Finite element modelling and simulation of bulk material forming

Purpose – To provide a selective bibliography for researchers working with bulk material forming (specifically the forging, rolling, extrusion and drawing processes) with sources which can help them to be up‐to‐date.Design/methodology/approach – A range of published (1996‐2005) works, which aims to provide theoretical as well as practical information on the material processing namely bulk material forming. Bulk deformation processes used in practice change the shape of the workpiece by plastic deformations under forces applied by tools and dies.Findings – Provides information about each source, indicating what can be found there. Listed references contain journal papers, conference proceedings and theses/dissertations on the subject.Research limitations/implications – It is an exhaustive list of papers (1,693 references are listed) but some papers may be omitted. The emphasis is to present papers written in English language. Sheet material forming processes are not included.Practical implications – A very...

[1]  F. Vollertsen,et al.  A Method for Deep Drawing with Multiple Elastomer Membranes , 1999 .

[2]  Donggeon Lee,et al.  New processes to prevent a flow defect in the combined forward–backward cold extrusion of a piston-pin , 2003 .

[3]  Taylan Altan,et al.  Prediction of hardness distribution in cold backward extruded cups , 1996 .

[4]  Khaled Morsi,et al.  Preliminary evaluation of hot extrusion miniaturization , 1999 .

[5]  Zhengyi Jiang,et al.  Mechanical modelling of friction variation in slab edging with a finite element method approach , 2004 .

[6]  J. Lu,et al.  Computer modeling of the continuous forming extrusion process of AA6061 alloy , 1998 .

[7]  Jian Jun Wu,et al.  A study on the forming limits of the hydromechanical deep drawing of components with stepped geometries , 2004 .

[8]  Noah Utsumi,et al.  Countermeasures against undesirable phenomena in the draw-bending process for extruded square tubes , 2002 .

[9]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[10]  Terry Sheppard,et al.  A study on material flow in isothermal extrusion by FEM simulation , 2004 .

[11]  Robert J. Asaro,et al.  Through-Thickness Texture Gradients in Rolled Polycrystalline Alloys , 1996 .

[12]  Byeong-Chul Kang,et al.  Extension of the Backward Tracing Scheme of the Rigid-Plastic FEM in Three-Dimensional Deformation , 1997 .

[13]  Carlos Alberto Conceição António,et al.  Metal-forming process optimisation by inverse evolutionary search , 2002 .

[14]  Magnus Jarl,et al.  FEM‐Simulation of Drawing Out in Open Die Forging , 2004 .

[15]  S. H. Zhang,et al.  Hydromechanical deep-drawing of aluminum parabolic workpieces—experiments and numerical simulation , 2000 .

[16]  Shen-Haw Ju,et al.  Evaluating stress intensity factors of a surface crack in lubricated rolling contacts , 1999 .

[17]  S. Y Lin,et al.  Influences of the geometrical conditions of die and workpiece on the barreling formation during forging–extrusion process , 2003 .

[18]  O. Hopperstad,et al.  Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study , 2004 .

[19]  Sridhar Santhanam,et al.  An elastic-viscoplastic constitutive model for the hot-forming of aluminum alloys , 2000 .

[20]  Wang Cheng THE DISPOSAL OF KEY PROBLEMS IN 3-D RIGID PLASTIC FEM SIMULATION OF THE EXTRUDING-BULGING PROCESS OF TEE TUBES , 1999 .

[21]  Young Soo Kim,et al.  Coining Process Design by the Three-Dimensional Backward Tracing Scheme of the Finite Element Method and Its Experimental Confirmation , 2002 .

[22]  Henryk Dyja,et al.  FEM ANALYSIS OF METAL FLOW IN HYDRODYNAMIC DRAWING OF STEEL WIRES , 1997 .

[23]  Luís Menezes,et al.  Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing , 2002 .

[24]  李志刚,et al.  Mathematical model of determination of die bearing length in design of aluminum profile extrusion die , 2004 .

[25]  Hoon Huh,et al.  A general algorithm for plastic flow simulation by finite element limit analysis , 1999 .

[26]  Dong Nyung Lee,et al.  Analysis of deformation texture inhomogeneity and stability condition of shear components in f.c.c. metals , 1997 .

[27]  Siamak Serajzadeh,et al.  Modelling the warm rolling of a low carbon steel , 2004 .

[28]  Alan N Bramley,et al.  Principal Outcomes of the EC Thematic Network on Modelling Tools for the Forging Industry , 2002 .

[29]  Sang Moo Hwang,et al.  A Finite Element-Based Integrated Process Model for the Prediction of Thermo-Mechanical and Metallurgical Behavior of Stainless Steel in Cold Strip Rolling , 2003 .

[30]  Hyuk-Hong Kwon,et al.  Development of Ceramic Inserts for Forging Tools , 2000 .

[31]  Hyoung Jin Choi,et al.  A Design of Manufacturing Processes for Valve-Spring Retainer Component , 2005 .

[32]  Dong-Heon Kim,et al.  Optimization of the irregular shape rolling process with an artificial neural network , 2001 .

[33]  Motoo Asakawa,et al.  User-friendly 3D FEM Simulation System for Bar and Wire Rod Rolling Processes , 2000 .

[34]  Ulf Ståhlberg,et al.  Transversal cracks and their behaviour in the hot rolling of steel slabs , 2000 .

[35]  Anil K. Sachdev,et al.  Crashworthiness Performance of Mass-Efficient Extruded Structures , 2002 .

[36]  Mitsuo Hashimoto,et al.  Analysis on Crack Propagation Property of High Speed Steel Type White Cast Iron Roll in Hot Strip Rolling , 2004 .

[37]  Dong-Yol Yang,et al.  Three-dimensional finite element simulation of a spider hot forging process using a new remeshing scheme , 2000 .

[38]  Kunio Hayakawa,et al.  Analysis of Interfacial Damage and Debonding Life Estimation of Cold Forging Tool Coated with Hard Film , 2004 .

[39]  Takafumi Nakayama,et al.  Algorithm for 3D Shape Model Auto-Conversion Based on 2D Drawing of Pipe. , 1997 .

[40]  Nicholas Zabaras,et al.  A continuum sensitivity method for finite thermo‐inelastic deformations with applications to the design of hot forming processes , 2002 .

[41]  Weimin Mao,et al.  A texture optimization study for minimum earing in aluminium by use of a texture component crystal plasticity finite element method , 2004 .

[42]  Manabu Gotoh,et al.  A simple volume loss recovery scheme in non-steady state metal forming analysis by the rigid–plastic FEM , 2003 .

[43]  Peter Frederic Thomson,et al.  A comparison of two procedures for computation of the thermal stresses in hot rolled beams , 1997 .

[44]  O. Mahrenholtz,et al.  Influence of friction and geometry on plastic spread , 1997 .

[45]  Cheng Gang Sun,et al.  Investigation of interfacial behaviors between the strip and roll in hot strip rolling by finite element method , 2005 .

[46]  Natalia Yu. Ermakova,et al.  Plastic deformation model incorporating coordination of grains in a polycrystalline aggregate , 2002, Other Conferences.

[47]  Ken-ichiro Mori,et al.  Three-dimensional rigid-plastic finite element method using diagonal matrix for large-scale simulation of metal-forming processes , 2000 .

[48]  Catarina F. Castro,et al.  An efficient algorithm to estimate optimal preform die shape parameters in forging , 2001 .

[49]  Paulo A.F. Martins,et al.  Fracture predicting in bulk metal forming , 1996 .

[50]  Peter Tiernan,et al.  Dieless wire drawing—an experimental and numerical analysis , 2004 .

[51]  Ho-Chang Kim,et al.  Three-dimensional rigid-plastic finite element analysis of non-steady-state shaped drawing process , 1998 .

[52]  B. H. Park,et al.  Analysis of Front End Bending in Plate Rolling by The Finite Element Method , 1997 .

[53]  Derek A. Linkens,et al.  Roll Force and Torque Prediction Using Neural Network and Finite Element Modelling , 2003 .

[54]  Rajeev Baskiyar Finite element analysis of the temperature profile of rolls , 2000 .

[55]  Jian Cao,et al.  Microforming: Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEM , 2004 .

[56]  Ana Reis,et al.  The use of finite element simulation for optimization of metal forming and tool design , 2001 .

[57]  E. B. Damm,et al.  Modeling hot bar rolling to predict surface quality , 2001 .

[58]  Naksoo Kim,et al.  Finite-element analysis and experimental verification for drawbead drawing processes , 1997 .

[59]  C. M. Sellars,et al.  Multipass rolling of aluminium alloys: finite element simulations and microstructural evolution , 2001 .

[60]  G. Bruno,et al.  Residual stress analysis in aerospace MMC materials by neutron diffraction , 2002 .

[61]  Andrzej Gontarz,et al.  The reasons for structural defects arising in forgings of aluminium alloys analysed using the finite element method , 1999 .

[62]  Khemais Saanouni,et al.  Improvement of forging process of a 3D complex part with respect to damage occurrence , 2003 .

[63]  A. K. Tieu,et al.  3-D finite element modelling of ribbed strip rolling , 2000 .

[64]  Dong Liu,et al.  Selection of Can and Insulating Materials for Controlled-Dwell Extrusion of Gamma-TiAl , 2005 .

[65]  Peter Frederic Thomson,et al.  Solution of the equations of rigid–plastic FE analysis by shifted incomplete Cholesky factorisation and the conjugate gradient method in metal forming processes , 2000 .

[66]  Z. Gawroński Aspects of tribological surface design with particular reference to the effects of low pressure nitriding and residual stresses in rolling contacts , 2001 .

[67]  T. N. Baker,et al.  A comparison of experimental and computer-simulated isothermal upset forging of IMI685 titanium alloy , 1996 .

[68]  Zhang Qiang FINITE ELEMENT ANALYSIS OF STEADY STATE HV ROLLING PROCESS OF SLAB , 1997 .

[69]  J. J. Park,et al.  Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement , 2002 .

[70]  D. M. Petty Application of process modelling - an industrial view , 1996 .

[71]  Qiang Li,et al.  The establishment of a failure criterion in cross wedge rolling , 2004 .

[72]  Dong Young Jang,et al.  Forging parameter optimization considering stress distributions in products through FEM analysis and robust design methodology , 1997 .

[73]  P. van Houtte,et al.  Residual Stress Determination in Cold Drawn Steel Wire by FEM Simulation and X-Ray Diffraction , 2002 .

[74]  Xavier Velay,et al.  Application of finite element method in the hot extrusion of aluminium alloys , 2004 .

[75]  N. Zabaras,et al.  A continuum sensitivity method for the design of multi-stage metal forming processes , 2003 .

[76]  Ichiro Takasu,et al.  Elastic–plastic finite element analysis of cold ring rolling process , 2002 .

[77]  Siamak Serajzadeh,et al.  An investigation on strain inhomogeneity in hot strip rolling process , 2002 .

[78]  Jeries Abou-Hanna,et al.  Sensitivity Analysis of Hydro-Rim Deep Drawing of Cylindrical Cups , 2003 .

[79]  M. Glowacki Simulation of rail rolling using the generalized plane-strain finite-element approach , 1996 .

[80]  I. Flitta,et al.  Nature of friction in extrusion process and its effect on material flow , 2003 .

[81]  Wojciech Z. Misiolek,et al.  Analysis of the Influence of the Initial Billet Geometry and Die Design on the Product Geometry during Bi-Material Tube Extrusion , 2003 .

[82]  Rajendram Balendra,et al.  Pressurising materials and process design considerations of the Pressure-assisted Injection Forging of thick-walled tubular components , 2004 .

[83]  Dieter Schmoeckel,et al.  Analysis of local loads on the draw die profile with regard to wear using the FEM and experimental investigations , 2001 .

[84]  Laurent Dubar,et al.  A new methodology to analyse iron fines during steel cold rolling processes , 2003 .

[85]  Klaus Schwerdtfeger,et al.  Theoretical Analysis of “Slow Hot Rolling” in Direct Linkage with Thin Slab and Strip Continuous Casting , 2003 .

[86]  Reimund Neugebauer,et al.  Modelling of the clamping mark formation in manufacturing processes with extremely high axial forces , 2005 .

[87]  Yoshiharu Mutoh,et al.  Subsurface Crack Propagation in Rolling Contact Fatigue of Sintered Alloy , 2003 .

[88]  John J. Jonas,et al.  Effect of texture on earing in FCC metals: Finite element simulations , 1998 .

[89]  Ann Bettina Richelsen,et al.  COMPARISON OF A NUMERICAL ANALYSIS OF ROLLING WITH EXPERIMENTAL DATA , 1996 .

[90]  Jeong Kim,et al.  Implementation of backward tracing scheme of the FEM for design of initial tubular blank in hydroforming , 2002 .

[91]  Wolfgang Rasp,et al.  Analysis of an improved width-flow concept for the production of ribbed strips by cold rolling , 1999 .

[92]  Laurent Dubar,et al.  Determination of a hardening behaviour law for a cold forging TiN-coated tool steel , 2000 .

[93]  Xiang Hua Liu,et al.  Computational strategies for some technical issues in the simulation of the strip rolling processes using rigid–plastic FEM , 2000 .

[94]  S. Choi,et al.  Simulation of stored energy and orientation gradients in cold-rolled interstitial free steels , 2003 .

[95]  Zone-Ching Lin,et al.  The effect of a slightly concave-shaped roller on strip shape during rolling , 1997 .

[96]  Frédéric Barlat,et al.  Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory , 2001 .

[97]  N. Alexandrova,et al.  Fracture analysis of tube drawing with a mandrel , 2003 .

[98]  Jean-Loup Chenot,et al.  Inverse methods applied to metal forming processes , 2000 .

[99]  B. P. Huynh,et al.  A NUMERICAL INVESTIGATION OF NON-ISOTHERMAL EXTRUSION THROUGH ANNULAR DIES , 1998 .

[100]  P Hartley,et al.  Developments in computational modelling techniques for industrial metal forming processes , 2001 .

[101]  Chinghua Hung,et al.  The finite element analysis on planetary rolling process , 2001 .

[102]  Joachim Danckert The influence of the punch land in backward can extrusion , 2004 .

[103]  Kozo Osakada,et al.  Precision forging process with axially driven container , 1997 .

[104]  Siamak Serajzadeh,et al.  Unsteady state work-roll temperature distribution during continuous hot slab rolling , 2002 .

[105]  D. L. McDowell,et al.  An approximate algorithm for elastic-plastic two-dimensional rolling/sliding contact , 1997 .

[106]  S. M. Hwang,et al.  Die shape optimal design in cold and hot extrusion , 2003 .

[107]  Ann Bettina Richelsen,et al.  Elastic—plastic analysis of the stress and strain distributions in asymmetric rolling , 1997 .

[108]  Hoon Huh,et al.  Design modification in a multi-stage rectangular cup drawing process with a large aspect ratio by an elasto-plastic finite element analysis , 2001 .

[109]  Lihua Zhu,et al.  Computer simulation of the deep extrusion of a thin-walled cup using the thermo-mechanically coupled elasto-plastic FEM , 2000 .

[110]  Tadasu Murakami,et al.  Measurement of pressure distribution on dies in porthole die extrusion. , 1999 .

[111]  Keith Davey,et al.  Efficient Strategies for the Simulation of Railway Wheel Forming , 2001 .

[112]  Nicholas Zabaras,et al.  A Continuum Lagrangian Sensitivity Analysis for Metal Forming Processes with Applications to Die Design Problems , 2000 .

[113]  John G. Lenard,et al.  The effect of scaling on interfacial friction in hot rolling of steels , 1999 .

[114]  H Zhang,et al.  A discussion of the formation of ultra-fine grains in low-carbon steels based on FE analysis , 2002 .

[115]  Trevor A. Dean,et al.  Experimental and theoretical analysis of deformation and microstructural evolution in the hot-die forging of titanium alloy aerofoil sections , 1999 .

[116]  Henry Valberg,et al.  Analysis of the influence of back-pull during drawing of aluminium wires , 2000 .

[117]  Mirosław Głowacki Finite element three-dimensional modelling of the solidification of a metal forming charge , 1996 .

[118]  Lorenzo Donati Use of FEM in Optimizing the Strength of Extrusion Welds and Surface Quality of Aluminum Profiles for Automotive Structures , 2004 .

[119]  R. Radev,et al.  An example of determination of preforming steps in hot die forging , 2004 .

[120]  Mark Jolly,et al.  Finite element simulations and experimental studies on inhomogeneous metal flow in aluminium extrusions with three-dimensional complex geometries , 2002 .

[121]  Frank Eberl,et al.  Texture Gradient Simulations and Measurements in Hot Rolled and Extruded High Strength Aluminium Alloys , 2002 .

[122]  Jonathan A. Wickert,et al.  Stress Field in Finite Width Axisymmetric Wound Rolls , 2002 .

[123]  Kaike Cai,et al.  Principles in cast rolling with liquid core of thin slab continuous casting , 2001 .

[124]  Leon M Keer,et al.  Edge effect on elastic-plastic rolling/sliding contacts , 1996 .

[125]  Youping Chen,et al.  Non-steady-state elastic–plastic behavior of metal forming (rolling) with a generalized friction law , 2000 .

[126]  C. S. Li,et al.  Simulation on temperature field of 50CrV4 automobile gear bar steel in continuous rolling by FEM , 2002 .

[127]  Xu Shuqin,et al.  FEM analysis and experimental research on complex forming , 1997 .

[128]  R. D. Irwin,et al.  The simulation of acoustic emission for metal forging , 1996 .

[129]  Jože Balič,et al.  Deep drawing of tailored blanks without a blankholder , 2003 .

[130]  J. S. Gunasekera,et al.  A Investigation of the Pinch and Roll Process of Compressor Airfoil Manufacture , 2000 .

[131]  AnruiHe,et al.  Backup roll contour in finishing trains of hot rolling based on hybrid genetic algorithm , 2002 .

[132]  M. Brunet,et al.  Computer aided design of roll-forming of channel sections , 1996 .

[133]  Rajiv Shivpuri,et al.  Microstructure and Mechanics Interaction in the Modeling of Hot Rolling of Rods , 1999 .

[134]  Chris Huw John Davies,et al.  Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation , 2004 .

[135]  Hiroshi Utsunomiya,et al.  Three-dimensional topography of the matt surface in aluminium pack rolling , 2004 .

[136]  Andrzej Rosochowski,et al.  Secondary yielding of forged components due to unloading , 2001 .

[137]  Naksoo Kim,et al.  A parametric study on forming length in roll forming , 2001 .

[138]  Shinya Yamamoto,et al.  Three-dimensional FEM simulation of the influence of drawing in setting angle used in wiredrawing , 2003 .

[139]  Taylan Altan,et al.  Prediction and elimination of springback in straight flanging using computer-aided design methods: Part 2: FEM predictions and tool design , 2001 .

[140]  Hui Long,et al.  FE simulation of the influence of thermal and elastic effects on the accuracy of cold-extruded components , 1998 .

[141]  N. Venkata Reddy,et al.  Ductile fracture criteria and its prediction in axisymmetric drawing , 2000 .

[142]  N Ramakrishnan,et al.  CAE for forging of titanium alloy aero-engine disc and integration with CAD–CAM for fabrication of the dies , 2002 .

[143]  Dong Nyung Lee,et al.  An upper bound solution of tube drawing , 1997 .

[144]  Nobuki Yukawa,et al.  Computer Simulation and Control of Microstructure and Mechanical Properties in Hot Forging , 1999 .

[145]  Yong-Taek Im,et al.  Rigid–thermoviscoplastic finite-element analysis of the semi-solid forging of Al2024 , 1999 .

[146]  Taylan Altan,et al.  Process control in blanking , 1997 .

[147]  Jian Cao,et al.  Assessment of corner failure depths in the deep drawing of 3D panels using simplified 2D numerical and analytical models , 2001 .

[148]  Yong-Taek Im,et al.  Finite-element investigation of the wear and elastic deformation of dies in metal forming , 1999 .

[149]  Chris A McMahon,et al.  Finite element modelling of the effect of non-metallic inclusions in metal forming processes , 1999 .

[150]  Eiji Sato,et al.  Effect of multi-axial loading path on limiting drawing ratio , 1997 .

[151]  Hae Yong Cho,et al.  Process design of the cold forging of a billet by forward and backward extrusion , 2003 .

[152]  Claudio Giardini,et al.  Prediction of the expulsion load in precision forging operations , 1998 .

[153]  Surya R. Kalidindi,et al.  Quantitative prediction of textures in aluminium cold rolled to moderate strains , 2002 .

[154]  Sang Moo Hwang,et al.  Precision online model for prediction of strip temperature in hot strip rolling , 2004 .

[155]  Yang Li Numerical simulation on microstructural evolution during multipass hot-rolling of aluminum alloys , 2001 .

[156]  张利,et al.  Coupled Thermo-Mechanical Modeling of Long Cone-Shaped Forging Based on Rigid Visco-Plastic FEM , 2002 .

[157]  Paulo A.F. Martins,et al.  An investigation into the preforming of tubes , 1997 .

[158]  Bingji Li FEM : AN EFFECTIVE TOOL FOR DEVELOPMENT AND DESIGN IN SHAPE ROLLING , 1998 .

[159]  Terry Sheppard,et al.  Lateral deformation during hot flat rolling of aluminium alloys , 2002 .

[160]  Lu Yan,et al.  Three-dimensional rigid-plastic finite-element analysis of the isothermal precision forging of a cylindrical housing , 2000 .

[161]  P Phelan,et al.  A method for the prediction of ductile fracture by central bursts in axisymmetric extrusion , 2005 .

[162]  Y. Im,et al.  Prediction of ductile fracture in cold forging of aluminum alloy , 1999 .

[163]  Takashi Kuboki,et al.  Method for suppressing the surface cracking in cold forging , 2003 .

[164]  Kazutake Komori,et al.  Effect of ductile fracture criteria on chevron crack formation and evolution in drawing , 2003 .

[165]  Taylan Altan,et al.  Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis Technique , 2003 .

[166]  Young-Ho Jung,et al.  Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation , 2002 .

[167]  Anh Kiet Tieu,et al.  Finite element modelling of mixed film lubrication in cold strip rolling , 2004 .

