Compositionally graded yttria-stabilized zirconia coating on stainless steel using laser engineered net shaping (LENS™)

Fully dense, compositionally graded yttria-stabilized zirconia coatings have been developed using LENS™. Due to high thermal gradients and cooling rates in LENS™, a fine coating microstructure with a hardness in the range of 1700–2000 Hv is produced. The rapid heat loss through the substrate resulted in the directional growth of grains along the thickness direction. The inherent advantage of this approach is its ability to simultaneously control composition and micron level features to produce feature-based thermal barrier coatings.

[1]  Christopher C. Berndt,et al.  Concept of Functionally Graded Materials for Advanced Thermal Barrier Coating Applications , 1996 .

[2]  M. V. D. Burg,et al.  METAL-CERAMIC INTERFACES PRODUCED BY LASER MELT INJECTION PROCESSING , 1995 .

[3]  Lin Li,et al.  Laser processing of yttria stabilised zirconia/alumina coatings on Fecralloy substrates , 2004 .

[4]  G. Montavon,et al.  Modification of thermal barrier coating architecture by in situ laser remelting , 2006 .

[5]  J. Mazumder,et al.  Laser assisted surface coatings , 1996 .

[6]  K. Stern Metallurgical and ceramic protective coatings , 1996 .

[7]  Marystela Ferreira,et al.  Laser cladding of Ni-Cr/Al2O3 composite coatings on AISI 304 stainless steel , 1997 .

[8]  N. Dahotre,et al.  Laser surface engineering of steel for hard refractory ceramic composite coating , 1999 .

[9]  F. Stott,et al.  Statistical approach for minimizing cracks in combined flame spraying and laser surface modification of refractory ceramics , 2004 .

[10]  P. Bengtsson,et al.  Characterization of microstructural defects in plasma-sprayed thermal barrier coatings , 1995 .

[11]  Klod Kokini,et al.  Interface thermal fracture in functionally graded zirconia–mullite–bond coat alloy thermal barrier coatings , 2003 .

[12]  M. Peters,et al.  Graded coatings for thermal, wear and corrosion barriers , 2003 .

[13]  Xiaorong Xu,et al.  Microstructural characteristics in plasma sprayed functionally graded ZrO2/NiCrAl coatings , 2003 .

[14]  H. Tsai,et al.  Performance of laser-glazed plasma-sprayed (ZrO2-12wt.%Y2O3)/(Ni-22wt.%Cr-10wt.%Al-1wt.%Y) thermal barrier coatings in cyclic oxidation tests , 1995 .

[15]  D. Stöver,et al.  Thermophysical properties and thermal cycling behavior of plasma sprayed thick thermal barrier coatings , 2005 .

[16]  Khiam Aik Khor,et al.  Thermal properties of plasma-sprayed functionally graded thermal barrier coatings , 2000 .

[17]  J. Ouyang,et al.  Laser cladding of yttria partially stabilized ZrO2 (YPSZ) ceramic coatings on aluminum alloys , 2001 .

[18]  J. Ouyang,et al.  Laser cladding of ZrO2-(Ni alloy) composite coating , 1996 .

[19]  J. Ouyang,et al.  Characterization of laser clad yttria partially-stabilized ZrO2 ceramic layers on steel 16MnCr5 , 2001 .