Operational tests of wear dynamics of drills made of low-alloy high-speed HS2-5-1 steel

[1]  G. Królczyk,et al.  Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed milling , 2015 .

[2]  J. Paulo Davim,et al.  Tool Design, Tool Wear and Tool Life , 2009 .

[3]  Jao-Hwa Kuang,et al.  Effect of crack on drilling vibration , 2009 .

[4]  Xiao Hu Zheng,et al.  Optimization of Twist Drill’s Geometry for Cast Iron , 2010 .

[5]  Damian Przestacki,et al.  Surface roughness analysis after laser assisted machining of hard to cut materials , 2014 .

[6]  G. Rutelli,et al.  Tool wear monitoring based on cutting power measurement , 1990 .

[7]  Andreas Zabel,et al.  Deep hole drilling using tools with small diameters—Process analysis and process design , 2012 .

[8]  Martin Gomez,et al.  Tool wear evaluation in drilling by acoustic emission , 2010 .

[9]  Yu. A. Nikitin,et al.  Monitoring and prediction of cutting-tool wear , 2008 .

[10]  P. Molian.  ENGINEERING APPLICATIONS AND ANALYSIS OF HARDINING DATA FOR LASER HEAT TREATED FERROUS ALLOYS , 1986 .

[12]  Analiza mechanizmów zużycia wierteł ze stali HS6-5-2 z powłokami Ti(C, N) wytworzonymi metodą PVD, po badaniach eksploatacyjnych , 2010 .

[13]  P. Pieśko,et al.  Wear of milling cutters resulting from high silicon aluminium alloy cast AlSi21CuNi machining , 2014 .

[14]  W. Grzesik,et al.  Investigations of surface textures produced by oblique machining of different workpiece materials , 2011 .

[15]  Piotr Niesłony,et al.  Determination of tool life and research wear during duplex stainless steel turning , 2015 .

[16]  Y. S. Tarng,et al.  In-process prediction of corner wear in drilling operations , 2000 .

[17]  M. Mansori,et al.  Drilling performance of green austempered ductile iron (ADI) grade produced by novel manufacturing technology , 2012 .

[18]  E. Kilickap,et al.  Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite , 2010, Expert Syst. Appl..

[19]  R. Peng,et al.  SURFACE RESIDUAL STRESSES IN DRY TURNING OF 0.45% C STEEL , 2009 .

[20]  S. Dolinsek.  Work-hardening in the drilling of austenitic stainless steels , 2003 .

[21]  Jozef Jurko,et al.  Study of Changes the Tool Wear of the Cutting Tool Part of a New Cast Iron GTW 35-04 during Drilling , 2013 .

[22]  Stanislaw Legutko,et al.  Predicting the tool life in the dry machining of duplex stainless steel , 2013 .

[24]  B. Y. Leea,et al.  In-process prediction of corner wear in drilling operations , 1998 .