[168]  Wang,et al.  THREE-DIMENSIONAL FINITE-ELEMENT SIMULATION OF STRETCHING TECHNOLOGICAL PARAMETERS bt/h AND bb/h OF HEAVY FORGINGS , 2001 .

[169]  英一 山田,et al.  オーステナイト系ステンレス鋼鍛造材の極低温破壊および発熱・温度上昇に関する実験・有限要素解析 , 1997 .

[170]  Yong-Taek Im,et al.  Finite Element Investigation of Equal Channel Angular Extrusion Process , 2004 .

[171]  Jaroslav Mackerle,et al.  Finite element methods and material processing technology , 1994 .

[172]  Kazutake Komori,et al.  Simulation of deformation and temperature in multi-pass caliber rolling , 1997 .

[173]  C. G. Sun,et al.  Prediction of Three Dimensional Strip Temperatures through the Entire Finishing Mill in Hot Strip Rolling by Finite Element Method , 2002 .

[174]  E.-G. Yoh,et al.  Modeling Brittle Damage Evolution in Forging/Extrusion Die , 2002 .

[175]  J. H. Chung,et al.  Finite element analysis of a multi-stage axisymmetric forging process having a spring-attached die for controlling metal flow lines , 1998 .

[176]  O. Mahrenholtz,et al.  Influence of surface roughness on friction during metal forming processes , 2005 .

[177]  Chung-Gil Kang,et al.  Semisolid forming process—numerical simulation and experimental study , 2001 .

[178]  Sean Li,et al.  Effect of acute tool-angles on equal channel angular extrusion/pressing , 2005 .

[179]  Jean-Loup Chenot,et al.  OPTIMAL DESIGN FOR NON-STEADY-STATE METAL FORMING PROCESSES. II: APPLICATION OF SHAPE OPTIMIZATION IN FORGING , 1996 .

[180]  Chung-Gil Kang,et al.  Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion , 2005 .

[181]  J. Korelc,et al.  APPLICATION OF DAMAGE MODEL FOR NUMERICAL DETERMINATION OF CARRYING CAPACITY OF LARGE ROLLING BEARINGS , 2004 .

[182]  W. J. Kwak,et al.  A precision on-line model for the prediction of roll force and roll power in hot-strip rolling , 2002 .

[183]  Jurek Duszczyk,et al.  A 3D FEM simulation study on the isothermal extrusion of a 7075 aluminium billet with a predetermined non-linear temperature distribution , 2003 .

[184]  Siamak Serajzadeh,et al.  Prediction of temperature distribution in the hot rolling of slabs , 2002 .

[185]  S. X. Zhou,et al.  An integrated model for hot rolling of steel strips , 2003 .

[186]  Taylan Altan,et al.  Investigation of metal flow and preform optimization in flashless forging of a connecting rod , 1996 .

[187]  Youho Choi,et al.  Investigations of weld-line movements for the deep drawing process of tailor welded blanks , 2000 .

[188]  Jaroslav Mackerle Finite element methods and material processing technology, an addendum (1994‐1996) , 1998 .

[189]  Miroslaw Glowacki,et al.  Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods , 1996 .

[190]  Paulo A.F. Martins,et al.  Three-dimensional thermo-mechanical finite element simulation of the vertical–horizontal rolling process , 2001 .

[191]  Peter Wild,et al.  Deep drawing of pressure vessel end closures: finite element simulation and validation , 2000 .

[192]  Hyoung Jin Choi,et al.  Rigid-Plastic Finite Element Analysis Applied Frictional Contact Problem in the Composite Rod Extrusion Process , 2005 .

[193]  Hyunbo Shim,et al.  Contact treatment algorithm for the trimmed NURBS surface , 2000 .

[194]  Cliff J. Lissenden,et al.  Finite Element Simulation of Ausforming of Austempered Ductile Iron Components , 2001 .

[195]  Mpf Sutcliffe,et al.  Evolution of matt surface topography in aluminium pack rolling. Part II: effect of material properties , 2004 .

[196]  Tarras Wanheim,et al.  The influence of the constitutive behaviour of materials on the formability in radial extrusion of tubular components , 1998 .

[197]  S. Mahdavian,et al.  Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2-laser , 2004 .

[198]  Ulf Engel,et al.  Microforming—from basic research to its realization , 2002 .

[199]  Fengshan Du,et al.  Hot deformation of austenite and prediction of microstructure evolution of cross-wedge rolling , 2004 .

[200]  Andrzej Milenin,et al.  Simulation of metal forming during multi-pass rolling of shape bars , 2004 .

[201]  Y. Choi,et al.  Design for stiffness reinforcement in backward extrusion die , 2002 .

[202]  R. Balendra,et al.  FE analysis of a novel roller form: a deep end-cavity roller for roller-type bearings , 2004 .

[203]  Y Jiang,et al.  Elastic-Plastic Finite Element Stress Analysis of Two-Dimensional Rolling Contact , 2001 .

[204]  L. Cannizzaro,et al.  Validation of Frictional Studies by Double-Cup Extrusion Tests in Cold-Forming , 1996 .

[205]  Xueyu,et al.  INTERFACE DEFORMATION CHARACTERISTICS OF BIMETAL FORMING , 1998 .

[206]  M. Predeleanu,et al.  Damage mechanics approach for predicting material processing defects , 2001 .

[207]  Mark Jolly,et al.  Finite element modelling investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part II. Effect of pocket geometry configurations on metal flow , 2003 .

[208]  Jue Zhong,et al.  Influence of roll geometry and strip width on flattening in flat rolling , 1996 .

[209]  Beom-Soo Kang,et al.  Finite-element analysis and design in the combined precision forming of bending and coining with experimental measurement , 1999 .

[210]  Seon-Bong Lee,et al.  Prediction of Welding Pressure in the Non Steady state Porthole Die Extrusion of AI7003 Tubes , 2002 .

[211]  Tung-Sheng Yang Full film lubrication of deep drawing , 1999 .

[212]  Manuel Elices,et al.  Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction , 2004 .

[213]  Raghavan Srinivasan,et al.  Computer simulation of the equichannel angular extrusion (ECAE) process , 2001 .

[214]  G. Brethenoux,et al.  Cold forming processes: some examples of predictions and design optimization using numerical simulations , 1996 .

[215]  Terry Sheppard,et al.  Temperature changes occurring during extrusion of metals: Comparison of bulk, numerical, and integral profile predictions with experimental data , 1999 .

[216]  Laurent Dubar,et al.  Numerical identification of coating bulk behaviour in metal forming , 2001 .

[217]  Kaveh A. Tagavi,et al.  Analysis of interfacial slip in cross-wedge rolling: a numerical and phenomenological investigation , 2000 .

[218]  Terry Sheppard,et al.  Simulation of multi-hole die extrusion , 2004 .

[219]  John G. Lenard,et al.  The temperature, roll force and roll torque during hot bar rolling , 1999 .

[220]  Yasuo Marumo,et al.  Influence of the roughness geometry of tool surface and the flow stress of coated solid lubricants on tribo-conditions in cold forging , 2003 .

[221]  Ulf Ståhlberg,et al.  An alternative way for evaluating the deformation of MnS inclusions in hot rolling of steel , 2002 .

[222]  Damir Vučina,et al.  Flow formulation FE metal-forming analysis with boundary friction via a penalty function , 1996 .

[223]  Fabrizio Micari,et al.  Prediction of Ductile Fractures Occurrence in Deep Drawing of Square Boxes , 1996 .

[224]  J. H. Lee,et al.  Investigation on the variation of deep drawability of STS304 using FEM simulations , 2005 .

[225]  J. Huetink,et al.  A mixed elastoplastic / rigid-plastic material model , 1999 .

[226]  T. Ishikawa,et al.  Modeling approach to estimate the elastic characteristics of workpiece and shrink-fitted die for cold forging , 2004 .

[227]  J. Lagergren Double normal pressure peaks in flat rolling , 1998 .

[228]  You-Min Huang,et al.  Influence of lubricant on limitation of formability of cylindrical cup-drawing , 1997 .

[229]  Morten Rikard Jensen,et al.  Analysis of Hydromechanical Deep Drawing of Cylindrical Cups , 2000 .

[230]  Kyu Hwan Oh,et al.  Analysis of heat transfer in hot rolled coils for optimum condition of forced cooling , 1999 .

[231]  Cecil Armstrong,et al.  Die shape optimisation in forging of aerofoil sections , 2001 .

[232]  Rong-Shean Lee,et al.  Cold forging process design based on the induction of analytical knowledge , 1997 .

[233]  Reiner Kopp,et al.  Design and production of thin and small micro strips , 2003 .

[234]  Viggo Tvergaard,et al.  3D Analysis of cold rolling using a constitutive model for interface friction , 2004 .

[235]  Chun-Yin Wu,et al.  Optimal Shape Design of an Extrusion Die Using Polynomial Networks and Genetic Algorithms , 2002 .

[236]  Michał Kleiber,et al.  Sensitivity of forming processes to shape parameters , 1996 .

[237]  Jianguo Lin,et al.  Modelling of microstructural evolution in multipass hot rolling , 2003 .

[238]  Genji Wang,et al.  Coupled deformation and temperature analysis of strip rolling with a local perturbation of deformation using a 3D rigid-plastic FEM , 2004 .

[239]  F Galvez,et al.  Strain rate effect in high-speed wire drawing process , 2002 .

[240]  Jonas Hallström Influence of friction on die filling in counterblow hammer forging , 2000 .

[241]  Morten Rikard Jensen,et al.  Applying the finite-element method for determination of tool wear in conventional deep-drawing , 1998 .

[242]  J. N. Majerus,et al.  Quantitative data for precision, closed-die, forging : Internal deformations and computer simulations , 1997 .

[243]  Morten Eriksen The influence of die geometry on tool wear in deep drawing , 1997 .

[244]  Jean-Loup Chenot,et al.  OPTIMAL DESIGN FOR NON‐STEADY‐STATE METAL FORMING PROCESSES—I. SHAPE OPTIMIZATION METHOD , 1996 .

[245]  Byung-Min Kim,et al.  Finite element analysis for the wear of Ti–N coated punch in the piercing process , 2002 .

[246]  Daniel A. Tortorelli,et al.  Design of large-deformation steady elastoplastic manufacturing processes. Part II: Sensitivity analysis and optimization , 2000 .

[247]  Albert Van Bael,et al.  FEM-Aided Taylor Simulations of Radial Texture Gradient in Wire Drawing , 2002 .

[248]  Anh Kiet Tieu,et al.  A simulation of three-dimensional metal rolling processes by rigid–plastic finite element method , 2001 .

[249]  Hartmut Pawelski Measuring the friction coefficient in the case of plastification of metals by elastomers , 1998 .

[250]  Ampere A. Tseng,et al.  Local Variations of Strain and Strain Rate in Roll Bite Region During Rolling of Steels , 1998 .

[251]  Li Shuhui,et al.  An improved equivalent drawbead model and its application , 2002 .

[252]  Eung-suk Lee,et al.  A study on the chemical mechanical micro-machining (C3M) process and its application , 2002 .

[253]  Kazunari Yoshida,et al.  Effects of back tension and drawing direction on wire properties in copper wiredrawing , 2002 .

[254]  I. Pillinger,et al.  Finite-Element Plasticity and Metalforming Analysis , 1991 .

[255]  Peter Frederic Thomson,et al.  The effect of through-thickness strain distribution on the static recrystallization of hot rolled austenitic stainless steel strip , 1996 .

[256]  Jong-jin Park,et al.  Prediction of the flow stress and grain size of steel during thick-plate rolling , 2001 .

[257]  Piotr Lacki,et al.  The effect of hardening layers and technological lubricants on heat exchange between workpiece and die , 1999 .

[258]  Kozo Osakada,et al.  Finite element analysis of liquid ejection in continuously cast slab by sequential forging , 1998 .

[259]  Roumen Iankov,et al.  Finite element simulation of profile rolling of wire , 2003 .

[260]  R. Fuentes,et al.  Computer simulation of the thermal behaviour of a work roll during hot rolling of steel strip , 2004 .

[261]  Jun Yanagimoto,et al.  Analytical and experimental investigations into microstructure evolution in hot bar stretching , 2001 .

[262]  Hasan Sofuoglu,et al.  Physical and numerical analysis of three dimensional extrusion process , 2004 .

[263]  Siamak Serajzadeh,et al.  Prediction of Flow Behavior during Warm Working , 2004 .

[264]  Maciej Pietrzyk,et al.  Finite-element simulation of large plastic deformation , 2000 .

[265]  J. Huetink,et al.  Improvement of implicit finite element code performance in deep drawing simulations by dynamics contributions , 2003 .

[266]  Julian H. Driver,et al.  Modelling Hot Deformation and Textures of Aluminium Alloys , 2000 .

[267]  Terry Sheppard,et al.  Influence of forming parameters on static recrystallization behaviour during hot rolling aluminium alloy 5083 , 2002 .

[268]  Niels Bay,et al.  Limits of Lubrication in Backward Can Extrusion: Analysis by the finite-element method and physical modelling experiments , 1996 .

[269]  P. M. Dixit,et al.  Residual stresses in cold axisymmetric forging , 2003 .

[270]  Dong-Yol Yang,et al.  A three‐dimensional finite element analysis of hot extrusion through square dies , 1997 .

[271]  Albert Van Bael,et al.  Influence of texture evolution on finite element simulation of forming processes , 1999 .

[272]  Manabu Gotoh,et al.  A fundamental study of can forming by the stretch-drawing process , 2003 .

[273]  John H. Beynon,et al.  Improvement of surface finish in steel hot rolling by optimal cooling ahead of entry into the roll gap: numerical analysis , 2004 .

[274]  Lionel Fourment,et al.  Shape optimization of axisymmetric preform tools in forging using a direct differentiation method , 2001 .

[275]  A. Kiet Tieu,et al.  Modelling of Friction Variation in Slab Edging with a Finite Element Approach , 2002 .

[276]  Henryk Dyja,et al.  Strain rate in the wire drawing process , 2004 .

[277]  J Jeroen Mennink Cross-sectional stability of aluminium extrusions : prediction of the actual local buckling behaviour , 2002 .

[278]  D. M. Maijer,et al.  Mathematical model of deformation and microstructural evolution during hot rolling of aluminium alloy 5083 , 2003 .

[279]  J. Huetink,et al.  3D FEM simulation of stationary metal forming processes with applications to slitting and rolling , 2004 .

[280]  A. Nilsson,et al.  Analysis of tracking problems, camber and wedge in hot strip rolling , 1999 .

[281]  Yi Qin,et al.  Analysis, evaluation and compensation of component-errors in the nett-forming of engineering components , 2000 .

[282]  D.C.J. Farrugia,et al.  A viscoplastic constitutive model to represent the material behaviour during hot rolling of steel , 1999 .

[283]  K. S. Sivakumaran and Nabil Abdel-Rahman Experimental Evaluation Of The Material PropertiesFor Finite Element Analysis OfCold-Formed Steel Sections , 1970 .

[284]  Terry Sheppard,et al.  Prediction of Static Recrystallisation after Extrusion of Shaped Aluminium Sections , 2004 .

[285]  Luís Menezes,et al.  Reverse Deep Drawing: Experimental and Numerical Simulation Results , 2002 .

[286]  Jong-Taek Yeom,et al.  Characterization of deformation stability in hot forging of conventional Ti–6Al–4V using processing maps , 2002 .

[287]  Siamak Serajzadeh,et al.  Prediction of temperature distribution and phase transformation on the run-out table in the process of hot strip rolling , 2003 .

[288]  A. Hacquin,et al.  A steady state thermo-elastoviscoplastic finite element model of rolling with coupled thermo-elastic roll deformation , 1996 .

[289]  E. Doege,et al.  Product Development Support for Suppliers of Forgings , 1999 .

[290]  Jean-Loup Chenot,et al.  Mechanical, thermal and physical coupling methods in FE analysis of metal forming processes , 1996 .

[291]  James A. Nemes,et al.  Influence of strain distribution on microstructure evolution during rod-rolling , 1999 .

[292]  Tei-Chen Chen,et al.  Evaluation of the preform design of a stepped forging part by coupled thermoviscoplastic finite-element analysis and visioplasticity , 1996 .

[293]  Dimitrios E. Manolakos,et al.  Finite-element simulation of axisymmetric preforms in precision forging at elevated temperatures , 1996 .

[294]  Sang Min Byon,et al.  Prediction of Flow Stress and Microstructural Evolution during Hot Forging of Three Microalloyed Medium Carbon Steels , 2005 .

[295]  Zuyan Y. Liu,et al.  Finite element simulation of the stress distribution of equal-cross section lateral extrusion , 1999 .

[296]  Zlatko Kampuš Analysis of factors influencing accuracy in the drawing of round rods , 1999 .

[297]  J. Talamantes-Silva,et al.  Modeling of aluminum rolling using finite elements and gray-box modeling technique , 2002, Proceedings of the IEEE Internatinal Symposium on Intelligent Control.

[298]  Andrzej Gontarz,et al.  Analysis of the drop forging of a piston using Slip-Line Fields and FEM , 1997 .

[299]  Hyoung Jin Choi,et al.  Material Flow Characteristics on the Forward and Backward Solid Extrusion Process , 2005 .

[300]  K. Johnson,et al.  Transfer of material between rolling and sliding surfaces , 2004 .

[301]  Emory W. Zimmers,et al.  Application of fem-based modeling of open-die forging to product and process development at Bethforge, Inc. , 1997 .

[302]  Zisu Zhao,et al.  A Texture Component Crystal Plasticity Finite Element Method for Physically-Based Metal Forming Simulations Including Texture Update , 2002 .

[303]  A. Molinari,et al.  Modeling of rolling texture development in a ferritic chromium steel , 1997 .

[304]  YonglinKang,et al.  Two-dimensional simulation on the rolling process of semi-solid 60Si2Mn by finite element method , 2002 .

[305]  A. Yamanaka,et al.  Reduction of centre cavity by forging with liquid core in round billet , 1999 .

[306]  Paulo A.F. Martins,et al.  The avoidance of defects in radially extruded tubular parts by preforming , 1997 .

[307]  J. S. Gunasekera,et al.  3D flow analysis inside shear and streamlined extrusion dies for feeder plate design , 2001 .

[308]  Andrzej Milenin,et al.  Theoretical analysis and optimisation of parameters in extrusion process of explosive cladded bimetallic rods , 2004 .

[309]  Jean-Loup Chenot,et al.  Finite element modelling of hot metal forming , 1996 .

[310]  Kaveh A. Tagavi,et al.  Analysis of stress in cross wedge rolling with application to failure , 2000 .

[311]  Mohamed S. Gadala,et al.  Simulation of metal forming processes with finite element methods , 1999 .

[312]  Mahmoud Farzin,et al.  Correction of hydrostatic pressure obtained by the finite element flow formulation using moving least squares method , 2002 .

[313]  Yeong-Maw Hwang,et al.  A three-dimensional finite element analysis of the three-roll planetary mill , 2002 .

[314]  Xiaobo Liu,et al.  Stress field analysis of extra-height forging die using finite element method , 1999 .

[315]  Maryam Salimi,et al.  Modified slab analysis of asymmetrical plate rolling , 2002 .

[316]  Kamineni Pitcheswara Rao,et al.  A study on hot extrusion of Ti–6Al–4V using simulations and experiments , 2002 .

[317]  学 後藤,et al.  多段鍛造工程の数値シミュレーション : 第1報, プログラムの開発及び実験検証 , 1996 .

[318]  Shiro Kobayashi,et al.  Metal forming and the finite-element method , 1989 .

[319]  M. Poursina,et al.  Preform optimal design in metal forging using genetic algorithms , 2004 .

[320]  Jie Zhou,et al.  Prediction of temperature evolution during the extrusion of 7075 aluminium alloy at various ram speeds by means of 3D FEM simulation , 2004 .

[321]  Su-Hai Hsiang,et al.  Application of finite element method and artificial neural network to the die design of radial forging processes , 2004 .

[322]  J. H. Park,et al.  Upper bound analysis of torsional backward extrusion process , 2003 .

[323]  Zone-Ching Lin,et al.  A study of radial thermal expansion of a work roll for three-dimensional strip deformation during rolling , 1997 .

[324]  R. M. Natal Jorge,et al.  Numerical modelling of ductile plastic damage in bulk metal forming , 2003 .

[325]  Arno Behrens,et al.  Theoretical and Experimental Damage Prediction in Cold and Semi-Hot Bulk Forming of Ductile Steels , 2005 .

[326]  H. B. Shim,et al.  Optimal Blank Design for the Drawings of Arbitrary Shapes by the Sensitivity Method , 2000, Manufacturing Engineering.

[327]  Knut Marthinsen,et al.  Coupled FEM and Microstructure Modeling Applied to Rolling and Extrusion of Aluminium Alloys , 2003 .

[328]  N. Venkata Reddy,et al.  Upper-bound and finite-element analysis of axisymmetric hot extrusion , 1996 .

[329]  C. Luis-Pérez,et al.  Finite element modelling of an Al–Mn alloy by equal channel angular extrusion (ECAE) , 2004 .

[330]  Xianghua Liu,et al.  Simulation of vertical-horizontal rolling process during width reduction by full three-dimensional rigid-plastic finite element method , 1997 .

[331]  Lang Li Numerical simulation of cup hydrodynamic deep drawing , 2000 .

[332]  A. W. Lees,et al.  Investigations into the influence of asymmetric factors and rolling parameters on strip curvature during hot rolling , 2003 .

[333]  Eckart Doege,et al.  Influence of friction on the material flow during precision forging of helical gears , 1998 .

[334]  M. Geiger,et al.  Finite Element Simulation of Deep Drawing of Tailored Heat Treated Blanks , 2004 .

[335]  Su-Hai Hsiang,et al.  Investigation of the influence of various process parameters on the radial forging processes by the finite element method (FEM) , 2004 .

[336]  Zheng Y Jiang,et al.  Analysis of ribbed-strip rolling by rigid-viscoplastic FEM , 2000 .

[337]  Taylan Altan,et al.  Tooling and process design to cold forge a cross groove inner race for a constant velocity joint — physical modeling and FEM process simulation , 1996 .

