]  A. Bhowmick,et al.  Effect of Chain Length of Amine and Nature and Loading of Clay on Styrene-Butadiene Rubber-Clay Nanocomposites , 2003 .

[105]  Wei Chen,et al.  Structural Characteristics and Thermal Properties of PE-g-MA/MgAl-LDH Exfoliation Nanocomposites Synthesized by Solution Intercalation , 2003 .

[106]  R. Bharadwaj,et al.  Structure–property relationships in cross-linked polyester–clay nanocomposites , 2002 .

[107]  Jin-Kook Lee,et al.  Preparation and Characterization of Poly(butyleneterephthalate)/Organoclay Nanocomposites , 2001 .

[108]  K. Wei,et al.  Thermally and Mechanically Enhanced Clay/Polyimide Nanocomposite via Reactive Organoclay , 1999 .

[109]  Takashi Kashiwagi,et al.  Flammability Studies of Polymer Layered Silicate Nanocomposites: Polyolefin, Epoxy and Vinyl Ester Resins , 1999 .

[110]  U. Costantino,et al.  New Synthetic Routes to Hydrotalcite-Like Compounds − Characterisation and Properties of the Obtained Materials , 1998 .

[111]  T. Kurauchi,et al.  Sorption of water in nylon 6‐clay hybrid , 1993 .

[112]  Toshio Kurauchi,et al.  Mechanical properties of nylon 6-clay hybrid , 1993 .

[113]  P. Aranda,et al.  Poly(ethylene oxide)-silicate intercalation materials , 1992 .

[114]  Fabrizio Cavani,et al.  Hydrotalcite-type anionic clays: Preparation, properties and applications. , 1991 .

[115]  H. Murray.  Overview — clay mineral applications , 1991 .

[116]  M. Drezdzon.  Synthesis of isopolymetalate-pillared hydrotalcite via organic-anion-pillared precursors , 1988 .

[117]  B. Dobias,et al.  Exchange enthalpies of H+ and OH− adsorption on minerals with different characters of potential-determining ions , 1988 .