MEGARA Optics: Sub-aperture Stitching Interferometry for Large Surfaces

In this work, we present a detailed analysis of sub-aperture interferogram stitching software to test circular and elliptical clear apertures with diameters and long axes up to 272 and 180 mm, respectively, from the Multi-Espectrografo en GTC de Alta Resolucion para Astronomia (MEGARA). MEGARA is a new spectrograph for the Gran Telescopio Canarias (GTC). It offers a resolution between 6000 and 20000 via the use of volume phase holographic gratings. It has an integral field unit and a set of robots for multi-object spectroscopy at the telescope focal plane. The output end of the fibers forms the spectrograph pseudo-slit. The fixed geometry of the collimator and camera configuration requires prisms in addition to the flat windows of the volume phase holographic gratings. There are 73 optical elements of large aperture and high precision manufactured in Mexico at the Instituto Nacional de Astrofisica, Optica y Electronica (INAOE) and the Centro de Investigaciones en Optica (CIO). The principle of stitching interferometry is to divide the surface being tested into overlapping small sections, which allows an easier analysis (Kim & Wyant 1981). This capability is ideal for non-contact tests for unique and large optics as required by astronomical instruments. We show that the results obtained with our sub-aperture stitching algorithm were consistent with other methods that analyze the entire aperture. We used this method to analyze the 24 MEGARA prisms that could not be tested otherwise. The instrument has been successfully commissioned at GTC in all the spectral configurations. The fulfillment of the irregularity specifications was one of the necessary conditions to comply with the spectral requirements.

[1]  G. Forbes,et al.  Shape specification for axially symmetric optical surfaces. , 2007, Optics express.

[2]  Ernesto Sánchez-Blanco Mancera,et al.  MEGARA spectrograph for the GTC: mechanical and opto-mechanical design , 2012, Other Conferences.

[3]  R. Izazaga-Pérez,et al.  A simple device for sub-aperture stitching of fast convex surfaces , 2015, SPIE Optifab.

[4]  James C. Wyant,et al.  Subaperture test of a large flat or a fast aspheric surface. , 1981 .

[5]  Katsuyuki Okada,et al.  Measurement of large plane surface shapes by connecting small-aperture interferograms , 1994 .

[6]  Katsuyuki Okada,et al.  Measurement of large plane surface shape with interferometric aperture synthesis , 1992, Other Conferences.

[7]  D. H. Hughes,et al.  MEGARA, the new intermediate-resolution optical IFU and MOS for GTC: getting ready for the telescope , 2016, Astronomical Telescopes + Instrumentation.

[8]  G N Lawrence,et al.  Method for subaperture testing interferogram reduction. , 1983, Optics letters.

[9]  Xin Jia,et al.  Error analysis of sub-aperture stitching interferometry , 2012, Other Conferences.

[10]  R Kingslake.  The interferometer patterns due to the primary aberrations , 1925 .

[11]  Daniel Malacara,et al.  Newton, Fizeau, and Haidinger Interferometers , 2006 .

[12]  Cheng-Chung Lee,et al.  Vibration modulated subaperture stitching interferometry. , 2013, Optics express.

[13]  Rudolf Kingslake,et al.  Applied Optics and Optical Engineering , 1983 .

[14]  A. Gil de Paz,et al.  Performance of MEGARA spectrograph optical elements , 2016, Astronomical Telescopes + Instrumentation.