[338]  Laurent Dubar,et al.  Asperity deformation, lubricant trapping and iron fines formation mechanism in cold rolling processes , 2004 .

[339]  Laszlo S. Toth,et al.  Texture Evolution in Severe Plastic Deformation by Equal Channel Angular Extrusion , 2003 .

[340]  M. A. Ghouali,et al.  Local analytical design sensitivity analysis of the forging problem using FEM , 1998 .

[341]  He Yang,et al.  A 3D rigid–viscoplastic FEM simulation of the isothermal precision forging of a blade with a damper platform , 2002 .

[342]  Kazutake Komori Proposal and use of a void model for the simulation of ductile fracture behavior , 1999 .

[343]  Dong-Yol Yang,et al.  Mismatching refinement with domain decomposition for the analysis of steady‐state metal forming process , 2000 .

[344]  Eduardo N. Dvorkin,et al.  2D finite element parametric studies of the flat-rolling process , 1997 .

[345]  M. Knapiński,et al.  FEM 3D Analysis of Roll Deflection During Plate Rolling , 2005 .

[346]  F. Fereshteh-Saniee,et al.  A comparative estimation of the forming load in the deep drawing process , 2003 .

[347]  Morten Rikard Jensen,et al.  Effect of anisotropy and prebulging on hydromechanical deep drawing of mild steel cups , 2003 .

[348]  G. Ngaile,et al.  Cold forging tribo-test based on variation of deformation patterns at the tool-workpiece interface , 1999 .

[349]  Sumitesh Das,et al.  Effect of friction on deformation during rolling as revealed by embedded pin technique , 2001 .

[350]  Keun Park,et al.  Precision forging design and analysis in electronics part manufacturing , 1999 .

[351]  Rajendram Balendra,et al.  Extrusion die for in-process compensation of component-errors due to die-elasticity , 1997 .

[352]  Jia Feng,et al.  A method for the optimal control of forging process variables using the finite element method and control theory , 2000 .

[353]  Dariusz Rydz,et al.  The optimal conditions for production of bimetallic plate St36K + 0H13J in asymmetrical hot rolling , 2004 .

[354]  S. J. Hardy,et al.  Finite element modelling of camber development during hot rolling of strip steel , 1998 .

[355]  Kazutake Komori Simulation of deformation and temperature in caliber rolling : effect of finite-element mesh in cross-section , 2003 .

[356]  Yi Qin,et al.  Injection forging: engineering and research , 2004 .

[357]  S. K. Maiti,et al.  Sensitivity analysis of a deep drawing process for miniaturized products , 2004 .

[358]  Byeong-Woo Kim,et al.  Finite element analysis of the combined extrusion of semi-solid material and its experimental verification , 2000 .

[359]  Dong-Yol Yang,et al.  A new method of preform design in hot forging by using electric field theory , 2002 .

[360]  Man-Soo Joun,et al.  Finite element analysis of prestressed die set in cold forging , 2002 .

[361]  Kazunari Yoshida,et al.  Influence of flaws of wire rod surface, inclusions and voids on wire breaks in superfine wire drawing , 2003 .

[362]  Hyun Seon Hong,et al.  FEM Analysis of Hot Forging Process for an Automotive Lower-Arm Connector , 2003 .

[363]  Andrzej Milenin,et al.  MATHEMATICAL MODELING OF THE SPREAD OF METALS WITH DIFFERENT RHEOLOGICAL PROPERTIES ON ROLLING , 1998 .

[364]  Zhengyi Jiang,et al.  A FEM modelling of the elastic deformation zones in flat rolling , 2004 .

[365]  Ampere A. Tseng,et al.  Effects of interface resistance on heat transfer in steel cold rolling , 1996 .

[366]  Seong-Hwan Park,et al.  A study on the improvement of formability for elliptical deep drawing processes , 2001 .

[367]  Byeong-Woo Kim,et al.  Prediction of die wear in the wire-drawing process , 1997 .

[368]  Siamak Serajzadeh,et al.  Prediction of dynamic recrystallization kinetics during hot rolling , 2004 .

[369]  Keun Park,et al.  Three‐dimensional finite element analysis for hollow section extrusion of a triply‐connected section using mismatching refinement with domain decomposition , 2000 .

[370]  Jun Yanagimoto,et al.  Incremental formulation for the prediction of microstructural change in multi-pass hot forming , 1999 .

[371]  Jean-Loup Chenot,et al.  An application of a master-slave algorithm for solving 3D contact problems between deformable bodies in forming processes , 2001 .

[372]  Reiner Kopp,et al.  Designing hot working processes of nickel-based superalloys using finite element simulation , 2002 .

[373]  Ramana V. Grandhi,et al.  Sensitivity analysis based preform die shape design using the finite element method , 1997 .

[374]  Niels Bay,et al.  Physical modelling and numerical simulation of the round-to-square forward extrusion , 2001 .

[375]  Conny Eriksson Surface Cracks in Wire Rod Rolling , 2004 .

[376]  Wolfgang Sauer Thermal camber model for hot and cold rolling , 1996 .

[377]  Rong-Shean Lee,et al.  Process design based on the deformation mechanism for the non-isothermal forging of Ti-6Al-4V alloy , 1998 .

[378]  Tze-Chi Hsu,et al.  A Mixed Lubrication Model for Computer Simulation of Extrusion Processes , 2000 .

[379]  T. Kuboki,et al.  Optimisation of method for reducing residual stresses after cold bar drawing , 2002 .

[380]  John H. Beynon,et al.  The tensile failure of mild steel oxides under hot rolling conditions , 1999 .

[381]  Annika Nilsson,et al.  Front-end bending in plate rolling , 2001 .

[382]  Tae-Hoon Choi,et al.  Application of intelligent design support system for multi-step deep drawing process , 2002 .

[383]  A. V. Nagasekhar,et al.  Optimal tool angles for equal channel angular extrusion of strain hardening materials by finite element analysis , 2004 .

[384]  Zone-Ching Lin,et al.  Application of an Elastic Roller with Slightly Convex Shape to the Improvement of the Flatness of a Strip for Cold Rolling. , 1997 .

[385]  Jun Yanagimoto,et al.  The Analysis of Phase Transformation for the Prediction of Microstructure Change after Hot Forming , 2001 .

[386]  Satish S. Udpa,et al.  Numerical modeling and experimental study of motion-induced remote field current effect and its applications to online inspection and quality examination of rolling metallic strips , 2000, Smart Structures.

[387]  Sutasn Thipprakmas,et al.  Simulation of ultrasonic-vibration drawing using the finite element method (FEM) , 2003 .

[388]  H. Li,et al.  Vacuum-free diffusion bonding of aluminium metal matrix composite , 1999 .

[389]  S. Y Lin,et al.  Elimination of fold defects in the radial extrusion of tubular components using an elastic support ring , 2003 .

[390]  Zone-Ching Lin,et al.  Different degree of reduction and sliding phenomenon study for three-dimensional hot rolling with sandwich flat strip , 2000 .

[391]  C. Counhaye,et al.  Application des lois de comportement élasto-plastiques discrétisées au skin-pass et au laminage , 1998 .

[392]  S. Thiruvarudchelvan,et al.  Investigations into the hydraulic-pressure augmented deep drawing process , 2000 .

[393]  Zhengyi Jiang,et al.  Modelling of Rolling of Strips with Longitudinal Ribs by 3-D Rigid Visco-plastic Finite Element Method , 2000 .

[394]  Andrzej Gontarz,et al.  Head forging aspects of new forming process of screw spike , 2004 .

[395]  Magne S. Espedal,et al.  On the numerical solution of a three dimensional extrusion model , 1997 .

[396]  Kyu Hwan Oh,et al.  Finite Element Analysis of Hot Rolled Coil Cooling , 1998 .

[397]  Terry Sheppard,et al.  Influence of forming parameters on the final subgrain size during hot rolling of aluminium alloys , 2002 .

[398]  Matthew P. Miller,et al.  Representing the Effect of Crystallographic Texture on the Anisotropic Performance Behavior of Rolled Aluminum Plate , 2000 .

[399]  K. Kawakami,et al.  DETERMINATION OF HOT SIZING CONDITIONS FOR BAR ROLLING TO SUPPRESS THE GRAIN COARSENING PHENOMENON , 1998 .

[400]  Andrzej Służalec,et al.  Simulation of stochastic metal-forming process for rigid-viscoplastic material , 2000 .

[401]  Mohammad Reza Forouzan,et al.  Determination of bending actuators set points to control crown and flatness in hot rolling of strip , 2002 .

[402]  Mpf Sutcliffe,et al.  The effect of surface deformation on lubrication and oxide-scale fracture in cold metal rolling , 2004 .

[403]  Franz Dieter Fischer,et al.  Residual stress formation during the roller straightening of railway rails , 2001 .

[404]  H. Dyja,et al.  Asymmetry of the roll gap as a factor improving work of the hydraulic gauge control in the plate rolling mill , 1996 .

[405]  Hyungjun Kim,et al.  Analytic model for the prediction of mean effective strain in rod rolling process , 2001 .

[406]  Ken-ichiro Mori,et al.  Prediction of coiling conditions of plate in coilbox by controlled FEM simulation , 1999 .

[407]  John H. Beynon,et al.  Effect of steel composition on failure of oxide scales in tension under hot rolling conditions , 2001 .

[408]  Mark Hadfield,et al.  Failure of silicon nitride rolling elements with ring crack defects , 1998 .

[409]  Jordan M. Berg,et al.  Neural-network feedback control of an extrusion , 1998, IEEE Trans. Control. Syst. Technol..

[410]  Mohammad Reza Forouzan,et al.  Guide roll simulation in FE analysis of ring rolling , 2003 .

[411]  E. Doege,et al.  Some models and problems for laminar and turbulent flows of viscous and nonlinear viscous fluids , 1996 .

[412]  Shunxin Zhou,et al.  Slow Hot Rolling in Direct Linkage with Thin Slab and Strip Continuous Casting: Effect on the Evolution of Austenite Grain , 2003 .

[413]  R José Montecinos,et al.  An investigation into the rolling process of copper tubes , 1999 .

[414]  Rita G. Toscano,et al.  Finite element models in the steel industry: Part II: Analyses of tubular products performance , 2003 .

[415]  S. Kuriyama,et al.  Development of simulation code for calculating residual stress distribution in D-I cans produced by both-sided ironing process , 2003 .

[416]  H. J. Antunez,et al.  Linear elements for metal-forming problems within the flow approach , 2000 .

[417]  J. Mackerle Finite element analyses and simulations of sheet metal forming processes , 2004 .

[418]  Fpt Frank Baaijens,et al.  Modelling friction near sharp edges using a Eulerian reference frame: application to aluminium extrusion , 2002 .

[419]  Young Hoon Moon,et al.  Validation via FEM and plasticine modeling of upper bound criteria of a process-induced side-surface defect in forgings , 2000 .

[420]  Andreas Obereder,et al.  Numerical analysis of a new Eulerian–Lagrangian finite element method applied to steady-state hot rolling processes , 2005 .

[421]  L. Chen,et al.  Finite element polycrystal model simulation of cold rolling textures in deformation processed two-phase Nb/Al metal-metal composites , 2005 .

[422]  Yong-Taek Im,et al.  Fuzzy control algorithm for the prediction of tension variations in hot rolling , 1999 .

[423]  Zhengyi Jiang,et al.  A method to analyse the rolling of strip with ribs by 3D rigid visco-plastic finite element method , 2001 .

[424]  Yong Nam Kwon,et al.  Effects of Material Properties on Elastic Characteristics of Cold Forged Part , 2004 .

[425]  P. Lestriez,et al.  Numerical prediction of discontinuous central bursting in axisymmetric forward extrusion by continuum damage mechanics , 2004 .

[426]  Pasquale Cavaliere,et al.  Isothermal forging modelling of 2618 + 20% Al2O3p metal matrix composite , 2004 .

[427]  Naksoo Kim,et al.  Prediction of spread, pressure distribution and roll force in ring rolling process using rigid–plastic finite element method , 2003 .

[428]  Y. You,et al.  Calculation of drawbead restraining forces with the Bauschinger effect , 1998 .

[429]  O. Hopperstad,et al.  Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity , 1999 .

[430]  Takashi Kuboki,et al.  Die design by a void index in multi-pass drawing , 2002 .

[431]  Johan Moverare,et al.  Influence of elastic and plastic anisotropy on the flow behavior in a duplex stainless steel , 2002 .

[432]  Knut Marthinsen,et al.  Industrial Verification of Microstructural Models for Thermomechanical Processing by Application to Hot Rolling of AA3104 , 2000 .

[433]  Doriana M. D’Addona,et al.  An Intelligent Computation Approach to Process Planning in Multiple-Step Cold Forging , 1999 .

[434]  H. S. Jeong,et al.  CONFORM process: surface separation, curling and process characteristics to the wheel diameter , 2003 .

[435]  Shin-ichi Matsuoka,et al.  Effects of die structure on change of sectional dimensions in extrusion of aluminum alloys , 2004 .

[436]  J Tajima,et al.  Optimization of open-die forging process design to ensure homogeneous grain size refinement of cast structures by three-dimensional rigid-plastic finite element analysis , 2004 .

[437]  Robert H. Wagoner,et al.  Metal Forming Analysis , 2001 .

[438]  E. I. Panov Stress-Strain State of a Semifinished Product During Helical Rolling: Axial Stresses , 2004 .

[439]  Yeong-Maw Hwang,et al.  Study of Hydrostatic Extrusion Processes with Extra-High Extrusion Ratio , 2002 .

[440]  John F. Humphreys,et al.  Lattice Rotations at Large Second-Phase Particles in Polycrystalline Aluminium , 2003 .

[441]  M. H. Jacobs,et al.  Coupled thermo-mechanical finite-element modelling of hot ring rolling process , 2002 .

[442]  Geun An Lee,et al.  Forming Technology for Cold Forging Processes of Ball Stud Using Non-Heat-Treated Cold Forging Materials , 2005 .

[443]  Yi Qin,et al.  Optimisation of the lubrication for the extrusion of solid and tubular components by injection forging , 2003 .

[444]  Yi Qin,et al.  A new approach for the optimisation of the shrink-fitting of cold-forging dies , 2004 .

[445]  Alf Samuelsson,et al.  Solution of quasi‐static, force‐driven problems by means of a dynamic‐explicit approach and an adaptive loading procedure , 1996 .

[446]  C. Xie,et al.  Rigid–viscoplastic dynamic explicit FEA of the ring rolling process , 2000 .

[447]  A. Hacquin,et al.  New-generation crown and flatness set-up model for hot mills , 2002 .

[448]  Alf Samuelsson,et al.  Implicit solid, flow and flow–solid finite element approaches in blade forging simulation , 2003 .

[449]  K. Osakada,et al.  Inclusion of elastic deformation in rigid-plastic finite element analysis , 1996 .

[450]  S.M.H. Mirbagheri,et al.  Modelling of metal flow during hot forging with regard to microstructural aspects , 2004 .

[451]  Paulo A.F. Martins,et al.  Steady-state finite-element analysis of cold forward extrusion , 1998 .

[452]  Luigi Maria Galantucci,et al.  Design of process parameters for dual phase steel production with strip rolling using the finite-element method , 1999 .

[453]  YongqiangKang,et al.  Metal deformation in skew rolling step-shaft , 2003 .

[454]  Chinghua Hung,et al.  A study on seamless tube in the planetary rolling process , 2002 .

[455]  G. J. Creus,et al.  Simulation of 3D metal-forming using an arbitrary Lagrangian–Eulerian finite element method , 2001 .

[456]  Pierre Montmitonnet,et al.  Numerical modelling of lubricated foil rolling , 2001 .

[457]  Eduardo N. Dvorkin,et al.  Finite element models in the steel industry: Part I: Simulation of flat product manufacturing processes , 2003 .

[458]  Jun Yanagimoto,et al.  Automated sequence design for slab stretching with arbitrary height distribution using one-step FEM analysis , 2004 .

[459]  Tatsuo Ozaki,et al.  Finish Rolling of Sintered Fe Alloy Gears Using Screw-Shaped Tool (2nd Report, Numerical Tooth Profile Analysis Using Elasto-Plastic Finite Element Method) , 2005 .

[460]  Jie Zhang,et al.  Modelling the distortion of long product sections after hot rolling using finite elements and neural networks , 2004 .

[461]  Ramana V. Grandhi,et al.  Sensitivity analysis based preform die shape design for net-shape forging , 1997 .

[462]  Ust Beijing Deformation and Stress Fields of Non-circular Tubes in Roll Forming Process , 1999 .

[463]  Alf Samuelsson,et al.  Implicit and dynamic explicit solutions of blade forging using the finite element method , 1994 .

[464]  Lehua Qi,et al.  Simulation of liquid infiltration and semi-solid extrusion for composite tubes by quasi-coupling thermal-mechanical finite element method , 2003 .

[465]  Surya R. Kalidindi,et al.  A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion , 2005 .

[466]  S. G. Xu,et al.  Simulation of the Hot Ring Rolling Process by Using a Thermo-Coupled Three-Dimensional Rigid-Viscoplastic Finite Element Method , 1997 .

[467]  T A Dean,et al.  The interfacial heat transfer coefficient in hot die forging of titanium alloy , 1998 .

[468]  Shizhong Su Prediction of plastic anisotropy in aluminium extruded tubes by finite element polycrystal model , 2001 .

[469]  Siamak Serajzadeh,et al.  Modelling the temperature distribution and microstructural changes during hot rod rolling of a low carbon steel , 2002 .

[470]  Cy Park,et al.  A study of void crushing in large forgings: II. Estimation of bonding efficiency by finite-element analysis , 1997 .

[471]  Zone-Ching Lin,et al.  Hot rolling of an aluminum–copper sandwich flat strip with the three-dimensional finite element method , 2000 .

[472]  Ilija Mamuzić,et al.  Analysis of Plastic Flow of Hot Metal by Rolling with Figured Passes , 1997 .

[473]  W. B. Bae,et al.  A study on the development of large aluminum flange using the casting/forging process , 2002 .

[474]  A. E. Tekkaya,et al.  Service life estimation of extrusion dies by numerical simulation of fatigue-crack-growth , 1996 .

[475]  Sang-Moon Hwang,et al.  Process design and blank modification in the multistage rectangular deep drawing of an extreme aspect ratio , 2004 .

[476]  Hao Nan Die land optimization of section extrusion by finite element method , 2001 .

[477]  Jean-Philippe Ponthot,et al.  Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian–Eulerian formulation , 2004 .

[478]  Shamsuddin Sulaiman,et al.  Development of a CAD/CAM system for the closed-die forging process , 2003 .

[479]  Rajeev Baskiyar Finite Element Method Simulation of the Cooling of Hot-Rolled Steel Rods , 2004 .

[480]  Zenon Mróz,et al.  Constitutive model of adhesive and ploughing friction in metal-forming processes , 1998 .

[481]  P. S. Bate,et al.  Increasing the drawability of AA2014 Al-Cu by differential heat treatment , 1998 .

[482]  Seung Il Seo,et al.  A Study on the Application of Large Aluminum Hollow Extrusion Profiles to Ship Structures , 1999 .

[483]  Antoinette M. Maniatty,et al.  Shape Sensitivity Analysis for Steady Metal-Forming Processes , 1996 .

[484]  R. Sauer,et al.  Tafeln der Torsionskenngrößen von Walzprofilen unter Verwendung von FE‐Diskretisierungen , 1999 .

[485]  Tze-Chi Hsu,et al.  The friction modeling of different tribological interfaces in extrusion process , 2003 .

[486]  Terry Sheppard,et al.  Individual influence of forming parameters on surface recrystallization during aluminium extrusion , 2004 .

[487]  Marek Bijak-Żochowski,et al.  Residual stress in some elasto-plastic problems of rolling contact with friction , 1997 .

[488]  D. R. Kumar,et al.  Optimization of initial blank shape to minimize earing in deep drawing using finite element method , 2002 .

[489]  Dong Nyung Lee,et al.  Effects of Shear Strain and Drawing Pass on the Texture Development in Copper Wire , 2002 .

[490]  Su-Hai Hsiang,et al.  An Investigation of the Process Parameters for Calibre Rolling Using a Complex Analytical Model , 2002 .

[491]  E. Doege,et al.  Adaptiver 3D-Vernetzungsalgorithmus zur FEM-Analyse von Massivumformvorgängen , 1998 .

[492]  Sven-Erik Lundberg,et al.  Finite Element Modelling and Laboratory Simulation of High Speed Wire Rod Rolling in 3‐Roll Stands , 2003 .

[493]  Julian H. Driver,et al.  A Viscoplastic Simulation of Texture Evolution during Extrusion of an Aluminium Alloy , 1998 .

[494]  Zhenlong Wang,et al.  Numerical and experimental research of the cold upsetting–extruding of tube flanges , 2001 .

[495]  Steven R. Schmid,et al.  Advanced simulations for hot forging: heat transfer model for use with the finite element method , 2004 .

[496]  Karl Kuzman,et al.  Sensitivity and stability evaluation of the deep drawing process , 2002 .

[497]  R. Radev,et al.  Numerical simulations of hot die forging processes using finite element method , 2004 .

[498]  Man-Soo Joun,et al.  An axisymmetric forging approach to preform design in ring rolling using a rigid-viscoplastic finite element method , 1998 .

[499]  Han Han,et al.  Determination of mean flow stress and friction coefficient by the modified two-specimen method in cold rolling , 2005 .

[500]  J Oudin,et al.  Identification of the bulk behavior in the near-contact-surface of steel workpieces , 1996 .

[501]  M. Meidert,et al.  Net shape cold forging to close tolerances under QS 9000 aspects , 2000 .

[502]  Hugh Shercliff,et al.  Microstructural modelling in metals processing , 2002 .

[503]  Terry Sheppard,et al.  Modelling of static recrystallisation by combining FEM with empirical models , 2002 .

[504]  G. T. Hahn,et al.  The Effect of Dent Size on the Pressure Distribution and Failure Location in Dry Point Frictionless Rolling Contacts , 2004 .

[505]  Manuel Elices,et al.  Influence of residual stresses on hydrogen embrittlement of cold drawn wires , 2004 .

