Research on calculation of contact fatigue life of rough tooth surface considering residual stress

[1]  Jinyuan Tang,et al.  Numerical modeling and experimental verification of residual stress distribution evolution of 12Cr2Ni4A steel generated by shot peening , 2021, Surface and Coatings Technology.

[2]  R. Mašović,et al.  Numerical model for bending fatigue life estimation of carburized spur gears with consideration of the adjacent tooth effect , 2021 .

[3]  Huaiju Liu,et al.  Investigation on stress microcycles and mild wear mechanism in gear contact fatigue , 2021 .

[4]  Y. Ge,et al.  Simulation of the fatigue-wear coupling mechanism of an aviation gear , 2020, Friction.

[5]  Jinyuan Tang,et al.  Study on gear contact fatigue failure competition mechanism considering tooth wear evolution , 2020 .

[6]  R. Jackson,et al.  The effect of resolution on the deterministic finite element elastic-plastic rough surface contact under combined normal and tangential loading , 2020 .

[7]  F. Sadeghi,et al.  A continuum damage mechanics framework for modeling the effect of crystalline anisotropy on rolling contact fatigue , 2019 .

[8]  Raynald Guilbault,et al.  A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue , 2019 .

[9]  Huaiju Liu,et al.  Numerical simulation of competing mechanism between pitting and micro-pitting of a wind turbine gear considering surface roughness , 2019, Engineering Failure Analysis.

[10]  Jinyuan Tang,et al.  Study on the gear fatigue behavior considering the effect of residual stress based on the continuum damage approach , 2019, Engineering Failure Analysis.

[11]  Caichao Zhu,et al.  Investigation of Contact Performance of Case-Hardened Gears Under Plasto-elastohydrodynamic Lubrication , 2019, Tribology Letters.

[12]  R. Jackson,et al.  Deterministic elastic-plastic modelling of rough surface contact including spectral interpolation and comparison to theoretical models , 2019, Tribology International.

[13]  P. Bocher,et al.  Effects of case hardening properties on the contact fatigue of a wind turbine gear pair , 2018 .

[14]  Xiaomin Liu,et al.  Strain gradient plasticity analysis of elasto-plastic contact between rough surfaces , 2016 .

[15]  Brian A. Shaw,et al.  Comparative study of stress analysis of gears with different helix angle using the ISO 6336 standard and tooth contact analysis methods , 2016 .

[16]  G. C. Wang,et al.  Residual stress distribution at grind-hardening layer surface of the 40Cr workpiece , 2015 .

[17]  A. Sorsa,et al.  Quantitative prediction of residual stress and hardness in case-hardened steel based on the Barkhausen noise measurement , 2012 .

[18]  Andrew Starr,et al.  BS‐ISO Helical Gear Fatigue Life Estimation and Wear Quantitative Feature Analysis , 2009 .

[19]  Mark O. Robbins,et al.  Finite element modeling of elasto-plastic contact between rough surfaces , 2005 .

[20]  Daniel Nelias,et al.  Development of a Three-Dimensional Semi-Analytical Elastic-Plastic Contact Code , 2002 .

[21]  Elena Kabo,et al.  Material defects in rolling contact fatigue — influence of overloads and defect clusters , 2002 .

[22]  L. Keer,et al.  A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques , 1999 .

[23]  R. S. Sayles,et al.  Basic principles of rough surface contact analysis using numerical methods , 1996 .

[24]  B. Bhushan,et al.  Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces , 1990 .

[25]  Y. P. Chiu,et al.  On the Stress Field Due to Initial Strains in a Cuboid Surrounded by an Infinite Elastic Space , 1977 .

[26]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[27]  Qian Wang,et al.  A three-dimensional thermomechanical model of contact between non-conforming rough surfaces , 2001 .

[28]  J. Barbera,et al.  Contact mechanics , 1999 .

[29]  J. Thomas,et al.  Flankentragfähigkeit und Laufverhalten von hartfeinbearbeiteten Kegelrädern , 1998 .

[30]  B. Bhushan,et al.  A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle , 1996 .

[31]  B. Bhushan,et al.  Fractal Model of Elastic-Plastic Contact Between Rough Surfaces , 1991 .

[32]  J. Morrow.  Cyclic Plastic Strain Energy and Fatigue of Metals , 1965 .

[33]  F. P. Bowden,et al.  The Friction and Lubrication of Solids , 1964 .