Test data manipulation techniques for energy-frugal, rapid scan test

Scan-based testing methodologies remedy the testability problem of sequential circuits; yet they suffer from prolonged test time and excessive test power due to numerous shift operations. The significant correlation among test stimuli along with the high density of unspecified bits in test data enables the utilization of the existing test stimulus in the scan chain as the seed for the generation of the subsequent test stimulus, thus reducing both test time and test data volume. The proposed scan-based test scheme accesses only a subset of scan cells for loading the subsequent test stimulus while freezing the remaining scan cells with the preceding test stimulus, thus decreasing scan chain transitions during shift operations. The proposed scan architecture is coupled with test data manipulation techniques which include test stimuli ordering and partitioning algorithms, boosting test time reductions. The experimental results confirm the significant reductions in test application time, test data volume and test power achieved by the proposed scan-based testing methodology.

[1]  Sarita Thakar,et al.  On the generation of test patterns for combinational circuits , 1993 .

[2]  Ozgur Sinanoglu,et al.  Modeling scan chain modifications for scan-in test power minimization , 2003, International Test Conference, 2003. Proceedings. ITC 2003..

[3]  Janak H. Patel,et al.  Reducing test application time for full scan embedded cores , 1999, Digest of Papers. Twenty-Ninth Annual International Symposium on Fault-Tolerant Computing (Cat. No.99CB36352).

[4]  Nur A. Touba,et al.  Virtual scan chains: a means for reducing scan length in cores , 2000, Proceedings 18th IEEE VLSI Test Symposium.

[5]  F. Brglez,et al.  A neutral netlist of 10 combinational benchmark circuits and a target translator in FORTRAN , 1985 .

[6]  Ozgur Sinanoglu,et al.  Scan power reduction through test data transition frequency analysis , 2002, Proceedings. International Test Conference.

[7]  Ozgur Sinanoglu,et al.  A novel scan architecture for power-efficient, rapid test , 2002, ICCAD 2002.

[8]  Krishnendu Chakrabarty,et al.  System-on-a-chip test-data compression and decompressionarchitectures based on Golomb codes , 2001, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[9]  Ozgur Sinanoglu,et al.  Aggressive test power reduction through test stimuli transformation , 2003, Proceedings 21st International Conference on Computer Design.

[10]  Akihiro Yamamoto,et al.  Parity-scan design to reduce the cost of test application , 1993, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[11]  David S. Johnson,et al.  Computers and Intractability: A Guide to the Theory of NP-Completeness , 1978 .

[12]  David Bryan,et al.  Combinational profiles of sequential benchmark circuits , 1989, IEEE International Symposium on Circuits and Systems,.

[13]  Lee Whetsel,et al.  Adapting scan architectures for low power operation , 2000, Proceedings International Test Conference 2000 (IEEE Cat. No.00CH37159).

[14]  Nur A. Touba,et al.  Test vector decompression via cyclical scan chains and its application to testing core-based designs , 1998, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270).

[15]  Hans-Joachim Wunderlich,et al.  Minimized Power Consumption for Scan-Based BIST , 2000, J. Electron. Test..

[16]  Alex Orailoglu,et al.  Test volume and application time reduction through scan chain concealment , 2001, Proceedings of the 38th Design Automation Conference (IEEE Cat. No.01CH37232).