[506]  Feng Feng,et al.  A parametric study of process parameters in external thread rolling , 2002 .

[507]  A. Al-Samhan,et al.  The computer simulation of cold-roll-forming using FE methods and applied real time re-meshing techniques , 2003 .

[508]  R.J.J.M. Sniekers,et al.  Experimental set-up and data processing of the radial strip-drawing friction test , 1997 .

[509]  Y. Choi,et al.  A design method for cold backward extrusion using FE analysis , 2003 .

[510]  Hao Zhuan Lin,et al.  Finite Element Simulation of Canned Forging on TiAl Alloy Containing High Nb , 2005 .

[511]  Kozo Osakada,et al.  Development of Warm Forging Method for Magnesium Alloy , 2004 .

[512]  Zhong-jin Wang,et al.  Applications of numerical simulation to the analysis of bulk-forming processes—case studies , 2004 .

[513]  Soon Wan Chung,et al.  Computational Simulation of Localized Damage by Finite Element Remeshing based on Bubble Packing Method , 2003 .

[514]  Kenichi Ohe,et al.  Examination of Effective Factor on Curling and Curling Control in Plate Rolling , 1999 .

[515]  Dong-Yol Yang,et al.  Development of a grid‐based mesh generation technique and its application to remeshing during the finite element simulation of a metal forming process , 1999 .

[516]  Jun Yanagimoto,et al.  Metal flow in bearing section during extrusion process of L, C and T sections , 1998 .

[517]  K. Müller,et al.  Indirect Extrusion with Active Friction (ISA) , 2002 .

[518]  Zone-Ching Lin,et al.  A coupled finite element method for a three-dimensional analysis of the flat rolling of aluminum with different reductions , 2001 .

[519]  H B Shim Determination of optimal blank shape by the radius vector of boundary nodes , 2004 .

[520]  Nitin V. Hattangady,et al.  Faster analysis of forming problems through use of coarse mesh models for dies , 1999 .

[521]  Jonathan A. Dantzig,et al.  High-temperature mechanical behavior and hot rolling of AA705X , 2005 .

[522]  Zhong-jin Wang,et al.  Explanation of the mushroom effect in the rotary forging of a cylinder , 2004 .

[523]  Ampere A. Tseng,et al.  A finite element analysis of elasto-plastic contact problems in metal forming , 1998 .

[524]  J Lof,et al.  Elasto-viscoplastic FEM simulations of the aluminium flow in the bearing area for extrusion of thin-walled sections , 2001 .

[525]  N. R. Chitkara,et al.  Development of an Adaptive Directional Reduced Integration Technique and its Application to Rigid-Plastic Finite-Element Analysis of Heading and Backward Extrusion , 2002 .

[526]  Guido Berti,et al.  Experimental evaluation and FE simulation of thermal conditions at tool surface during cooling and deformation phases in hot forging operations , 2002 .

[527]  Hyoung-Seop Kim,et al.  Densification mechanisms during hot isostatic pressing of stainless steel powder compacts , 2002 .

[528]  Jun Yanagimoto,et al.  Incremental Formulation for the Prediction of Flow Stress and Microstructural Change in Hot Forming , 1998 .

[529]  Archimede Forcellese,et al.  Hot formability studies on 359/SiC/20p and their application in forging optimisation , 1996 .

[530]  T. A. Angelov,et al.  Finite-element analysis of a hot-rolling problem with nonlinear friction , 1997 .

[531]  Ioannis Doltsinis,et al.  PROCESS DESIGN AND SENSITIVITY ANALYSIS IN METAL FORMING , 1999 .

[532]  Cecil Armstrong,et al.  An FE simulation and optimisation approach for the forging of aeroengine components , 2004 .

[533]  Jue Zhong,et al.  Modification of a classical formula for determination of roll flattening in flat rolling , 1996 .

[534]  Gang Liu,et al.  Improving dimensional accuracy of a u-shaped part through an orthogonal design experiment , 2002 .

[535]  Han Huetink,et al.  Simulation of aluminium extrusion based on a finite element method (FEM) , 1996 .

[536]  R. M. Natal Jorge,et al.  A quadrilateral mesh generator for adaptive procedures in bulk forming processes , 2000 .

[537]  Joël Courbon Mechanical Metallurgy of Aluminium Alloys for the Beverage Can , 2000 .

[538]  P. Van Houtte,et al.  Residual stress determination in cold drawn steel wire by FEM simulation and X-ray diffraction , 2003 .

[539]  Yang Yuhe,et al.  2D elasto-plastic FE simulation of the drawbead drawing process , 2002 .

[540]  Y.-S. Lee An Eulerian Finite Element Analysis for the Steady State Rolling Process , 2005 .

[541]  Gang Liu,et al.  Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel , 2002 .

[542]  Yong-Taek Im A computer-aided-design system for forming processes , 1999 .

[543]  Seon Bong Lee,et al.  Process design and forming analysis of a permalloy shielding can for instrument clusters , 2003 .

[544]  Hyoung Jin Choi,et al.  Deformation Characteristics in Radially Extruded Tubular Parts , 2005 .

[545]  Youngseon Lee,et al.  Analysis of the elastic characteristics at forging die for the cold forged dimensional accuracy , 2002 .

[546]  Liu Gang Research on rotary forming mechanism of cartridge bottom by FEM , 2003 .

[547]  Kazutake Komori Simulation of Deformation and Temperature in Multipass Three-Roll Rolling. , 1996 .

[548]  Taylan Altan,et al.  Prediction of process conditions in drawing and ironing of cans , 1996 .

[549]  G.C.R. Moura,et al.  The failure analysis of a deep drawing die in the manufacturing of an automotive shock absorber cap , 2004 .

[550]  Christian Krempaszky,et al.  3-D Simulation of hot forming and microstructure evolution , 2003 .

[551]  Jong-Gye Shin,et al.  Mechanics of Die-less Asymmetric Rolling for Fabrication of Compound Curved Plates , 2003 .

[552]  Ilija Mamuzić,et al.  Finite Elements Stiffness Matrices Conditionality Improvement in the Analysis of Forming Processes via the Orthogonalizing of the Shape Functions , 1996 .

[553]  Michael A. McCarthy,et al.  The Influence of Processing and Microstructural Parameters on the Exfoliation Corrosion Susceptibility of 2025 , 2002 .

[554]  J. H. Lee,et al.  Finite element modelling approaches to the accurate dimensional prediction for a cold-forged part , 2004 .

[555]  H. Dell,et al.  A comprehensive failure model for crashworthiness simulation of aluminium extrusions , 2004 .

[556]  Yong-Taek Im,et al.  The effect of strain-hardening on frictional behavior in tip test , 2004 .

[557]  Qiang Zeng,et al.  An efficient plasticity algorithm for shell elements application to metal forming simulation , 2001 .

[558]  Y. Im,et al.  Determination of forming limit of a structural aluminum tube in rubber pad bending , 2003 .

[559]  Jang-Ping Wang,et al.  Color-image processing for the evaluation of stream-lines in plane extrusion by fuzzy set theory , 1997 .

[560]  Eric B. Shell,et al.  Cavitation and failure during hot forging of Ti-6Al-4V , 1999 .

[561]  A. W. Lees,et al.  Finite element modelling of strip curvature during hot rolling , 2002 .

[562]  N. R. Chitkara,et al.  Simulation of Upset Heading, Application of Rigid-Plastic Finite Element Analysis and some Experiments , 2002 .

[563]  Y. H. Lu,et al.  An advanced model of designing controlled strain rate dies for axisymmetric extrusion , 1999 .

[564]  H. J. McQueen,et al.  Influence of particulate reinforcements on 6061 materials in extrusion modeling , 2004 .

[565]  Terry Sheppard,et al.  Material Flow and Pressure Prediction when Extruding through Bridge Dies , 1998 .

[566]  R. B. Pęcherski,et al.  Plastic strain in metals by shear banding. II. Numerical identification and verification of plastic flow law , 2002 .

[567]  Soo-Ik Oh,et al.  Recent development and applications of three-dimensional finite element modeling in bulk forming processes , 2001 .

[568]  Mei Zhan,et al.  Influence of the shape and position of the preform in the precision forging of a compressor blade , 2002 .

[569]  Yong-Taek Im,et al.  Determination of a major design parameter for forward extrusion of spur gears , 2004 .

[570]  Chen Yu,et al.  Research on the “shear-extrusion” process to form large-scale cut-off valve bodies , 2001 .

[571]  Reiner Kopp,et al.  Integration of physically based models into FEM and application in simulation of metal forming processes , 2000 .

[572]  Zhong-qin Lin,et al.  Eliminating springback error in U-shaped part forming by variable blankholder force , 2002 .

[573]  Manabu Gotoh,et al.  A Numerical Study of Double Stage Extrusion of a Circular Bar , 2002 .

[574]  S. M. Byon,et al.  PROCESS OPTIMAL DESIGN IN NON-ISOTHERMAL, STEADY-STATE METAL FORMING BY THE FINITE ELEMENT METHOD , 1999 .

[575]  Joseph P. Domblesky,et al.  Experimental investigation of external thread rolling , 2002 .

[576]  Changhee Lee,et al.  Development of Integrated and Intelligent Design and Analysis System for Forging Processes , 2000 .

[577]  Jen Fin Lin,et al.  The effects of strain hardened layer on pitting formation during rolling contact , 2001 .

[578]  Reiner Kopp,et al.  Integrative finite element simulation of the rolling of Al alloys with coupled dislocation density and texture models , 2003, International Journal of Materials Research.

[579]  Kyu Hwan Oh,et al.  Deformation Texture of Cold Drawn Al6063 Tube , 2002 .

[580]  Ulf Ståhlberg,et al.  Deformation of inclusions during hot rolling of steels , 2001 .

[581]  Jan Kusiak,et al.  Inverse analysis applied to the evaluation of material parameters in the history dependent flow stress equation in hot forming of metals , 1996 .

[582]  M. D. Sumption,et al.  Finite element modeling of hydrostatic extrusion for mono-core superconductor billets , 2003 .

[583]  Jean-Loup Chenot,et al.  Implicit scheme for contact analysis in non‐steady state forming , 1998 .

[584]  P. Cavaliere,et al.  Isothermal forging of aluminium based metal matrix composites reinforced with 20% Al2O3 particles , 2003 .

[585]  Y. C Kim,et al.  A study on the corner filling in the drawing of a rectangular rod from a round bar , 2000 .

[586]  Chul Kim,et al.  Expert system for process planning of pressure vessel fabrication by deep drawing and ironing , 2004 .

[587]  Ching-Hwei Chue,et al.  Pitting formation under rolling contact , 2000 .

[588]  Gang Liu,et al.  The precision forming of pin parts by cold-drawing and rotary-forging , 1999 .

[589]  Yong-Taek Im,et al.  Finite element simulation of tip test with an aluminum alloy , 2001 .

[590]  B. Štok,et al.  Optimization of single and multistep wire drawing processes with respect to minimization of the forming energy , 1996 .

[591]  Zhengfang Qian,et al.  Physically based constitutive framework for precision metal forming processes , 1999 .

[592]  C. G. Kang,et al.  Optimum shape design techniques of direct roller under thermal load and rolling force in the direct rolling process of molten materials considering solid fraction , 1997 .

[593]  Luísa Costa Sousa,et al.  Inverse methods in design of industrial forging processes , 2002 .

[594]  Jose María Cabrera,et al.  Modelling the Hot Working of Simple Geometries Employing Physical-Based Constitutive Equations and the Finite Element Method , 1998 .

[595]  Laurent Baillet,et al.  3D finite element investigation on the plastic flows of rolling contacts—correlation with railhead microstructural observations , 2005 .

[596]  Kozo Osakada,et al.  Forming of aluminium alloy at temperatures just below melting point , 2003 .

[597]  Tamotsu Nakamura,et al.  FEM Simulation of a Friction Testing Metliod Based on Combined Forward Conical Can-Backward Straight Can Extrusion , 1998 .

[598]  Swadesh Kumar Singh,et al.  Application of a neural network to predict thickness strains and finite element simulation of hydro-mechanical deep drawing , 2005 .

[599]  Heng Li,et al.  Simulation for Guide Roll in 3D-FE Analysis of Cold Ring Rolling , 2004 .

[600]  S. L. Semiatin,et al.  The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion , 2000 .

[601]  Zhang Zhi-liang,et al.  Determination of metal material flow stress by the method of C-FEM , 2002 .

[602]  Peter Hodgson,et al.  Prediction of Hot Strength of Steels with Advanced Models , 2002 .

[603]  Y. Chen,et al.  A study on the machining characteristics of TiNi shape memory alloys , 2000 .

[604]  Youngseon Lee,et al.  Experimental and analytical evaluation for elastic deformation behaviors of cold forging tool , 2002 .

[605]  Ralf Volles,et al.  Flow stress measuring by use of cylindrical compression test and special application to metal forming processes , 2001 .

[606]  H. S. Kushwaha,et al.  Numerical Simulation of Residual Stresses in Pressure Tube Rolled Joints of Indian Pressurised Heavy Water Reactor , 2002 .

[607]  Siamak Serajzadeh Prediction of microstructural changes during hot rod rolling , 2003 .

[608]  Mohamed S. Gadala,et al.  Elasto-plastic finite element simulation of rolling and compression between wedge-shaped dies , 2000 .

[609]  Urban De Souza,et al.  Profile ring rolling , 2003 .

[610]  D H Kim,et al.  Prediction of the wear profile of a roll groove in rod rolling using an incremental form of wear model , 2003 .

[611]  C. J. Luis Pérez,et al.  Equal channel angular extrusion in a commercial Al–Mn alloy , 2003 .

[612]  Keith Davey,et al.  An efficient solution method for finite element ring-rolling simulation , 2000 .

[613]  Debin Shan,et al.  Study on precision forging technology for a complex-shaped light alloy forging , 2004 .

[614]  Uday S. Dixit,et al.  Finite-element analysis of flat rolling with inclusion of anisotropy , 1997 .

[615]  S. Suwas,et al.  Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field , 2004 .

[616]  Satoru Yoneyama,et al.  Photoviscoelastic Stress and Strain Analysis around a Surface Groove under Rolling Contact Load , 1997 .

[617]  Manuel Elices,et al.  Residual stresses in wires: Influence of wire length , 2003 .

[618]  Hyoung Jin Choi,et al.  A Process Sequence Design of Multi-Step Cold Extrusion Process for Hollow Parts , 2005 .

[619]  Zhengyi Jiang,et al.  Thermo-mechanical analysis of ribbed strip rolling by a three-dimensional rigid–visco-plastic FEM , 2002 .

[620]  Kazukiyo Kohno,et al.  Thermo-Viscoelastic Analysis of Rubber-Covered Rolls Taking Account of Heat Generation. , 2002 .

[621]  Xianghe Peng,et al.  Application of a physically based constitutive model to metal forming analysis , 2004 .

[622]  Terry Sheppard,et al.  A new spread formula for hot flat rolling of aluminium alloys , 2002 .

[623]  R. Arrieux,et al.  Numerical determination of strain localisation during finite element simulation of deep-drawing operations , 2005 .

[624]  W. B. Bae,et al.  An upper-bound analysis of metal forming processes by nodal velocity fields using a shape function , 1997 .

[625]  Lang Li Key technologies of numerical simulation of cup hydrodynamic deep drawing , 2000 .

[626]  Qiang Yang,et al.  A novel method for predicting the grain size of superalloy forgings based on the fuzzy method and the FEM , 2000 .

[627]  Jean-Loup Chenot,et al.  Adjoint state method for shape sensitivity analysis in non‐steady forming applications , 2003 .

[628]  Soo-Ik Oh,et al.  Recent developments in process simulation for bulk forming processes , 2001 .

[629]  Anh Kiet Tieu,et al.  Elastic-plastic finite element method simulation of thin strip with tension in cold rolling , 2002 .

[630]  R. Balendra,et al.  Measurements of thermal contact conductance , 2003 .

[631]  Yasunori Harada,et al.  Technology of Plasticity. Roll-Compression Bending of Chromium Plate. , 1997 .

[632]  Jean-Loup Chenot,et al.  Inverse problems in finite element simulation of metal forming processes , 1996 .

[633]  Jin Hou,et al.  Inward Flow of Surface Materials at Back-Ends of Billets During Al-Extrusion, Part 2: Influence of Process Parameters , 1999 .

[634]  Hyung-Ki Park,et al.  Analysis of the milli-forming of single-crystal and poly-crystal bar , 2001 .

[635]  Xiong Shangwu,et al.  Analysis of the non-steady state vertical–horizontal rolling process in roughing trains by the three-dimensional finite element method , 2002 .

[636]  信市 小野,et al.  超大形軸材の鍛造における内部空げき圧着に関する研究 : 第3報, 表面冷却鍛錬法の改善による空げき圧着条件の達成 , 1996 .

[637]  Michael R. Lovell Evaluation of Critical Interfacial Friction in Cross Wedge Rolling , 2001 .

[638]  Yb B. Park,et al.  Finite element analysis for precision cold forging of helical gear using recurrent boundary conditions , 1998 .

[639]  蔡敢为,et al.  Global coupled equations for dynamic analysis of planishing mill , 2003 .

[640]  Arne Melander A finite element study of short cracks with different inclusion types under rolling contact fatigue load , 1997 .

[641]  Jarosław Bartnicki,et al.  The aspects of stability in cross-wedge rolling processes of hollowed shafts , 2004 .

[642]  Habibou Maitournam,et al.  Pressure rolling contact: Steady state flow analysis and comparison with experimental data , 1996 .

[643]  Hoon Huh,et al.  Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis , 2002 .

[644]  Chun-Yin Wu,et al.  The influence of die shape on the flow deformation of extrusion forging , 2002 .

[645]  Ken-ichi Manabe,et al.  Virtual processing in intelligent BHF control deep drawing , 2003 .

[646]  Yooil Kim,et al.  An analysis of the forging processes for 6061 aluminum-alloy wheels , 2002 .

[647]  R. S. Minisandram,et al.  Effects of Process Variables on the Structure and Properties of Hot Rolled 718 Bar , 2001 .

[648]  Siamak Serajzadeh,et al.  Thermo-Mechanical Modeling of Hot Forging Process , 2004 .

[649]  J Hematian,et al.  Initial imperfections and the initiation of wrinkling in finite element modelling of deep drawing , 2000 .

[650]  Sridhar Santhanam,et al.  An algorithm for determining the optimal blank shape for the deep drawing of aluminum cups , 2002 .

[651]  Rade Ognjanovic,et al.  Finite element analysis modeling of ingot refusal conditions during the rolling process , 2003 .

[652]  Andrzej Gontarz,et al.  Some Aspects of New Forming Process of Screw Spike , 2002 .

[653]  Naren Ramakrishnan,et al.  A comparative evaluation of the theoretical failure criteria for workability in cold forging , 2003 .

[654]  Yuung-Hwa Lu,et al.  Wire drawing dies with prescribed variations of strain rate , 2002 .

[655]  Mark Jolly,et al.  Finite element investigations upon the influence of pocket die designs on metal flow in aluminium extrusion: Part I. Effect of pocket angle and volume on metal flow , 2003 .

[656]  N. Venkata Reddy,et al.  Die design for axisymmetric hot extrusion , 1997 .

[657]  Dimitrios E. Manolakos,et al.  On the finite-element modelling of the deep-drawing of square sections of coated steels , 1996 .

[658]  Kozo Osakada,et al.  Forming limit of magnesium alloy at elevated temperatures for precision forging , 2002 .

[659]  Janusz Majta,et al.  Modelling of the effects of strain-induced martensitic transformation on the mechanical behaviour in drawn tubes , 1997 .

[660]  Takaaki Toyooka,et al.  Effect of pass schedule on cross-sectional shapes of circular seamless pipes reshaped into square shapes by hot roll sizing mill , 2004 .

[661]  Hengan Ou,et al.  Die-elasticity for precision forging of aerofoil sections using finite element simulation , 1998 .

[662]  L. Cannizzaro,et al.  Application of a Decision Making Method to Improve an Industrial Hot Extrusion Forging Process , 1999 .

[663]  Reiner Kopp,et al.  Process Time Reduction by Means of Integrated Casting and Rolling , 1996 .

[664]  Wang Guangchun,et al.  Simulation and analysis of rotary forging a ring workpiece using finite element method , 2002 .

[665]  Ming Li,et al.  A Computational and Experimental Study of Cold Rolling of Aluminum Alloys With Edge Cracking , 2004 .

[666]  Björn Carlsson,et al.  The contact pressure distribution in flat rolling of wire , 1998 .

[667]  P. Lacki,et al.  Some aspects of modelling of metal forming processes , 2003 .

[668]  Catarina F. Castro,et al.  Optimization of metal forming processes , 2004 .

[669]  Xu Zuo,et al.  3D FEM simulation of multi-stage forging process using solid modeling of forging tools , 1999 .

[670]  S. L Srimani,et al.  Rail behaviour during cooling after hot rolling , 2004 .

[671]  M. Raudensky,et al.  Numerical simulation of transient cooling of hot rolled asymmetrical ship profile (Holland profile) , 1996 .

[672]  C. P Hong,et al.  Design of pass schedule for austenite grain refinement in plate rolling of a plain carbon steel , 2003 .

[673]  M. Abo-Elkhier,et al.  Elasto-plastic finite element modelling of strip cold rolling using Eulerian fixed mesh technique , 1997 .

[674]  Jun Yanagimoto FE-based analysis for the prediction of microstructure evolution in hot rolling , 2004 .

[675]  Paulo A.F. Martins,et al.  Simulation of three-dimensional bulk forming processes by finite element flow formulation , 2003 .

[676]  Yi Qin,et al.  Concept of a design support system for form comparison , 2001 .

[677]  John Monaghan,et al.  2D and 3D finite element analysis of a three stage forging sequence , 2002 .

[678]  Mehdi Imaninejad,et al.  Influence of end-conditions during tube hydroforming of aluminum extrusions , 2004 .

[679]  Wei-Hui Wang,et al.  Vibration analysis and measurement of a rolling stay , 1996 .

[680]  He Yang,et al.  Deformation characteristic of the precision forging of a blade with a damper platform using 3D FEM analysis , 2004 .

