Loading protocols for European regions of low to moderate seismicity

Existing loading protocols for quasi-static cyclic testing of structures are based on recordings from regions of high seismicity. For regions of low to moderate seismicity they overestimate imposed cumulative damage demands. Since structural capacities are a function of demand, existing loading protocols applied to specimens representative of structures in low to moderate seismicity regions might underestimate structural strength and deformation capacity. To overcome this problem, this paper deals with the development of cyclic loading protocols for European regions of low to moderate seismicity. Cumulative damage demands imposed by a set of 60 ground motion records are evaluated for a wide variety of SDOF systems that reflect the fundamental properties of a large portion of the existing building stock. The ground motions are representative of the seismic hazard level corresponding to a 2 % probability of exceedance in 50 years in a European moderate seismicity region. To meet the calculated cumulative damage demands, loading protocols for different structural types and vibration periods are developed. For comparison, cumulative seismic demands are also calculated for existing protocols and a set of records that was used in a previous study on loading protocols for regions of high seismicity. The median cumulative demands for regions of low to moderate seismicity are significantly less than those of existing protocols and records of high seismicity regions. For regions of low to moderate seismicity the new protocols might therefore result in larger strength and deformation capacities and hence in more cost-effective structural configurations or less expensive retrofit measures.

[1]  Bashir Alam,et al.  Seismic Performance of Stone Masonry Buildings Used in the Himalayan Belt , 2013 .

[2]  Luis Ibarra,et al.  Development of a testing protocol for woodframe structures , 1999 .

[3]  M. Fardis,et al.  Designer's guide to EN 1998-1 and en 1998-5 Eurocode 8: Design of structures for earthquake resistance; general rules, seismic actions, design rules for buildings, foundations and retaining structures/ M.Fardis[et al.] , 2005 .

[4]  Chia-Ming Uang,et al.  Testing Protocol for Short Links in Eccentrically Braced Frames , 2006 .

[5]  Helmut Krawinkler,et al.  LOADING HISTORIES FOR CYCLIC TESTS IN SUPPORT OF PERFORMANCE ASSESSMENT OF STRUCTURAL COMPONENTS , 2009 .

[6]  S. Frumento.  Interpretation of experimental shear tests on clay brick masonry walls and evaluation of q-factors for seismic design , 2009 .

[7]  Darrell F. Socie,et al.  Simple rainflow counting algorithms , 1982 .

[8]  I. Iervolino,et al.  Eurocode 8 Compliant Real Record Sets for Seismic Analysis of Structures , 2008 .

[9]  Gian Michele,et al.  Direct Displacement-Based Seismic Design of Structures , 2007 .

[10]  Wayne Stewart,et al.  The seismic design of plywood sheathed shear walls. , 1987 .

[11]  Donat Fäh,et al.  Probabilistic seismic hazard assessment of Switzerland: best estimates and uncertainties , 2009 .

[12]  Sigmund A. Freeman,et al.  REVIEW OF THE DEVELOPMENT OF THE CAPACITY SPECTRUM METHOD , 2004 .

[13]  Alper Aldemir,et al.  Seismic Performance Assessment of Unreinforced Masonry Buildings with a Hybrid Modeling Approach , 2013 .

[14]  Andre Filiatrault,et al.  Testing Protocol for Experimental Seismic Qualification of Distributed Nonstructural Systems , 2011 .

[15]  K. Gatto,et al.  Effects of Loading Protocol on the Cyclic Response of Woodframe Shearwalls , 2003 .

[16]  Richard A. Behr,et al.  Seismic Test Methods for Architectural Glazing Systems , 1996 .

[17]  Andre Filiatrault,et al.  Hysteretic damping of wood framed buildings , 2003 .

[18]  Jian Zhang,et al.  Development of a Drift Protocol for Seismic Performance Evaluation considering a Damage Index Concept , 2011 .

[19]  Mjn Priestley,et al.  VISCOUS DAMPING IN SEISMIC DESIGN AND ANALYSIS , 2005 .

[20]  Jure Radić,et al.  Actions on structures , 2006 .

[21]  Michael N. Fardis,et al.  Seismic Design, Assessment and Retrofitting of Concrete Buildings , 2009 .

[22]  S. Kramer.  Geotechnical Earthquake Engineering , 1996 .