Dynamic modelling of local low-temperature heating grids: A case study for Norway

Abstract Today's district heating (DH) networks in Norway are 2nd and 3rd generation systems, with supply temperatures ranging from 80 to 120 °C. In new developments, it is desirable to shift to 4th generation, low-temperature district heating (LTHD) in order to reduce the heat losses and enable better utilization of renewable and waste heat sources. A local LTDH grid for a new development planned in Trondheim, Norway, has been modelled in the dynamic simulation program Dymola in order to study the effect of lowered supply temperatures to heat losses and circulation pump energy use. Different scenarios with supply temperatures ranging from 55 to 95 °C, lowered return temperature as well as peak shaving were analyzed. Real DH use data for buildings in Trondheim were employed. The environmental impact in terms of the total produced CO 2 equivalent emissions was estimated for each scenario, assuming a heat production mix corresponding to that of the local DH provider. The results showed that by lowering the supply temperature to 55 °C, the heat losses could be reduced by one third. The total pump energy increased significantly with reduced supply temperature, however the pump energy was generally an order of magnitude lower than the heat losses.

[1]  Bernd Möller,et al.  Heat Roadmap Europe: Combining district heating with heat savings to decarbonise the EU energy system , 2014 .

[2]  Ralf-Roman Schmidt,et al.  Low temperature district heating in Austria: Energetic, ecologic and economic comparison of four case studies , 2016 .

[3]  Jørgen Erik Christensen,et al.  Low-energy district heating in energy-efficient building areas , 2011 .

[4]  Svend Svendsen,et al.  Method for optimal design of pipes for low-energy district heating, with focus on heat losses , 2011 .

[5]  Jimmie D. Lawson,et al.  Presentation , 2000, MFCSIT.

[6]  Natasa Nord,et al.  Implementation of CCPP for energy supply of future building stock , 2015 .

[7]  Svend Svendsen,et al.  Improving the Dimensioning of Piping Networks and Network Layouts in Low-Energy District Heating Systems Connected to Low-Energy Buildings: A Case Study in Roskilde, Denmark , 2012 .

[8]  Adrienne S. Lavine,et al.  Principles of Heat and Mass Transfer , 2018 .

[9]  Sven Werner.  District Heating and Cooling , 2013 .

[10]  Yongping Yang,et al.  Integrated multiscale simulation of combined heat and power based district heating system , 2015 .

[11]  Brian Elmegaard,et al.  Lowering district heating temperatures – Impact to system performance in current and future Danish energy scenarios , 2016 .

[12]  Brian Vad Mathiesen,et al.  4th Generation District Heating (4GDH) Integrating smart thermal grids into future sustainable energy systems , 2014 .

[13]  F. Haghighat,et al.  Integration of storage and renewable energy into district heating systems: A review of modelling and optimization , 2016 .

[14]  Jlm Jan Hensen,et al.  A Modelica based computational model for evaluating a renewable district heating system , 2014 .

[15]  Roland Baviere,et al.  Presentation, Validation and Application of the DistrictHeating Modelica Library , 2015 .