[681]  S. Thiruvarudchelvan,et al.  Hydraulic pressure enhancement of the deep-drawing process to yield deeper cups , 1998 .

[682]  Se-Yun Hwang,et al.  The forming characteristics of radial–backward extrusion , 2001 .

[683]  Habibou Maitournam,et al.  Experimental and numerical rolling contact fatigue study on the 32CrMoV13 steel , 2004 .

[684]  E. I. Panov Certain Aspects of the Stress-Strain State of Semifinished Products in Helical Rolling , 2003 .

[685]  Ramana V. Grandhi,et al.  Geometric deviations in forging and cooling operations due to process uncertainties , 2004 .

[686]  T Ohashi,et al.  Expert system of cold forging defects using risk analysis tree network with fuzzy language , 2000 .

[687]  J. M. Fragomeni,et al.  Effect of extrusion processing deformation and heat treating on the plastic flow, microstructure, and mechanical behavior of an aluminum alloy , 2004 .

[688]  Yong-Taek Im,et al.  Finite Element Investigation of Tip Test with an Aluminum Alloy , 2002 .

[689]  Yong-Taek Im,et al.  Numerical Prediction of Austenite Grain Size in Round-Oval-Round Bar Rolling , 2003 .

[690]  Yi Qin,et al.  Research dedicated to the development of advanced metal-forming technologies , 2004 .

[691]  Ulf Ståhlberg,et al.  A study of pore closure in the manufacturing of heavy rings , 1998 .

[692]  Sang Moo Hwang,et al.  An integrated FE process model for precision analysis of thermo-mechanical behaviors of rolls and strip in hot strip rolling , 2002 .

[693]  Shyong Lee,et al.  Finite element analysis of strain conditions after equal channel angular extrusion , 2003 .

[694]  J. Huetink,et al.  Deep drawing simulations of Tailored Blanks and experimental verification , 1998 .

[695]  Shigeru Aomura,et al.  Topology Optimization for the Extruded Three Dimensional Structure with Constant Cross Section , 2004 .

[696]  Laurent Dubar,et al.  Identification of Coulomb's friction coefficient in real contact conditions applied to a wire drawing process , 1997 .

[697]  Z. C. Lin,et al.  A three-dimensional finite element method for a nonisothermal aluminum flat strip rolling process , 1996 .

[698]  Fengshan Du,et al.  A coupled thermal–mechanical and microstructural simulation of the cross wedge rolling process and experimental verification , 2005 .

[699]  N. Venkata Reddy,et al.  A set-up model for tandem cold rolling mills , 2001 .

[700]  C. K. H. Dharan,et al.  Rolling consolidation of metal matrix composites , 1997 .

[701]  Uday S. Dixit,et al.  A finite element analysis of flat rolling and application of fuzzy set theory , 1996 .

[702]  Kazunari Yoshida,et al.  Superplastic forging process to the middle of a watch case and the analysis which made its process approximate a two-dimensional model. , 1999 .

[703]  Chun-Hui Luo,et al.  Modeling the frictional boundary conditions in a rolling process , 1996 .

[704]  Fionn P.E. Dunne,et al.  Anisothermal large deformation constitutive equations and their application to modelling titanium alloys in forging , 1997 .

[705]  Ust Beijing Rolling Characteristics of Continuous Cast Slabs with Liquid Core , 1999 .

[706]  Jose María Cabrera,et al.  Modeling thermomechanical processing of austenite , 2003 .

[707]  Alan N Bramley,et al.  Sensitivity of finite element analysis of forging to input parameters , 1998 .

[708]  Zou Lin,et al.  Optimization of die profile for improving die life in the hot extrusion process , 2003 .

[709]  Xavier Velay,et al.  Prediction of Material Flow Pattern in the Hot Extrusion of Aluminium Alloys by the Finite Element Method , 2003 .

[710]  Yasuhide Shindo,et al.  The Use of Finite Element Analysis and Notch Tensile Testing to Determine the Cryogenic Fracture Toughness of Thick Section Weldment in Forged CSUS-JN1 Plate with Inconel 625 Type Filler Metals , 2000 .

[711]  Akihiro Minami,et al.  Effect of the surface structure on the resistance to plastic deformation of a hot forging tool , 2001 .

[712]  Terry Sheppard,et al.  The influence of the constitutive equation on the simulation of a hot rolling process , 2004 .

[713]  Abul Fazal M. Arif On the use of non-linear finite element analysis in deformation evaluation and development of design charts for extrusion processes , 2003 .

[714]  P. F. Browning,et al.  An analysis of splitting failures during the drawing of tungsten wire , 1995 .

[715]  Wei Li Xu,et al.  Rigid‐plastic/rigid‐viscoplastic FE simulation using linear programming for metal forming , 2003 .

[716]  Qiang Xu,et al.  Finite element investigation of curvature in the roll platen forming process , 1996 .

[717]  J. Huetink,et al.  An effective split of flow and die deformation calculations of aluminium extrusion , 1999 .

[718]  Christian Miehe,et al.  Anisotropic elastic–plastic analysis of shells at large strains. A comparison of multiplicative and additive approaches to enhanced finite element design and constitutive modelling , 2004 .

[719]  Somnath Ghosh,et al.  Localized metal forming simulation by r-s-adapted arbitrary Lagrangian-Eulerian finite element method , 1997 .

[720]  Osamu Kamiya,et al.  Prediction of Fracture in Plate Forging. , 2002 .

[721]  Jin Hou Inward flow of surface materials at back-ends of billets during Al-extrusion. Part 1 : A finite element model , 1999 .

[722]  Chun-Sing Lee,et al.  Finite element analysis of hot forging with flow softening by dynamic recrystallization , 2003 .

[723]  Somnath Ghosh,et al.  Optimal Design of Process Variables in Multi-Pass Wire Drawing by Genetic Algorithms , 1996 .

[724]  M. A. Gutiérrez,et al.  Metal forming simulation , 1998 .

[725]  F. Fereshteh-Saniee,et al.  ANALYTICAL, NUMERICAL AND EXPERIMENTAL ANALYSES OF THE CLOSED-DIE FORGING , 2002 .

[726]  Byeong-Woo Kim,et al.  A study on the prediction of fatigue life in an axi-symmetric extrusion die , 1997 .

[727]  A Melander Simulation of the Behaviour of Short Cracks at Inclusions Under Rolling Contact Fatigue Loading — Specially the Effect of Plasticity , 1998 .

[728]  Jean-Philippe Ponthot,et al.  Parameter identification and shape/process optimization in metal forming simulation , 2003 .

[729]  Abdalla S. Wifi,et al.  An optimum-curved die profile for the hot forward rod extrusion process , 1998 .

[730]  Dong-Yol Yang,et al.  Investigation into the improvement of welding strength in three dimensional extrusion of tubes using porthole dies , 2002 .

[731]  Yong-Taek Im,et al.  Experimental and Numerical Prediction of Austenite Grain Size Distribution in Round-oval Shape Rolling , 2003 .

[732]  Hyunkee Kim,et al.  Cold forging of steel — practical examples of computerized part and process design , 1996 .

[733]  Daniel A. Tortorelli,et al.  Design of large‐deformation steady elastoplastic manufacturing processes. Part I: a displacement‐based reference frame formulation , 2000 .

[734]  Dong Nyung Lee,et al.  Analysis of hot forging of porous metals , 1996 .

[735]  Pierre Montmitonnet,et al.  A three-dimensional semi-analytical model of rolling stand deformation with finite element validation , 1998 .

[736]  Ramana V. Grandhi,et al.  Die cavity design of near flashless forging process using FEM-based backward simulation , 2002 .

[737]  Mike Foster,et al.  Process simulation of drawing and cold heading processes , 2005 .

[738]  Eiji Nakamachi,et al.  Development of process design system for press forming—multi-objective optimization of intermediate die shape in transfer forming , 2004 .

[739]  Peter Frederic Thomson,et al.  Quadratic programming method in numerical simulation of metal forming process , 2002 .

[740]  Andrzej Rosochowski,et al.  Numerical and physical modelling of plastic deformation in 2-turn equal channel angular extrusion , 2002 .

[741]  Jindřich Petruška,et al.  On the evaluation of strain inhomogeneity by hardness measurement of formed products , 2003 .

[742]  J. Huez,et al.  THREE-DIMENSIONAL FINITE-ELEMENT SIMULATION OF HOT RING ROLLING. , 2001 .

[743]  Shaker A. Meguid,et al.  Finite element analysis of the deep drawing process using variational inequalities , 1997 .

[744]  Maciej Pietrzyk,et al.  Evolution of the Microstructure in the Processes of Hot Compression and Drawing-Rolling* , 1996 .

[745]  Anh Kiet Tieu,et al.  Three-dimensional thermo-mechanical finite element simulation of ribbed strip rolling with friction variation , 2004 .

[746]  Yi Qin,et al.  Mechanics of pressure-assisted injection forging of tubular components , 2004 .

[747]  C. G. Sun,et al.  Investigation of the Thermo-mechanical Behavior of Type 304 Stainless Slab in Hot Charge Rolling Condition by the Finite Element Method , 2003 .

[748]  Mei Zhan,et al.  Research on Precision Forging Law of Complicated Blade by Using 3D FE Simulation and Physical Modeling , 2004 .

[749]  G. J. Creus Instability and damage effects in the modeling of metal forming , 2000 .

[750]  Lee Jung-Hwan,et al.  Process design in multi-stage cold forging by the finite-element method , 1996 .

[751]  Brad L. Kinsey,et al.  Rapid design of corner restraining force in deep drawn rectangular parts , 2000 .

[752]  D. Tanner,et al.  Residual stress prediction and determination in 7010 aluminum alloy forgings , 2000 .

[753]  Magnus Jarl,et al.  Development and validation of FEM models for wiredrawing , 2004 .

[754]  Leon M Keer,et al.  Application of direct method for a nonlinear-kinematic-hardening material under rolling/sliding line contact: Constant ratchetting rate , 1997 .

[755]  Fuh-Kuo Chen,et al.  Fatigue life of cold-forging dies with various values of hardness , 2001 .

[756]  Yong-Taek Im,et al.  Application of parallel processing in three-dimensional bulk forming finite element analysis , 2004 .

[757]  Dong-Yol Yang,et al.  Finite element modelling of the high-velocity impact forging process by the explicit time integration method , 1997 .

[758]  S. M. Hwang,et al.  Die shape optimal design in bimetal extrusion by the finite element method , 1997 .

[759]  Liu Gang,et al.  Finite element simulation of a new deformation type occurring in changing-channel extrusion , 2000 .

[760]  John Monaghan An investigation of plane-strain lateral extrusion to form components having staggered branches , 1998 .

[761]  E. I. Panov Helical Rolling of Solid Semifinished Products: Radial Stresses , 2004 .

[762]  Masahito Yamanaka,et al.  FE simulation as a must tool in cold/warm forging process and tool design , 2000 .

[763]  Niels Bay,et al.  On parameters affecting metal flow and friction in the double cup extrusion test , 1998 .

[764]  Yong-Taek Im,et al.  Remeshing for metal forming simulations—Part I: Two‐dimensional quadrilateral remeshing , 2002 .

[765]  H. J. McQueen,et al.  Extrusion Modeling of Solute, Eutectic and Precipitation Al Alloys , 2002 .

[766]  Michał Kleiber,et al.  Sensitivity analysis of metal forming processes involving frictional contact in steady state , 1996 .

[767]  Yong Liu,et al.  Stabilized finite element method for viscoplastic flow: formulation and a simple progressive solution strategy , 2001 .

[768]  Zbigniew Gronostajski,et al.  Physical and mathematical modelling of extrusion processes , 2000 .

[769]  Masaki Watanabe,et al.  Drawing of Ni–Ti shape-memory-alloy fine tubes used in medical tests , 2001 .

[770]  J. Gil-Sevillano,et al.  An analysis of the extrusion of bimetallic tubes by numerical simulation , 1996 .

[771]  Li,et al.  FEM SIMULATION OF BIMETAL FORMING PROCESS BASED ON FRICTIONAL ELEMENT TECHNOLOGY , 1996 .

[772]  Paulo A.F. Martins,et al.  Deformation analysis of the round-to-square extrusion: a numerical and experimental investigation , 2000 .

[773]  Ioan D. Marinescu,et al.  Analysis of the Possibility to Simulate a 3D Single-Roll Burnishing Process Using FEA , 2002 .

[774]  Ramana V. Grandhi,et al.  Preform design of a generic turbine disk forging process , 1998 .

[775]  Niels Bay,et al.  FEM simulation of friction testing method based on combined forward rod-backward can extrusion , 1997 .

[776]  Andrzej Milenin,et al.  Theoretical and experimental analysis of the rolling process of bimetallic rods Cu-steel and Cu-Al , 2004 .

[777]  Sylvain Turenne,et al.  Mechanical behavior of aluminum matrix composite during extrusion in the semisolid state , 1999 .

[778]  C. J. Luis Pérez,et al.  Processing of aluminium alloys by equal channel angular drawing at room temperature , 2003 .

[779]  John R. Scully,et al.  A critical-strain criterion for hydrogen embrittlement of cold-drawn, ultrafine pearlitic steel , 2002 .

[780]  Matthias Kleiner,et al.  Experimental and Finite Element Analysis of Capabilities and Limits of a Combined Pneumatic and Mechanical Deep-Drawing Process , 1997 .

[781]  I. V. Samarasekera,et al.  Mathematical modeling of the extrusion of 6061/Al2O3/20p composite , 1996 .

[782]  Albert Cremer,et al.  Effects of roll crossing on the rolling process in four-high mills , 1996 .

[783]  Zonc-Ching Lin,et al.  A rolling process two-dimensional finite element model analysis , 1997 .

[784]  John Monaghan,et al.  A finite element analysis of cold-forging dies using two- and three-dimensional models , 2001 .

[785]  W. Liu,et al.  Preventing weld hot cracking by synchronous rolling during welding , 1996 .

[786]  Zhongqin Lin,et al.  Application of integrated formability analysis in designing die-face of automobile panel drawing dies , 2002 .

[787]  Laurent Dubar,et al.  A multi-step lubricant evaluation strategy for wire drawing–extrusion–cold heading sequence , 2001 .

[788]  Michael Cardew-Hall,et al.  A finite element simulation of micro-mechanical frictional behaviour in metal forming , 2003 .

[789]  Corrado Noseda The role of temperature in copper wire drawing , 2001 .

[790]  D. P. DeLo,et al.  Finite-element modeling of nonisothermal equal-channel angular extrusion , 1999 .

[791]  Joachim Danckert,et al.  Finite element analysis of the hydromechanical deep-drawing process of tapered rectangular boxes , 2000 .

[792]  Zone-Ching Lin,et al.  An investigation of contact problem between strip and work roll with a smooth straight surface during cold rolling , 1997 .

[793]  Sang-Moon Hwang,et al.  Finite Element Analysis of Multi-Stage Deep Drawing Process for High Precision Rectangular Case with Extreme Aspect Ratio , 2002 .

[794]  Yi Qin,et al.  A method for the simulation of temperature stabilisation in the tools during multi-cycle cold-forging operations , 2000 .

[795]  Ramana V. Grandhi,et al.  PREFORM DIE SHAPE DESIGN IN METAL FORMING USING AN OPTIMIZATION METHOD , 1997 .

[796]  X. M. Duan,et al.  Local bias potential in hyper molecular dynamics method , 2003 .

[797]  Laurent Stainier,et al.  Parameter identification using inverse problems methodology in metal forming simulation , 2000 .

[798]  Byung-Min Kim,et al.  Application of the finite element method to predict microstructure evolution in the hot forging of steel , 2000 .

[799]  Piotr Szota,et al.  3D FEM modelling and its experimental verification of the rolling of reinforcement rod , 2004 .

[800]  Pete S. Bate,et al.  Texture development in the cold rolling of IF steel , 2004 .

[801]  Trevor A. Dean,et al.  Effects of surface treatments and lubricants for warm forging die life , 2001 .

[802]  Paulo A.F. Martins,et al.  Cold forging of gears: experimental and theoretical investigation , 2001 .

[803]  Alan N Bramley,et al.  Parametric sensitivity analyses for FEA of hot steel forging , 2002 .

[804]  Luigi Maria Galantucci,et al.  Thermo-mechanical simulation of a rolling process with an FEM approach , 1999 .

[805]  Ivan Prebil,et al.  Determination Of Damage Material Properties For The Calculation Of Large Rolling Bearing Carrying Capacity , 2001 .

[806]  Su Hai Hsiang,et al.  Study of a 3-D FEM combined with the slab method for shape rolling , 2000 .

[807]  Duck-Jool Kim,et al.  Application of ANN for the dimensional accuracy of workpiece in hot rod rolling process , 2002 .

[808]  Paulo A.F. Martins,et al.  On the utilisation of ductile fracture criteria in cold forging , 2003 .

[809]  Anh Kiet Tieu,et al.  A 3-D finite element method analysis of cold rolling of thin strip with friction variation , 2004 .

[810]  Hakim Naceur,et al.  SOME IMPROVEMENTS ON THE OPTIMUM PROCESS DESIGN IN DEEP DRAWING USING THE INVERSE APPROACH , 2004 .

[811]  D. Seo,et al.  Blank design and formability for non-circular deep drawing processes by the finite-element method , 1998 .

[812]  Zhengyi Jiang,et al.  A 3D finite element analysis of the hot rolling of strip with lubrication , 2002 .

[813]  Byeong-Woo Kim,et al.  Optimal die profile design for uniform microstructure in hot extruded product , 2000 .

[814]  ka,et al.  Mathematical Modelling And Numerical Simulation Of Non-linear Deformation Of The Asperity In The Burnishing Cold Rolling Operation , 2001 .

[815]  Dong-Yol Yang,et al.  Rigid‐plastic finite element analysis of incremental radial forging process using the automatic expansion of domain scheme , 2004 .

[816]  Byung-Seok Kang,et al.  Prediction and design of edge shape of initial strip for thick tube roll forming using finite element method , 2003 .

[817]  Lallit Anand,et al.  Single crystal and polycrystal elasto-viscoplasticity: Application to earing in cup drawing of F.C.C. materials , 1996 .

[818]  Niels Bay,et al.  Fatigue in cold-forging dies: tool life analysis 1 The work here described was presented at the 1997 , 1999 .

[819]  H. S. Jeong,et al.  Parametric investigation on the curling phenomenon in CONFORM process by three-dimensional finite element analysis , 2001 .

[820]  N. Venkata Reddy,et al.  Analysis of axisymmetric tube extrusion , 1996 .

[821]  Maria Teresa Paulino Aguilar,et al.  The evaluation of redundant deformation factors in axi-symmetric bar drawing of austenitic stainless steel , 2002 .

[822]  J. C. Choi,et al.  An Automated Process Planning and Die Design System for Quasi-Axisymmetric Cold Forging Products , 2002 .

[823]  Morten Rikard Jensen,et al.  Numerical Model for the Oil Pressure Distribution in the Hydromechanical Deep Drawing Process , 1998 .

[824]  Chung-Gil Kang,et al.  Finite element analysis with deformation behavior modeling of globular microstructure in forming process of semi-solid materials , 1999 .

[825]  Zhengyi Jiang,et al.  Modelling of Thin Strip Cold Rolling With Friction Variation by A 3-D Finite Element Method , 2003 .

[826]  M M Salah El-Din Effect of viscous dissipation on laminar mixed convection in a horizontal channel , 2002 .

[827]  Sy-Wei Lo,et al.  Optimally-controlled strain-rate dies for plane-strain extrusion , 1999 .

[828]  Kichan Son,et al.  Optimum blank shape design by sensitivity analysis , 2000 .

[829]  W. B. Bae,et al.  A study of the manufacturing of tie-rod ends with casting/forging process , 2002 .

[830]  A. W. Lees,et al.  Formation of residual stresses owing to tension levelling of cold rolled strip , 2001 .

[831]  K. Yoshida,et al.  Surface quality improvement of multistage forged microparts for wristwatches , 2003 .

[832]  Rajiv Shivpuri,et al.  Computational modeling of phase transformations and mechanical properties during the cooling of hot rolled rod , 2004 .

[833]  Amir Khajepour,et al.  A new shape change quantification method for estimation of power in shape rolling , 2004 .

[834]  Morten Rikard Jensen,et al.  Optimization of the draw-die design in conventional deep-drawing in order to minimise tool wear , 1998 .

[835]  K. Yoshida,et al.  FEM Analysis of Wire Breaks in Drawing of Superfine Wire with an Inclusion , 2000 .

[836]  Maksym Grzywiński,et al.  Stochastic equations of rigid-thermo-viscoplasticity in metal forming process , 2002 .

[837]  Yongnam Kwon,et al.  Analysis of the elastic characteristics at die and workpiece to improve the dimensional accuracy for cold forged part , 2004 .

[838]  Yukio Kojima,et al.  Numerical Analysis of Viscous Lubricating Oil Penetrating into a Three-Dimensional Rolling Contact Fatigue Crack , 2002 .

[839]  Z. Zimniak,et al.  Implementation of the forming limit stress diagram in FEM simulations , 2000 .

[840]  M. Forejt,et al.  On modelling of the contact conditions in compound die using the hermitian finite elements , 1996 .

[841]  Jiro Hiramoto,et al.  Utilization of finite element method for expanding application of high strength steels to automotive body , 2002 .

[842]  Chinghua Hung,et al.  Experimental and numerical analyses on three-roll planetary rolling process , 2003 .

[843]  Mohammad Reza Forouzan,et al.  Three-dimensional FE analysis of ring rolling by employing thermal spokes method , 2003 .

[844]  Man-Soo Joun,et al.  Rigid–viscoplastic finite element analysis of the piercing process in the automatic simulation of multi-stage forging processes , 2000 .

[845]  S M Byon,et al.  Predictions of roll force under heavy-reduction hot rolling using a large-deformation constitutive model , 2004 .

[846]  Julian H. Driver,et al.  Texture gradient simulations for extrusion and reversible rolling of FCC metals , 2000 .

[847]  Ramana V. Grandhi,et al.  Sensitivity analysis and shape optimization for preform design in thermo‐mechanical coupled analysis , 1999 .

[848]  Eduardo N. Dvorkin,et al.  Finite element simulation of the steel plates hot rolling process , 2001 .

[849]  Joachim Danckert,et al.  Characterization of residual stresses generated during inhomogeneous plastic deformation , 1998 .

[850]  Jian Cao,et al.  Shell element formulation of multi-step inverse analysis for axisymmetric deep drawing process , 2001 .

[851]  A. Venugopal Rao,et al.  Simulation of isothermal forging of compressor disc by combined numerical and physical modelling techniques , 1997 .

[852]  Xiong Shangwu,et al.  A three-dimensional finite element simulation of the vertical–horizontal rolling process in the width reduction of slab , 2000 .

[853]  Dong-Yol Yang,et al.  Elastic-Plastic Finite Element Analysis of Deep Drawing Processes by Membrane and Shell Elements , 1997 .

[854]  Dong-Yol Yang,et al.  Numerical simulation of multi‐blow forging processes using the explicit time integration finite element method , 1997 .

[855]  J. C. Lin,et al.  Prediction of Rolling Force and Deformation in Three-Dimensional Cold Rolling by Using the Finite-Element Method and a Neural Network , 2002 .

[856]  Kwan-Do Hur,et al.  Analysis and Design of the Prestressed Cold Extrusion Die , 2001 .

[857]  H.J. McQueen,et al.  Extrusion Modelling of Aluminum Particulate Composites , 2000 .

[858]  John H. Beynon,et al.  Measurement of oxide properties for numerical evaluation of their failure under hot rolling conditions , 2002 .

[859]  John Monaghan,et al.  Failure analysis of cold forging dies using FEA , 2001 .

[860]  Peter Frederic Thomson,et al.  Prediction of the deflection and residual stress in controlled cooling of hot-rolled steel beams including load and arbitrary support: Part II. Experimental validation and application , 2004 .

[861]  Harald Leitner,et al.  Residual stresses in forged IN718 turbine discs , 2004 .

[862]  C. G. Kang,et al.  A coupled solidification analysis of materials and cooling roller in direct rolling process , 1997 .

[863]  Dong-Teak Chung,et al.  Transient wrinkling analysis of steel web rolling , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[864]  Kazunari Yoshida,et al.  Growth and disappearance of flaws on wire surface in wiredrawing , 2004 .

[865]  Zhang Zhao Numerical Simulation of Extrusion Pressure in the Process of Hydrostatic Extrusion , 2001 .

[866]  Marcin Knapiński,et al.  The numerical analysis of roll deflection during plate rolling , 2006 .

[867]  Dong Nyung Lee,et al.  Simulation of Ridging of Ferritic Stainless Steel Using Crystal Plasticity Finite Element Method , 2002 .

[868]  XiaoyanLi,et al.  Improvement on strip flatness of cold temper mills by modifying roll contour shape , 2004 .

[869]  Paulo Roberto Cetlin,et al.  Analysis of a new model material for the physical simulation of metal forming , 1998 .

[870]  David C. Goss High strength fasteners cold forged out of work hardening steel , 2000 .

[871]  Jun Yanagimoto,et al.  TOPICAL REVIEW: FE-based analysis for the prediction of inner microstructure in metal forming , 2002 .

[872]  Dong-Yol Yang,et al.  Investigation into the thermo-viscoplastic finite element analysis of square die extrusion of square section with Lagrangian description , 1996 .

[873]  Peter Frederic Thomson,et al.  Numerical analysis of residual stress in hot-rolled steel strip on the run-out table , 2003 .

[874]  Wang Guangchun,et al.  Methods of dealing with some problems in analyzing rotary forging with the FEM and initial application to a ring workpiece , 1997 .

[875]  Suleyman Tasgetiren,et al.  A numerical study of the behaviour of surface cracks under dry-sliding conditions , 2003 .

[876]  A. Behrens,et al.  Verification of the damage model of effective stresses in cold and warm forging operations by experimental testing and FE simulations , 2002 .

[877]  Dong-Kuk Kim,et al.  Analysis and prevention of cracking phenomenon occurring during cold forging of two AISI 1010 steel pulleys , 1999 .

[878]  Mark A.M. Bourke,et al.  Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion , 2004 .

[879]  Paulo A.F. Martins,et al.  Injection forging of tubular materials: a workability analysis , 1997 .

[880]  S. Vijayakar THERMAL INFLUENCES ON RESIDUAL STRESSES IN DRAWN WIRE: A FINITE ELEMENT ANALYSIS , 1997 .

[881]  Mehdi Imaninejad,et al.  Experimental and numerical investigation of free-bulge formation during hydroforming of aluminum extrusions , 2004 .

[882]  C. G. Sun,et al.  Prediction of Roll Thermal Profile in Hot Strip Rolling by the Finite Element Method , 2000 .

[883]  Young-Suk Kim,et al.  Rigid–plastic finite element simulation for process design of impeller hub forming , 2003 .

[884]  Joseph P. Domblesky,et al.  Grain Size Modeling and Optimization of Rotary Forged Alloy 718 , 1997 .

[885]  Chung-Gil Kang,et al.  Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation , 2002 .

[886]  Yong-Taek Im,et al.  Analysis and design of flat-die hot extrusion process - 1. Three-dimensional finite element analysis , 2002 .

[887]  C. Kang,et al.  Model experiments for the determination of the heat-transfer coefficient and transition thermal analysis in the direct rolling process , 1998 .

[888]  R. V. Grandhi,et al.  Design of Forging Process Parameters With Deformation and Temperature Constraints , 1996 .

[889]  Hui Long Dimensional errors of cold formed components using FE simulation. , 2004 .

[890]  Dong-Yol Yang,et al.  Three‐dimensional finite element simulation of connecting rod forging using a new remeshing scheme , 1998 .

[891]  Kaveh A. Tagavi,et al.  Influence of Material Properties and Forming Velocity on the Interfacial Slip Characteristics of Cross Wedge Rolling , 2001 .

[892]  Yi Qin,et al.  FE simulation of the influence of die-elasticity on component dimensions in forward extrusion , 1997 .

[893]  Jie Zhou,et al.  FEM analysis of aluminium extrusion through square and round dies , 2000 .

[894]  Kwok-Fai Chung,et al.  Finite element modeling of bolted connections between cold-formed steel strips and hot rolled steel plates under static shear loading , 2000 .

[895]  Abul Fazal M. Arif,et al.  Roll deformation and stress distribution under thermo-mechanical loading in cold rolling , 2004 .

[896]  A. K. Tieu,et al.  Modelling of the rolling processes by a 3-D rigid plastic/visco-plastic finite element method with shifted ICCG method , 2001 .

[897]  D. H. Jang,et al.  The process sequence design of a power-assisted steering part , 2001 .

[898]  Hyoung Jin Choi,et al.  A Study on Material Flow in Combined Extrusion Process , 2005 .

[899]  Jože Flašker,et al.  Numerical procedure for predicting the rolling contact fatigue crack initiation , 2003 .

[900]  Kamineni Pitcheswara Rao,et al.  Analysis of the deformation characteristics of spike-forging process through FE simulations and experiments , 1997 .

[901]  John H. Beynon,et al.  Finite element model of steel oxide failure during tensile testing under hot rolling conditions , 1999 .

[902]  Henryk Dyja,et al.  FEM modelling of drawing of wires for prestressed concrete , 2004 .

[903]  Rolf Bünten,et al.  Development of a FEM-model for the simulation of the transfer of surface structure in cold-rolling processes , 1996 .

[904]  Elena Kabo,et al.  Material defects in rolling contact fatigue — influence of overloads and defect clusters , 2002 .

[905]  Mpf Sutcliffe,et al.  Evolution of matt surface topography in aluminium pack rolling. Part I: model development $ , 2004 .

[906]  Henryk Dyja,et al.  Simulation of the deformation of strip between stands during the process of rolling with a loop , 2002 .

[907]  P. Dawson,et al.  Mesoscale Modeling of Microstructure and Texture Evolution During Deformation Processing of Metals , 2002 .

[908]  Xiong Shangwu,et al.  3-D rigid-plastic FEM analysis of the rolling of a strip with local residual deformation , 1998 .

[909]  Kjell Holthe,et al.  Adaptive exponential finite elements for the shear boundary layer in the bearing channel during extrusion , 2002 .

[910]  S. M. Byon,et al.  Simplified approach for prediction of spread, roll load and torque in grooveless rolling of billets , 2004 .

[911]  Lihua You,et al.  Single-patch surfaces for tool shape design and finite element analysis of hot extrusion , 2004 .

[912]  Nader Asnafi,et al.  Tubular hydroforming of automotive side members with extruded aluminium profiles , 2003 .

[913]  Eduardo N. Dvorkin,et al.  Modeling of metal forming processes: implementation of an iterative solver in the flow formulation , 2001 .

[914]  Jean-Philippe Ponthot,et al.  Numerical Simulation of Lubricated Contact in Rolling Processes , 2002 .

[915]  Nicholas Zabaras,et al.  A sensitivity analysis for the optimal design of metal-forming processes , 1996 .

[916]  Patrick Martin,et al.  Forming Machine Qualification by Analysis of Manufactured Parts Geometry: Application to Aluminium Forming Process , 2003 .

[917]  Reiner Kopp,et al.  Finite Element Simulation of an Industrial hot Rolling Schedule of Aluminium using Integrated Microstructure Models , 2003 .

[918]  Byung-Min Kim,et al.  Analytical model of pass‐by‐pass strain in bar rolling and its verification , 2002 .

[919]  Laurent Dubar,et al.  Hardening behaviour law versus rigid perfectly plastic law: application to a cold forging tool steel , 2002 .

[920]  Yong-Taek Im,et al.  Analytical model for prediction of deformed shape in three-roll rolling process , 2003 .

[921]  Rajiv Shivpuri,et al.  Prediction and control of part distortion during the hot extrusion of titanium alloys , 2004 .

[922]  Paulo A.F. Martins,et al.  Injection forging of industrial components from thick-walled tubes , 1997 .

[923]  Fei Cao Optimization of the blank design in deep drawing by the computer simulation method , 2002 .

[924]  Wang Zhong-jin,et al.  Finite-element analysis of the load of equal-cross-section lateral extrusion , 1999 .

[925]  Siamak Serajzadeh,et al.  Modelling the work-roll temperature variation at unsteady state condition , 2003 .

[926]  Wang,et al.  ANALYSIS OF SLAB EDGING BY A 3-D RIGID VISCO-PLASTIC FINITE ELEMENT METHOD , 2002 .

[927]  Naksoo Kim,et al.  Flow simulation of semisolid forging by FEM , 1997 .

[928]  Stefania Bruschi,et al.  Integrating physical and numerical simulation techniques to design the hot forging process of stainless steel turbine blades , 2004 .

[929]  Sang Jo Lee,et al.  Development of a padless ultraprecision polishing method using electrorheological fluid , 2004 .

[930]  Byung-Min Kim,et al.  Effect of reduction ratio, inclusion size and distance between inclusions on wire breaks in Cu fine wiredrawing , 2002 .

[931]  D. J. Kim,et al.  Application of neural network and FEM for metal forming processes , 2000 .

[932]  T. Sheppard,et al.  Three dimensional thermal mechanical coupled simulation during hot rolling of aluminium alloy 3003 , 2002 .

[933]  John H. Beynon,et al.  Analysis of secondary oxide-scale failure at entry into the roll gap , 2000 .

[934]  H. Ahrens,et al.  FE-analysis of the recipient of an extrusion press applying microstructure-related material models , 1997 .

[935]  Manuel Elices,et al.  Residual stresses in cold drawn pearlitic rods , 2005 .

[936]  Matthew S. Burkins,et al.  Computational modeling of through-thickness dynamic impact response in cross-rolled Ti-6Al-4V plates , 2002 .

[937]  Jindřich Petruška,et al.  Cold forming of bolts without thermal treatment , 2002 .

[938]  Dong-Yol Yang,et al.  Analysis and design of industrial hot extrusion process through square dies for manufacturing complicated Al alloy profiles , 1996 .

[939]  N. Venkata Reddy,et al.  Prediction of internal defects in plane strain rolling , 2005 .

[940]  Kazutake Komori Rigid-plastic finite-element method for analysis of three-dimensional rolling that requires small memory capacity , 1998 .

[941]  Keith Davey,et al.  An ALE approach for finite element ring-rolling simulation of profiled rings , 2003 .

[942]  John H. Beynon,et al.  Hot workability of spray-formed AISI M3:2 high-speed steel , 2004 .

[943]  Yong-Taek Im,et al.  Three-dimensional finite element analysis of non-isothermal shape rolling , 2002 .

[944]  R. W. Evans,et al.  Modelling flow stress evolution during elevated temperature deformation of two low carbon steels , 1996 .

[945]  Guido Berti,et al.  Wear in Hot and Warm Forging: Design and Validation of an New Laboratory Test , 1996 .

[946]  Luís Menezes,et al.  Three-dimensional numerical simulation of the deep-drawing process using solid finite elements , 2000 .

[947]  Z. Pater Simulation of cross-wedge rolling process using the upper-bound method , 1998 .

[948]  Liping Lei,et al.  Three-dimensional rigid-plastic finite element simulation for the two-roll cross-wedge rolling process , 2002 .

[949]  Essam El-Magd Simulation of material behaviour under dynamic loading , 1999 .

[950]  C. G. Sun,et al.  Finite Element Modeling of Thermo-mechanical and Metallurgical Behavior of Type 304 Stainless Steel in Cold Strip Rolling , 2003 .

[951]  Kunio Hayakawa,et al.  Tribo-testing method for estimating tribo-characteristics at piercing punch in backward can extrusion , 2003 .

[952]  Sheng Lin Di,et al.  A general rigid-plastic/rigid-viscoplastic FEM for metal-forming processes based on the potential reduction interior point method , 2003 .

[953]  Jue Zhong,et al.  Experimental study on material properties of hot rolled and continuously cast aluminum strips in cold rolling , 2003 .

[954]  Kazutake Komori,et al.  Analysis of stress distribution in caliber rolling by the energy method using finite-element division , 2001 .

[955]  K. Davey,et al.  The practicalities of ring rolling simulation for profiled rings , 2002 .

[956]  Richard Dashwood,et al.  Isothermal subtransus forging of Ti–6Al–2Sn–4Zr–6Mo , 2002 .

[957]  Taylan Altan,et al.  Flashless closed-die upset forging-load estimation for optimal cold header selection , 1996 .

[958]  Luísa Costa Sousa,et al.  Optimisation of shape and process parameters in metal forging using genetic algorithms , 2004 .

[959]  Soo-Ik Oh,et al.  Cylindrical tube optimization using response surface method based on stochastic process , 2002 .

[960]  Knut Marthinsen,et al.  Modelling the Evolution of Microstructure and Properties during Deformation of Aluminium , 2002 .

[961]  Santosh Kumar,et al.  Feature-based design of extrusion process using upper-bound and finite element techniques for extrudable shapes , 2004 .

[962]  Majid T. Manzari,et al.  A Finite Element Approach to Transient Thermal Analysis of Work Rolls in Rolling Process , 2000 .

[963]  Manfred Geiger,et al.  Fundamental aspects for the evaluation of the fatigue behaviour of cold forging tools , 2001 .

[964]  Philip J. Withers,et al.  Numerical prediction of the development of particle stress in the forging of aluminium metal matrix composites , 1996 .

[965]  Eugenio Oñate,et al.  Advances in FE explicit formulation for simulation of metalforming processes , 2001 .

[966]  Xincai Tan,et al.  Comparisons of friction models in bulk metal forming , 2002 .

[967]  Dong-Yol Yang,et al.  Analysis and Design of Multiblow Hammer Forging Processes by the Explicit Dynamic Finite Element Method , 1997 .

[968]  Tateo Yamada,et al.  Improvement of Seam-defects on Strip Edge of Stainless Steel , 1996 .

[969]  Chung-Li Hwan Plane strain extrusion by sequential limit analysis , 1997 .

[970]  Andrzej Gontarz,et al.  Influence of deformation parameters on grain size of AlSi1Mg alloy in forging , 2003 .

[971]  Youngseog Lee Prediction of the surface profile and area of the exit cross section of workpiece in round-oval-round pass sequence : Forming Processing and Thermomechanical Treatment , 2002 .

[972]  R. H. Wagoner,et al.  An algorithm for improved convergence in forming analysis , 1997 .

[973]  T Kuboki,et al.  Effect of final drawing with light reduction on the levelling of residual stress distribution in cold bar drawing , 2000 .

[974]  Kazutake Komori Simulation of chevron crack formation and evolution in drawing , 1999 .

[975]  H. Antunez,et al.  Combined shape and non-shape sensitivity for optical design of metal forming operations , 2004 .

[976]  S. Domanti,et al.  Cold rolling of flat metal products: Contribution of mathematical modelling , 1998 .

[977]  S. M. Hwang,et al.  Process Optimal Design in Forging by Genetic Algorithm , 2002 .

[978]  Manabu Gotoh,et al.  Numerical Simulation of Multistage Forging Process. 2nd Report. Application to Reduction of Stages in a Multistage Forging Process. , 1997 .

[979]  Boris Štok,et al.  Tool design optimization in extrusion processes , 1998 .

[980]  N. N. Kishore,et al.  Finite Element Analysis of Rolling Contact Problems Using Minimum Dissipation of Energy Principle , 1998 .

[981]  Yong-Ming Guo,et al.  Hot backward extrusion comparative analyses by a combined finite element method , 2000 .

[982]  Leon M. Keer,et al.  Elastic-plastic rolling-sliding contact on a quarter space , 1996 .

[983]  Jianzhong Xu,et al.  FEM analysis of stress on roll surface black oxide layers exfoliation in hot strip rolling , 2002 .

[984]  Thomas Ørts Pedersen Numerical studies of low cycle fatigue in forward extrusion dies , 2000 .

[985]  Weimin Mao,et al.  Introduction of a texture component crystal plasticity finite element method for anisotropy simulations , 2001 .

[986]  Trond Furu,et al.  Extrusion of different aluminium alloys; experimental work and modelling treatments , 2001 .

[987]  Luísa Costa Sousa,et al.  Simulation model for hot and cold forging by mixed methods including adaptive mesh refinement , 1996 .

[988]  D. Lochegnies,et al.  A mixed variational formulation for the solution of Norton-Hoff viscoplastic flows , 1997 .

[989]  C. Yun,et al.  Investigation of thermomechanical behavior of a work roll and of roll life in hot strip rolling , 1998 .

[990]  Reiner Kopp,et al.  POSSIBILITIES OF INFLUENCING RESIDUAL STRESSES IN DRAWN WIRES AND BARS , 1996 .

[991]  Li,et al.  DYNAMIC SIMULATION OF MICROSTRUCTURE EVOLUTION DURING HOT FORGING FOR ENGINE STIGMATA , 2000 .

[992]  Stephen Moir,et al.  Surface defects—evolution and behaviour from cast slab to coated strip , 2002 .

[993]  Haluk Darendeliler,et al.  Analysis of tapered preforms in cold upsetting , 1999 .

[994]  Development of micro-piercing system with punch-damage monitoring function , 2002 .

[995]  Magnus Langseth,et al.  Transition Between Progressive And Global Buckling Of Aluminium Extrusions , 2002 .

[996]  Gérard Bernhart,et al.  Influence of design and process parameters on service life of nut hot forging die , 2004 .

[997]  D. H. Jang,et al.  A Study on the Process Design of Cold-Forged Automobile Parts , 2004 .

[998]  Trond Furu,et al.  Modelling of full-scale industrial rolling and recrystallisation of strips of alloy 3103 , 2001 .

[999]  R. Kreißig,et al.  Thermomechanical finite element analysis (FEA) of spin extrusion , 2003 .

[1000]  Jean-Claude Gelin,et al.  A finite element-based identification method for complex metallic material behaviours , 2001 .

[1001]  Antoinette M. Maniatty,et al.  Stabilized finite element method for viscoplastic flow: formulation with state variable evolution , 2003 .

[1002]  Qiang Xu,et al.  Elastic–plastic finite element investigation of the effect of the aspect ratio on curvature in the roll–platen forming process , 2000 .

[1003]  F. Lin,et al.  Radius ratio estimation and fold situation prediction of the deformation profile in forging-extrusion process , 2002 .

[1004]  Su-Hai Hsiang,et al.  Analysis of the bulging in shape rolling by combined 3D-FEM with slab method , 2000 .

[1005]  Kunwoo Lee,et al.  A grouping algorithm for custom-tailored products , 2002 .

[1006]  James J.H. Liou,et al.  Study of stress development in axi-symmetric products processed by radial forging using a 3-D non-linear finite-element method , 1998 .

[1007]  Yi Qin,et al.  Design considerations for hydromechanical deep drawing of sheet components with concave features , 2004 .

[1008]  Ramana V. Grandhi,et al.  Microstructure optimization in design of forging processes , 2000 .

[1009]  Niels Bay,et al.  Control of material flow in a combined backward can - forward rod extrusion , 1996 .

[1010]  Ridha Hambli,et al.  Damage and fracture simulation during the extrusion processes , 2000 .

[1011]  Jong Jin Park,et al.  Design of rolling pass schedules to improve grain-size uniformity in thickness , 2003 .

[1012]  J P Domblesky,et al.  Two-dimensional and three-dimensional finite element models of external thread rolling , 2002 .

[1013]  Paulo A.F. Martins,et al.  Friction in bulk metal forming: a general friction model vs. the law of constant friction , 1997 .

[1014]  A N Bramley,et al.  Predictions and measurements of residual stresses from forging and heat treatment , 2004 .

[1015]  Lallit Anand,et al.  Polycrystal Plasticity: Application to Earing in Cup Drawing , 1996 .

[1016]  R. Radev,et al.  About input data selection for the FEM analysis of bulk forming , 2003 .

[1017]  Patrick Ulysse Extrusion die design for flow balance using FE and optimization methods , 2002 .

[1018]  G. K. Lal,et al.  Analysis of cold strip rolling under hydrodynamic lubrication , 1996 .

[1019]  Y. S. Kang,et al.  A Numerical Investigation into Hot Square Die Extrusion of an L-Section Considering the Variation of Die Bearing Length , 1999 .

[1020]  Huseyin Sehitoglu,et al.  Three-dimensional elastic-plastic stress analysis of rolling contact , 2002 .

[1021]  Michael Kaliske,et al.  Material damping simulation of rolling structures , 2003 .

[1022]  E. A. de Souza Neto,et al.  Finite element simulation of the rolling and extrusion of multi-phase materials Application to the rolling of prepared sugar cane , 1998 .

[1023]  Liu Gang,et al.  Study on the drawbead setting of the large deformation area in a trunk lid , 2000 .

[1024]  V. Rudakov,et al.  Mathematical modelling of the stress–strain state in asymmetric flattening of metal band , 2002 .

[1025]  Yang He,et al.  A study of the influence of the friction conditions on the forging process of a blade with a tenon , 2002 .

[1026]  Mica Grujicic,et al.  Crystal plasticity analysis of earing in deep-drawn OFHC copper cups , 2002 .

[1027]  Hamid Zahrouni,et al.  A new approach for a 3D deep drawing using an Asymptotic Numerical method , 2000 .

[1028]  Byung-Min Kim,et al.  Finite element simulation and experiment for extrusion of semi-solid Al 2024 , 2000 .

[1029]  Kyoung Hoan Na,et al.  Finite Element Analysis for the Milli-Forming of Crystalline Materials with Damage , 2002 .

[1030]  Yi Qin,et al.  Material-flow Considerations for the Design of Injection Forging , 1997 .

[1031]  H. K. Moon,et al.  Automatic Simulation of a Sequence of Hot-Former Forging Processes by a Rigid-Thermoviscoplastic , 1998 .

[1032]  Su-Hai Hsiang,et al.  Application of 3D FEM-slab method to shape rolling , 2001 .

[1033]  Dong-Kyun Min,et al.  A study on precision cold forging process improvements for the steering yoke of automobiles by the rigid–plastic finite-element method , 2003 .

[1034]  Rajendram Balendra,et al.  An approach for the forming of large-thickness-flange components by injection forging , 2004 .

[1035]  Zhu Qi,et al.  FE simulation method for a forging system , 1997 .

[1036]  Sang Moo Hwang,et al.  Dimensional Analysis of Hot Strip Rolling for On-line Prediction of Thermo-mechanical Behavior of Roll—Strip System , 2005 .

[1037]  R. W. Evans,et al.  A model describing microstructural evolution for Ni-base superalloy forgings during the cogging process , 1999 .

[1038]  Lin Xinbo,et al.  Flow stress of carbon steel 08F in temperature range of warm-forging , 2003 .

[1039]  John G. Lenard,et al.  Hot rolling of an aluminum alloy using oil/water emulsions , 1997 .

[1040]  D N Moreton,et al.  Plastic loads of cracked forged piping branch junctions: experimental results and comparison with numerical data , 2000 .

[1041]  Yuung-Hwa Lu A study of the finite element stabilized matrix to the hemispherical cup-drawing process , 1996 .

[1042]  J. Hallström A study of wear in closed-die counterblow hammer forging , 1997 .

[1043]  Yong-Taek Im,et al.  Three-dimensional bulk metal forming simulations under a PC cluster environment , 2003 .

[1044]  Wei Chao Huang,et al.  FE Simulation of Grain Size during the Isothermal Forging of a TC6 Titanium Alloy Disc , 2005 .

[1045]  Sergio Tonini Button,et al.  Application of the finite element method in cold forging processes , 2000 .

[1046]  H. Kusiak,et al.  Validation of thermomechanical and microstructural models for niobium steels in hot rolling-drawing , 1996 .

[1047]  Takashi Kuboki,et al.  Design Method of Die Geometry and Pass Schedule by Void Index in Multi-Pass Drawing , 2005 .

[1048]  Hoon Huh,et al.  Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio , 2001 .

[1049]  R. D. Irwin,et al.  Examination on the use of acoustic emission for monitoring metal forging process: A study using simulation technique , 1997 .

[1050]  Yong-Taek Im,et al.  Analysis and die design of flat-die hot extrusion process 2. Numerical design of bearing lengths , 2002 .

[1051]  James D. Lee,et al.  A large-strain elastic-plastic finite element analysis of rolling process , 1998 .

[1052]  Kyung Seop Han,et al.  Finite Element Analysis of Deep Drawing and Ironing Process in the Steel D &I Canmaking , 2000 .

[1053]  Uday S. Dixit,et al.  A rigid-plastic finite element analysis of temper rolling process , 2004 .

[1054]  Christina Berger,et al.  The influence of fillet rolling on fatigue strength : experiment and calculation , 2003 .

[1055]  Naksoo Kim,et al.  A study on process improvements of multi-stage deep-drawing by the finite-element method , 1995 .

[1056]  Simon Ho,et al.  Fatigue analysis of crankshaft sections under bending with consideration of residual stresses , 2005 .

[1057]  K. W. Lilly,et al.  Dynamic simulation and neural network compliance control of an intelligent forging center , 1996, J. Intell. Robotic Syst..

[1058]  R. Krishna Kumar,et al.  Simulation of cold forging using contact and practical adaptive meshing algorithms , 2000 .

[1059]  K. Tamura,et al.  Optimisation of open die forging condition and tool design for ensuring both internal quality and dimensional precision by three-dimensional rigid–plastic finite element analysis , 2003 .

[1060]  S. M. Hwang,et al.  An Integrated FE Process Model for the Prediction of Strip Profile in Flat Rolling , 2003 .

[1061]  K. Zeman,et al.  The influence of some rolling parameters on the residual stresses after rolling , 1996 .

[1062]  J C Prince,et al.  Thermomechanical analysis of a piercing mandrel for the production of seamless steel tubes , 2003 .

[1063]  Trevor A. Dean,et al.  Alternative die designs in net-shape forging of gears , 2004 .

[1064]  John Monaghan,et al.  Deep drawing process: analysis and experiment , 2003 .

[1065]  You-Min Huang,et al.  Influence of the tool clearance in the cylindrical cup-drawing process , 1996 .

[1066]  Yong-Shin Lee,et al.  Mechanical property changes in drawing/extrusion of hardening viscoplastic materials with damage , 1997 .

[1067]  J. R. Dormand,et al.  Efficient variable stiffness methods for cooling of hot-rolled steel sections , 2000 .

[1068]  Laurent Delannay,et al.  Prediction of residual stresses and springback after bending of a textured aluminium plate , 2002 .

[1069]  Terry Sheppard,et al.  Study of surface cracking during extrusion of aluminium alloy AA 2014 , 2004 .

[1070]  K. J. Weinmann,et al.  Formability in non-symmetric aluminium panel drawing using active drawbeads , 1999 .

[1071]  S Natarajan,et al.  A note on deep drawing process: numerical simulation and experimental validation , 2002 .

[1072]  Dong Nyung Lee,et al.  The Influence of Tension on the Development of Rolling Textures , 2000 .

[1073]  T. A. Dean,et al.  Three-Dimensional Finite Element Modelling of Forging of a Titanium Alloy Aerofoil Sectioned Blade , 1999 .

[1074]  D. A. Linkens,et al.  Roll load prediction—data collection, analysis and neural network modelling , 2004 .

[1075]  Yoshiharu Mutoh,et al.  An Evaluation of the Adhesive Strength of the Interface between a Coating and Substrate , 2003 .

[1076]  Bernt J. Leira,et al.  Reliability-based analysis of a stretch-bending process for aluminium extrusions , 1999 .

[1077]  Meng Hua,et al.  FEM simulation of the flat-die preform forging of steel shaft–disc type components by thermal differential heating , 2001 .

[1078]  Guoqun Zhao,et al.  Analysis and design of a new manufacturing process for a support shaft using the finite element method , 2002 .

[1079]  Ramana V. Grandhi,et al.  Computer aided preform design in forging using the inverse die contact tracking method , 1996 .

[1080]  Akira Yoshida,et al.  Rolling contact fatigue of alumina ceramics sprayed roller , 2004 .

[1081]  Man-Soo Joun,et al.  Finite element simulation of the cold forging process having a floating die , 2001 .

[1082]  Eduardo N. Dvorkin,et al.  Finite element analysis of steel rolling processes , 2001 .

[1083]  Ulf Ståhlberg,et al.  A new pore closure concept for the manufacturing of heavy rings , 2001 .

[1084]  XuefengLiu,et al.  Forging process modeling of cone-shaped posts , 2004 .

[1085]  Terry Sheppard,et al.  Prediction of temperature evolution by FEM during multi-pass hot flat rolling of aluminium alloys , 2001 .

[1086]  T. Sheppard,et al.  Computation of substructural strengthening by the integration of metallurgical models into the finite element code , 2003 .

[1087]  Andrzej Rosochowski Technical feasibility of a three-axis force transducer for measuring pressure and friction on the model die surface - prototype development , 2001 .

[1088]  Martin Stockinger,et al.  Microstructure Modeling as a Tool to Optimize Forging of Critical Aircraft Parts , 2004 .

[1089]  Fabrice Schmidt,et al.  Failure prediction for ceramic dies in the hot-forging process using FEM simulation , 1998 .

[1090]  Byung-Min Kim,et al.  Effect of the reduction ratio and inclusion size of wirebreaks in Cu fine wiredrawing , 2003 .

[1091]  Xu,et al.  A simple and reliable contact algorithm for static-implicit FE code , 2000 .

[1092]  Byeongho Kim,et al.  The Application of Neural Networks and Statistical Methods to Process Design in Metal Forming Processes , 1999 .

[1093]  Kozo Osakada,et al.  Measurement of Friction in Cold Upsetting with Mist Lubrication , 2004 .

[1094]  Ulf Ståhlberg,et al.  Behaviour of longitudinal surface cracks in the hot rolling of steel slabs , 1999 .

[1095]  Dong-Yol Yang,et al.  Modelling of void crushing for large-ingot hot forging , 1997 .

[1096]  Motoo Asakawa,et al.  Effect of die approach geometry and bearing length on residual stress after bar drawing , 2002 .

[1097]  Takashi Kuboki,et al.  Effect of die geometry on residual stress level present after bar drawing , 2001 .

[1098]  Robert E. Johnson,et al.  A study of the effect of the process variables in unsymmetrical single-hole and multi-hole extrusion processes , 1998 .

[1099]  Pierre Montmitonnet,et al.  Application of anisotropic viscoplastic behaviour in 3D finite-element simulations of hot rolling , 1996 .

[1100]  Paulo A.F. Martins,et al.  Development of an industrial process for minting a new type of bimetallic coin , 1997 .

[1101]  Yong-Taek Im,et al.  Remeshing for metal forming simulations—Part II: Three‐dimensional hexahedral mesh generation , 2002 .

[1102]  Zbigniew Muskalski,et al.  Determining and Valuation the Zones of Minimal Reserves of Working Capacity for Concave and Convex Die , 2000 .

[1103]  J. K. Lee,et al.  Material Properties of Aluminum Alloy for Accurate Draw-Bend Simulation , 2001 .

[1104]  S. L. Semiatin,et al.  Can Design for Nonisothermal Pancake Forging of Gamma Titanium Aluminide Alloys , 1996 .

[1105]  Ian C. Howard,et al.  Modeling the ductile-brittle transition behavior in thermomechanically controlled rolled steels , 2005 .

[1106]  F. Gabrielli,et al.  Application of a decision making method in the forging condition optimisation for manufacturing automotive components , 1996 .

[1107]  Donna Walker,et al.  Residual stress analysis of aircraft aluminum forgings , 2002 .

[1108]  Lihui Lang,et al.  Key technologies of the simulation of the hydrodynamic deep drawing of irregular parts , 2004 .

[1109]  Giorgio Donzella,et al.  Stress intensity factor range and propagation mode of surface cracks under rolling–sliding contact , 2003 .

[1110]  Rong-Shean Lee,et al.  Application of numerical simulation for wear analysis of warm forging die , 2003 .

[1111]  P. K. Seo,et al.  Forging process analysis with arbitrary shape die in semi-solid material with high solid fraction , 2003 .

[1112]  H Shim,et al.  Optimal blank shape design by the iterative sensitivity method , 2002 .

[1113]  Terry Sheppard,et al.  Simulation of substructural strengthening in hot flat rolling , 2002 .

[1114]  Dong Joon Kim,et al.  The influence of die geometry on the radial extrusion processes , 2001 .

[1115]  Jun Yanagimoto,et al.  Characterization of three-dimensional metal flow in extrusion process , 1996 .

[1116]  C. G. Sun,et al.  A finite element model for the prediction of thermal and metallurgical behavior of strip on run-out-table in hot rolling , 2002 .

[1117]  James B.P. Lim,et al.  Design and development of a general cold-formed steel portal framing system , 2002 .

[1118]  Taylan Altan,et al.  Analysis of axisymmetric cup drawing in relation to friction , 1996 .

[1119]  Henryk Dyja,et al.  Effect of asymmetrical rolling on distribution of flow rate in bimetallic strip rolling , 1999 .

[1120]  Yi Qin,et al.  Computer-aided design of nett-forming by injection forging of engineering components , 1998 .

[1121]  Houman Borouchaki,et al.  Adaptive remeshing for ductile fracture prediction in metal forming , 2002 .

[1122]  J. G. Lenard,et al.  A study of friction during hot rolling of steels , 1997 .

[1123]  Jian Cao,et al.  Analysis of an axisymmetric deep-drawn part forming using reduced forming steps , 2001 .

[1124]  Mark A.M. Bourke,et al.  Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear , 2005 .

[1125]  Kikuo Maeda,et al.  Flaking failure in rolling contact fatigue caused by indentations on mating surface (III): Mechanism of crack growth in the direction opposite to the load-movement , 2002 .

[1126]  Arno Behrens,et al.  Investigations on the Use of Damage Indicating Criteria in FE Simulations of Cold and Semi-Hot Bulk Forging Operations , 2004 .

[1127]  M. Langseth,et al.  Stretch bending of aluminium extrusions for car bumpers , 2000 .

[1128]  John H. Beynon,et al.  Tensile strains ahead of entry into the roll gap , 2003 .

[1129]  Andrew D. Dimarogonas,et al.  THERMAL STRESS OPTIMIZATION IN METAL ROLLING , 1997 .

[1130]  Peter Hartley,et al.  Observations on fracture in axi-symmetric and three-dimensional cold upsetting of brass , 2002 .

[1131]  Andrzej Milenin,et al.  A mathematical model of the formation of the plastic deformation zone in the rolling of rheologically complex metals and alloys , 1996 .

[1132]  S. M Byon,et al.  FEM-based process optimal design in steady-state metal forming considering strain-hardening , 2001 .

[1133]  David A. Tanner,et al.  Retrogression, reaging and residual stresses in 7010 forgings , 1999 .

[1134]  M. Salimi Strain distributions in plane strain deformation through wedge-shaped dies , 2002 .

[1135]  Welf-Guntram Drossel,et al.  FEM-analysis of the friction process in section drawing , 1998 .

[1136]  Shiyou Gao,et al.  Characterization of laser direct deposited metallic parts , 2003 .

[1137]  Victor Vazquez,et al.  Tool life in cold forging – an example of design improvement to increase service life , 2000 .

[1138]  Patrick Ulysse Optimal extrusion die design to achieve flow balance , 1999 .

[1139]  Alexander Kainz,et al.  A novel mixed Eulerian–Lagrangian finite-element method for steady-state hot rolling processes , 2003 .

[1140]  E. Doege,et al.  Accurate friction and heat transfer laws for enhanced simulation models of precision forging processes , 2004 .

[1141]  Reiner Kopp,et al.  Application of a dislocation model for FE-process simulation , 2001 .

[1142]  S.C.V. Lim,et al.  Plane-Strain Backward Extrusion of AZ31 Magnesium Alloy , 2003 .

[1143]  Mahmoud Farzin,et al.  Determination of buckling limit of strain in cold roll forming by the finite element analysis , 2002 .

[1144]  R. Arrieux,et al.  Plastic instability for off-axes loading in deep-drawing operations , 1998 .

[1145]  S. L. Semiatin,et al.  Equal channel angular extrusion of difficult-to-work alloys , 2000 .

[1146]  M. Joun,et al.  Die shape optimal design in three-dimensional shape metal extrusion by the finite element method , 1998 .

[1147]  Moo Young Huh,et al.  Influence of a solution treatment on the evolution of through-thickness texture gradients in dry cold rolled and recrystallized low carbon steel , 2000 .

[1148]  Cecil Armstrong,et al.  Die Shape Compensation in Hot Forging of Titanium Aerofoil Sections , 2002 .

[1149]  Dong-Yol Yang,et al.  Consideration of geometric nonlinearity in rigid—plastic finite element formulation of continuum elements for large deformation , 1997 .

[1150]  Omer Eyercioglu,et al.  Finite element analysis of a cylindrical approach for shrink-fit precision gear forging dies , 2003 .

[1151]  Lirio Schaeffer,et al.  Numerical Simulation using Finite Elements to Develop and Optimize Forging Processes , 2005 .

[1152]  Zhengyi Jiang,et al.  Finite element simulation of cold rolling of thin strip , 2003 .

[1153]  Michał Kleiber,et al.  Response surface method for probabilistic assessment of metal forming failures , 2004 .

[1154]  A Behrens,et al.  Extension of the forming limits in cold and warm forging by the FE based fracture analysis with the integrated damage model of effective stresses , 2002 .

[1155]  Mario Guagliano,et al.  Prediction of the Propagation of an Internal Crack under Rolling Contact Loads by a Weight Function Approach , 2003 .

[1156]  A Hofmann Deep drawing of process optimized blanks , 2001 .

[1157]  Olaf Schenk,et al.  Optimal design of metal forming die surfaces with evolution strategies , 2004 .

[1158]  Kyung K. Choi,et al.  Design Optimization of Springback in a Deepdrawing Process , 2002 .

[1159]  Jie Zhou,et al.  A comparative study on iso-speed extrusion and isothermal extrusion of 6061 Al alloy using 3D FEM simulation , 2001 .

[1160]  Abdalla S. Wifi,et al.  Computer-aided evaluation of workability in bulk forming processes , 1998 .

[1161]  C. Patvardhan,et al.  Optimization of hot extrusion using single objective neuro stochastic search technique , 2000, Proceedings of IEEE International Conference on Industrial Technology 2000 (IEEE Cat. No.00TH8482).

[1162]  Yong-Taek Im,et al.  Finite Element Investigation of Friction Condition in a Backward Extrusion of Aluminum Alloy , 2003 .

[1163]  Paolo Francesco Bariani,et al.  Material Response to Continuously Varying Rate of Straining During Hot Forging Operations , 1999 .

[1164]  Jie Zhou,et al.  3d fem simulation of the thermal events during aa6061 aluminum extrusion , 1999 .

[1165]  Margam Chandrasekaran,et al.  Effect of materials and temperature on the forward extrusion of magnesium alloys , 2004 .

[1166]  Choon Man Lee,et al.  A three-dimensional steady-state finite element analysis of square die extrusion by using automatic mesh generation , 2000 .

[1167]  S. Serajzadeh,et al.  Modelling Work-Roll Temperature Variations in Hot Strip Rolling , 2004 .

[1168]  Zhou,et al.  Effect of Oxide Scale on Interfacial Heat Transfer during Slab Hot Rolling , 2002 .

[1169]  Wolfgang Bleck,et al.  Casting and rolling in one heat , 2002 .

[1170]  Jordan M. Berg,et al.  Optimal open-loop ram velocity profiles for isothermal forging : A variational approach , 1998 .

[1171]  R. Lapovok,et al.  The role of back-pressure in equal channel angular extrusion , 2005 .

[1172]  C. J. Luis,et al.  FEM analysis of equal channel angular processes , 2002 .

[1173]  He Yang,et al.  A 3D rigid–viscoplastic FEM simulation of compressor blade isothermal forging , 2001 .

[1174]  Peter Tiernan,et al.  Experimental and numerical analysis of the deformation in mild steel wire during dieless drawing , 2002 .

[1175]  J.L.Song,et al.  NUMERICAL SIMULATION STUDY ON DEFORMATION UNIFORMITY OF EQUAL CROSS SECTION LATERAL EXTRUSION , 2004 .

[1176]  Jie Zhou,et al.  3D FEM simulation of the whole cycle of aluminium extrusion throughout the transient state and the steady state using the updated Lagrangian approach , 2003 .

[1177]  Andrzej Milenin,et al.  Theoretical and experimental analysis of stress and temperature distributions during the process of rolling bimetallic rods , 2002 .

[1178]  E. B. Marin,et al.  Elastoplastic finite element analyses of metal deformations using polycrystal constitutive models , 1998 .

[1179]  J. Allin,et al.  Deep drawing characteristics of automotive aluminum alloys , 1998 .

[1180]  H. Q Chen,et al.  Research on the casting–forging precision forming process of alternator poles , 2002 .

[1181]  Chung-Gil Kang,et al.  Die design optimization for axisymmetric hot extrusion of metal matrix composites , 2001 .

[1182]  Yoshinori Yoshida,et al.  Prediction of Dimensional Difference of Product from Tool in Cold Backward Extrusion , 2000 .

[1183]  Henryk Dyja,et al.  Theoretical analysis of bimetallic rods extrusion process in double reduction die , 2004 .

[1184]  P. M. Wild,et al.  The Effects of Tooling Imperfections on the Initiation of Wrinkling in Finite Element Modeling of a Deep Drawing Process , 2001 .

[1185]  Jae-Hoon Kang,et al.  Three-dimensional vibration analysis of thick, tapered rods and beams with circular cross-section , 2004 .

[1186]  Kazunari Yoshida,et al.  Growth and Disappearance of Transversal Cracks on Stainless Steel Wire in Wire Drawing , 2004 .

[1187]  J. R. Douglas,et al.  Augmented upper bound element technique for prediction of temperature and strain in forgings , 2004 .

[1188]  刘浪飞,et al.  FEM simulation of extrusion of 3003 alloy tubes , 2000 .

[1189]  J. Dooley,et al.  Secondary motions in straight and tapered channels: Experiments and three-dimensional finite element simulation with a multimode differential viscoelastic model , 1999 .

[1190]  H Dyja,et al.  The thermal–mechanical and microstructural model for the FEM simulation of hot plate rolling , 1999 .

[1191]  Taylan Altan,et al.  Adaptive FEM simulation for prediction of variable blank holder force in conical cup drawing , 2004 .

[1192]  Reiner Kopp,et al.  Microstructural simulation in hot rolling of aluminium alloys , 1996 .

[1193]  Hans Jørgen Roven,et al.  Shear Deformation Properties of Extruded AlZnMg Alloys , 1998 .

[1194]  Hao Nanhai,et al.  Numerical design of the die land for shape extrusion , 2000 .

[1195]  S. L. Semiatin,et al.  Effect of flow softening on ring test calibration curves , 1999 .

[1196]  Thomas Ørts Pedersen,et al.  Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools , 2000 .

[1197]  Henry Valberg,et al.  Finite Element Analysis as a Tool for the Investigation of Backward Cup Extrusion , 2002 .

[1198]  Hartmut Pawelski Friction inhomogeneities in cold rolling , 2002 .

[1199]  S. Stupkiewicz,et al.  A model of third body abrasive friction and wear in hot metal forming , 1999 .

[1200]  Dong-Yol Yang,et al.  Integrated finite element simulation for the hot extrusion of complicated Al alloy profiles , 2001 .

[1201]  Bhavin V. Mehta,et al.  An improved upper bound method for three-dimensional flow analysis in extrusion dies , 2001 .

[1202]  R. Arrieux,et al.  Modelling and analysis of a deep-drawing operation: key factors for successful comparisons between experimental and simulated results , 2004 .

[1203]  B. Villechaise,et al.  A Finite Element Analysis of Crack Initiation and Propagation in a Notched Disk Submitted to Rolling Contact Fatigue , 1998 .

[1204]  Hans Jørgen Roven,et al.  Phenomenological modeling of the mechanical anisotropy in AlZnMg extruded profiles , 1997 .

[1205]  Guoqun Zhao,et al.  Preform die shape design for uniformity of deformation in forging based on preform sensitivity analysis , 2002 .

[1206]  Zhengyi Jiang,et al.  A 3-D Finite Element Analysis of the Rolling of Thin Strip with Friction Variation , 2002 .

[1207]  Kazutake Komori Simulation of deformation and temperature in multi-pass three-roll rolling , 1999 .

[1208]  Andrzej Gontarz,et al.  New method of thread rolling , 2004 .

[1209]  B. H. Hu,et al.  Forming of nanostructured materials -- numerical analysis in equal channel angular extrusion (ecae) of magnesium, aluminium and titanium alloys , 2004, Int. J. Comput. Eng. Sci..

[1210]  Mark Jolly,et al.  Finite element modelling simulation of transverse welding phenomenon in aluminium extrusion process , 2003 .

[1211]  J. S. Gunasekera,et al.  An upper bound elemental technique approach to the process design of axisymmetric forging by forward and backward simulation , 2003 .

[1212]  Tze-Chi Hsu,et al.  The Computer Simulation of Lubricated Cold Rolling Processes , 2001 .

[1213]  K. Pöhlandt,et al.  Neutron and X-ray residual stress analysis of steel parts produced by cold forward extrusion and tube drawing , 1996 .

[1214]  Athanasios G. Mamalis,et al.  Simulation of the precision forging of bevel gears using implicit and explicit FE techniques , 1996 .

[1215]  Y. T. Lin,et al.  A new upper-bound elemental technique approach , 1997 .

[1216]  Kenji Nakanishi,et al.  A hot forging simulation by the volumetrically elastic and deviatorically rigid–plastic finite-element method , 1999 .

[1217]  John Bridgwater,et al.  An investigation of fracture criteria for predicting surface fracture in paste extrusion , 2002 .

[1218]  Terry Sheppard,et al.  Simulation of bridge die extrusion using the finite element method , 2002 .

[1219]  S.-E. Lundberg,et al.  Roll pass design : the key function in control of shape, dimension and mechanical properties of hot rolled products , 1997 .

[1220]  Manabu Gotoh,et al.  A Numerical Investigation of Cup-Forming by the Stretch-Drawing Process-Single and Double Operations , 2000 .

[1221]  S. Thiruvarudchelvan,et al.  Pressure generated in the hydraulic-pressure augmented deep-drawing process , 1998 .

[1222]  Kazumasa Ozawa,et al.  Development and Strength Evaluation of Material for Thermal Striping in Sodium. , 1998 .

[1223]  M. B. Rubin,et al.  Analysis of blank thickening in deep drawing processes using the theory of a Cosserat generalized membrane , 2004 .

[1224]  Chuanjun Huang,et al.  A finite element analysis of strain induced transformation rolling and an experimental study on the grain refinement potential of severe undercooling thermo-mechanical treatment , 2003 .

[1225]  J Lof,et al.  FEM simulations of the extrusion of complex thin-walled aluminium sections , 2002 .

[1226]  Taylan Altan,et al.  Application of the finite element method to predict material flow and defects in the semi-solid forging of A356 aluminum alloys , 1996 .

[1227]  S. M. Roberts,et al.  Finite element modelling of equal channel angular extrusion , 1997 .

[1228]  F. Niang,et al.  Modèle numérique de prédiction de l’adhérence d’une bilame métallique colaminée à froid , 1998 .

[1229]  S Morii,et al.  New approach to calculating a dynamically stable criterion for hot strip mills , 2003 .

[1230]  Rajendram Balendra,et al.  FE analysis of springback and secondary yielding effect during forward extrusion , 2003 .

[1231]  Jonathan A. Dantzig,et al.  High temperature deformation and hot rolling of AA7055 , 2003 .

[1232]  A. Barreau,et al.  Statistical process control of wear phenomenon during metal extrusion process , 2004, Annual Symposium Reliability and Maintainability, 2004 - RAMS.

[1233]  David A. Tanner,et al.  Modelling stress reduction techniques of cold compression and stretching in wrought Aluminium alloy products , 2003 .

[1234]  Shiro Yoshida,et al.  Some experiences of shape‐forming process: experiments and numerical simulations , 1996 .

[1235]  Lihui Lang,et al.  Study on hydromechanical deep drawing with uniform pressure onto the blank , 2004 .

[1236]  V. L. Kolmogorov,et al.  Three-dimensional analysis of the stress–strain state in the process of plastic deformation of metals , 1999 .

[1237]  Paulo A.F. Martins,et al.  Three-dimensional modelling of the vertical-horizontal rolling process , 2003 .

[1238]  Zhengyi Jiang,et al.  A three-dimensional thermo-mechanical finite element model of complex strip rolling considering sticking and slipping friction , 2002 .

[1239]  Sun Sheng,et al.  Preform design in axisymmetric forging by a new FEM-UBET method , 1998 .

[1240]  Paulo A.F. Martins,et al.  Finite element modeling of the initial staged of a hot forging cycle , 2002 .

[1241]  Kunio Hayakawa,et al.  Analysis of Fatigue Crack Initiation and Propagation in Cold Forging Tools by Local Approach of Fracture , 2004 .

[1242]  L Yan NUMERICAL SIMULATION ON FORMING PROCESS OF EAR PORTION OF UPPER CASE , 1998 .

[1243]  Manabu Gotoh,et al.  Investigations of Puckering in the Cylindrical Cup-Drawing. , 1996 .

[1244]  勝芳 平澤,et al.  厚板の押出し-バーリング加工法の開発(機械要素,潤滑,工作,生産管理など) , 2003 .

[1245]  Seung-Woo Kim,et al.  A study of the hydrostatic extrusion of copper-clad aluminium tube , 1997 .

[1246]  Fred J. Vermolen,et al.  A Model of the β-AlFeSi to α-Al(FeMn)Si Transformation in Al-Mg-Si Alloys , 2003 .

[1247]  Rajendram Balendra,et al.  Analysis of temperature and component form-error variation with the manufacturing cycle during the forward extrusion of components , 2004 .

[1248]  Robert L. Taylor,et al.  A general three‐dimensional contact procedure for implicit finite element codes , 1998 .

[1249]  Jan Olov Perä Optimization of groove design for rolling of long products , 2003 .

[1250]  S. M. Hwang,et al.  Application of a genetic algorithm to the optimal design of the die shape in extrusion , 1997 .

[1251]  Leon M Keer,et al.  A Simplified Direct Method for Cyclic Strain Calculation: Repeated Rolling/Sliding Contact on a Case-Hardened Half Plane , 1995 .

[1252]  Zhiliang Zhang,et al.  Optimum Design of Fatigue Strength of a Cold Extrusion Compound Container , 2005 .

[1253]  Terry Sheppard,et al.  Simulation and control of microstructure evolution during hot extrusion of hard aluminium alloys , 2003 .

[1254]  Miaoquan Li,et al.  Effect of process parameters on microstructural variables of a commercial TC6 titanium alloy disc , 2005 .

[1255]  Dong-Yol Yang,et al.  Process modification of bevel gear forging using three-dimensional finite element analysis , 2001 .

[1256]  Lihui Lang,et al.  Investigation into the effect of pre-bulging during hydromechanical deep drawing with uniform pressure onto the blank , 2004 .

[1257]  Shi Qiang Lu,et al.  FEM Simulation Study for Rapid Preforming of Axisymmetrical Forging by Differential Heating , 2002 .

[1258]  Yong Hwan Kim,et al.  FE-based On-line Model for the Prediction of Roll Force and Roll Power in Hot Strip Rolling , 2000 .

[1259]  Nanhai Hao Numerical design of die land for shape extrusion , 2001 .

[1260]  张海明,et al.  An Approach to Determine Tool Speed for Cylindrical Part Drawing , 2001 .

[1261]  Morten Rikard Jensen,et al.  Aspects of Finite Element Simulation of Axi-Symmetric Hydromechanical Deep Drawing , 1999 .

[1262]  Robert W Bielenberg,et al.  Indenting, buckling and piercing of aluminum beverage cans , 2001 .

[1263]  Paulo A.F. Martins,et al.  Three-dimensional modelling of forging processes by the finite element flow formulation , 2004 .

[1264]  Trevor A. Dean,et al.  Aspects of forging of titanium alloys and the production of blade forms , 2001 .

[1265]  Hyung-Ho Jo,et al.  Determination of welding pressure in the non-steady-state porthole die extrusion of improved Al7003 hollow section tubes , 2003 .

[1266]  Hans-Peter Gänser,et al.  Free-surface ductility in bulk forming processes , 2001 .

[1267]  F. Jourdan,et al.  A Gauss-Seidel like algorithm to solve frictional contact problems , 1998 .

[1268]  Fabrice Schmidt,et al.  Numerical simulation of failure prediction for ceramic tools: comparison with forging test results , 1997 .

[1269]  S. J. Hardy,et al.  Three-dimensional hot rolling model for prediction of camber generation , 2002 .

[1270]  J. Mackerle MAKEBASE, an information retrieval system in structural mechanics for main‐frames and personal computers , 1989 .

[1271]  A. N. Bramley,et al.  Forging preform design using a reverse simulation approach with the upper bound finite element procedure , 2000 .

[1272]  Kunio Hayakawa,et al.  A Study of the Lubrication Behavior of Solid Lubricants in the Upsetting Process , 2000 .

[1273]  Taylan Altan,et al.  Virtual processing – application of rapid prototyping for visualization of metal forming processes , 2000 .

[1274]  Jan Lasson Andreasen,et al.  Prediction of limits of lubrication in strip reduction testing , 2004 .

[1275]  Daan M. Maijer,et al.  Modelling of microstructure evolution during hot rolling of AA5083 using an internal state variable approach integrated into an FE model , 2005 .

[1276]  Henryk Dyja,et al.  The influence of the thickness of a bimetallic layer (18G2A+0H18N10T) on the distribution of the relative flow rate in asymmetrical rolling , 2003 .

[1277]  M. Terčelj,et al.  Suitability of CAE neural networks and FEM for prediction of wear on die radii in hot forging , 2003 .

[1278]  Kouichi Kuroda,et al.  Experimentally Based Study on the Effect of Initial Grain Size for Characterization of the Grain Coarsening Phenomenon During Hot Rolling of a Medium Carbon Steel , 2000 .

[1279]  JiaheAi,et al.  3-D thermo-mechanical coupled FEM simulation of continuous hot rolling process of 60SiMnA spring steel bars and rods , 2004 .

[1280]  Jun Yanagimoto,et al.  Characteristics of Deformation in Hot Extrusion Process of Stainless Steel Tube , 1999 .

[1281]  Cijun Shuai,et al.  Stress analysis and optimum design of hot extrusion dies , 2004 .

[1282]  Dong-Yol Yang,et al.  Investigation into non‐steady‐state three‐dimensional helical extrusion of twisted sections by the rigid‐plastic finite element method , 1997 .

[1283]  Katia Mocellin,et al.  A Partly-Explicit Finite Element Formulation for the Forging Process , 2001, Int. J. Comput. Eng. Sci..

[1284]  Reiner Kopp,et al.  Some current development trends in metal-forming technology , 1996 .

[1285]  R. Hambli,et al.  Influence of Material Properties Variation on Damage Evolution During Extrusion Processes , 2002 .

[1286]  Taylan Altan,et al.  Precision shearing of billets—special equipment and process simulation , 1997 .

[1287]  Ramana V. Grandhi,et al.  Studies on optimization of metal forming processes using sensitivity analysis methods , 2004 .

[1288]  Sy-Wei Lo,et al.  A finite element analysis of full film lubricated metal forming process , 2004 .

[1289]  Li Chang Finite Element Analysis for Temperature Field of the Solid Slab During Air-Cooling , 2000 .

[1290]  Wojciech Z. Misiolek,et al.  Impact of Die Geometry on Microhardness and Grain Size of Cold-Drawn Steel Wire , 2004 .

[1291]  Zhi-Qiang Feng,et al.  Rigid-plastic implicit integration scheme for analysis of metal forming , 1996 .

[1292]  Kazunari Yoshida,et al.  Mandrel drawing and plug drawing of shape-memory-alloy fine tubes used in catheters and stents , 2004 .

[1293]  Srečko Glodež,et al.  Simulation of surface pitting due to contact loading , 1998 .

[1294]  Franz Roters Application of the Texture Component Crystal Plasticity FEM to Forming Simulation , 2003 .

[1295]  Niels Bay,et al.  Analysis of flat rolling of superconducting silver/ceramic composites , 2001 .

[1296]  Hartmut Pawelski Comparison of methods for calculating the influence of asymmetry in strip and plate rolling , 2000 .

[1297]  Hyungjun Kim,et al.  A new free surface scheme for analysis of plastic deformation in shape rolling , 2000 .

[1298]  Wang Guang Numerical and experimental study on new cold precision forging technique of spur gears , 2003 .

[1299]  Odd Sture Hopperstad,et al.  Sensitivity of model parameters in stretch bending of aluminium extrusions , 2001 .

[1300]  Yidu Zhang,et al.  Computer simulation of residual stress of cold rolling pre-stretch board , 2004, Fifth World Congress on Intelligent Control and Automation (IEEE Cat. No.04EX788).

[1301]  Yuki Katayama,et al.  Experimental and Theoretical Investigation on Tilting in Bar and Rod Rolling UsingDiamond-Square Pass and Square-Oval Pass , 2003 .

[1302]  Wojciech Z. Misiolek,et al.  The Analysis and Control of Micro-Hardness Distribution During Wire Drawing , 2004 .

[1303]  J. Jonas,et al.  Incorporation of an anisotropic (texture-based) strain-rate potential into three-dimensional finite element simulations , 1997 .

[1304]  E. Hinton,et al.  Computer Aided Design of Profile Extrusion Dies , 1999 .

[1305]  Jong-Bong Kim,et al.  Investigation into hydromechanical reverse redrawing assisted by separate radial pressure—process development and theoretical verification , 1997 .

[1306]  Bin Wang,et al.  Prediction of Stress–Strain Behaviors in Steels Using an Integrated Constitutive, FEM and ANN Model , 2001 .

[1307]  O. Mahrenholtz,et al.  Non-constant coefficient friction models in 3d simulation of drawing processes , 2001 .

[1308]  Sang-Moon Hwang,et al.  Milli-component forming of rectangular cup drawing , 2001 .

[1309]  Baskiyar Rajeev Modelling of the cooling of a structural steel section using the finite element method , 2002 .

[1310]  Reiner Kopp,et al.  Comparison between visioplasticity measurements and finite element computations for tensile tests on cold rolled perforated ferritic chromium steel P92 , 2004 .

[1311]  S. van der Zwaag,et al.  A Comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of Aluminum AA1050 , 2004 .

[1312]  Kenji Tamura,et al.  Optimization of Hot Free Forging Condition for the Uniformity of Forged Shape by Three Dimensional Rigid-plastic Finite Element Analysis , 2001 .

[1313]  Michael B. Prime,et al.  Quenching and Cold-Work Residual Stresses in Aluminum Hand Forgings: Contour Method Measurement and FEM Prediction , 2003 .

[1314]  Feng Jianhua,et al.  Research on the flow stress characteristics of AISI 1006 and AISI 5140 in the temperature range of warm forging by means of thermo-mechanical experiments , 2002 .

[1315]  Dae-Hwan Kim,et al.  Determination of the initial billet geometry for a forged product using neural networks , 1997 .

[1316]  S. H. Chung,et al.  Optimal process design in non-isothermal, non-steady metal forming by the finite element method , 1998 .

[1317]  K. Tamura,et al.  Optimisation of spiral forging process design for ensuring dimensional precision of forged round billets by three-dimensional rigid–plastic finite element analysis , 2003 .

[1318]  Serge Cescotto,et al.  Texture evolution during deep-drawing processes , 2002 .

[1319]  E. N. Chumachenko,et al.  Stress - Strain State of a Blank in Superplastic Bulk Forming under Mutual Influence of Material Rheology and Contact Friction , 1996 .

[1320]  Lu,et al.  3-D RIGID PLASTIC FEM SIMULATION OF EXTRUDING-BULGING PROCESS OF TEE TUBES , 1999 .

[1321]  Said Ahzi,et al.  Simulation of Texture Evolution during Wire Drawing of BSCCO Superconductors , 2002 .

[1322]  Takao Sawada,et al.  Simulation of solidification of lubricant in metal forming , 2003 .

[1323]  Wang Guo-dong,et al.  Theory and experimental research on the process of rolling shape slab , 2002 .

[1324]  S W Wen,et al.  Roll pass evaluation for three-dimensional section rolling using a simplified finite element method , 1997 .

[1325]  Isamu Aoki,et al.  Influence of Punch Geometry on Small Hole Piercing Characteristics , 2004 .

[1326]  Jens C. O. Nielsen,et al.  Out-of-round railway wheels—wheel-rail contact forces and track response derived from field tests and numerical simulations , 2003 .

[1327]  M. H. Chang,et al.  Three-dimensional finite element simulations of various roll's shape during three-roll planetary rolling processes , 2003 .

[1328]  Pasquale Cavaliere,et al.  Isothermal forging of AA2618 reinforced with 20% of alumina particles , 2004 .

[1329]  K. Davey,et al.  A practical method for finite element ring rolling simulation using the ALE flow formulation , 2002 .

[1330]  Hoon Huh,et al.  Draw-bead simulation by an elasto-plastic finite element method with directional reduced integration , 1997 .

[1331]  Yuan Song Zeng Finite Element Simulation and Experimental Research on the Internal Rolling Connection for Titanium Alloy Tubes , 2005 .

[1332]  J. C. Lin Using FEM and neural network prediction on hydrodynamic deep drawing of T-piece maximum length , 2003 .

[1333]  Claudio Testani,et al.  Isothermal Forging Modelling of Aluminium Based Metal Matrix Composites , 2002 .

[1334]  Jie Zhou,et al.  Computer simulated and experimentally verified isothermal extrusion of 7075 aluminium through continuous ram speed variation , 2004 .

[1335]  P. Van Houtte,et al.  Coupled FEM and texture modelling of plane strain extrusion of an aluminium alloy , 1997 .

[1336]  C. J. Van Tyne,et al.  Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using the Finite Element Method , 2002 .

[1337]  Somnath Ghosh,et al.  R-S Adapted Arbitrary Lagrangian-Eulerian Finite Element Method for Metal-Forming Problems with Strain Localization , 1996 .

[1338]  Thierry Chauveau,et al.  Experimental and numerical determination of the intragranular work hardening in a cold rolled multicrystal , 1997 .

[1339]  Rajendram Balendra,et al.  Identification and classification of flow-dependent defects for injection forging of solid billets , 2000 .

[1340]  Ust Beijing Application of Similar Theory to the Computer Simulation of the Tube Drawing , 1999 .

[1341]  R. Radev,et al.  Influence of flash design upon process parameters of hot die forging , 2004 .

[1342]  Jose María Cabrera,et al.  Hot deformation of duplex stainless steels , 2003 .

[1343]  G. Samołyk,et al.  Application of the slip-line field method to the analysis of die cavity filling , 2004 .

[1344]  Mark A.M. Bourke,et al.  Heterogeneity of deformation texture in equal channel angular extrusion of copper , 2004 .

[1345]  Jingyu Shi,et al.  Foil rolling : a new interpretation of experimental results , 2002 .

[1346]  J. Oudin,et al.  Benchmarks for finite element modeling of cold forging processes with elasto-plastic microvoided materials , 1996 .

[1347]  C. J. Van Tyne,et al.  MODELING OF HEATING AND HEAT TREATING CYCLES FOR LARGE FORGINGS , 1996 .

[1348]  M Abo-Elkhier A modified method for lateral spread in thin strip rolling , 2002 .

[1349]  R. Arrieux,et al.  A Method to Predict the Onset of Necking in Numerical Simulation of Deep Drawing Operations , 1996 .

[1350]  Beom-Soo Kang,et al.  Finite element analysis of micro-rolling using grain and grain boundary elements , 2002 .

[1351]  C. Schürer,et al.  Diamond-like carbon : Application in wire and tube drawing ; Numerical simulation by FEM , 1997 .

[1352]  Peter Hartley,et al.  Three-Dimensional Elastic-Plastic Finite-Element Analysis of the Flattening of Wire Between Plain Rolls* , 2001 .

[1353]  Jun Yanagimoto,et al.  FE-based Analysis for the Microstructure Evolution in Hot Bar Rolling , 2000 .