Development of a Tomography Technique for Assessment of the Material Condition of Concrete Using Optimized Elastic Wave Parameters

Concrete is the most ubiquitous construction material. Apart from the fresh and early age properties of concrete material, its condition during the structure life span affects the overall structural performance. Therefore, development of techniques such as non-destructive testing which enable the investigation of the material condition, are in great demand. Tomography technique has become an increasingly popular non-destructive evaluation technique for civil engineers to assess the condition of concrete structures. In the present study, this technique is investigated by developing reconstruction procedures utilizing different parameters of elastic waves, namely the travel time, wave amplitude, wave frequency, and Q-value. In the development of algorithms, a ray tracing feature was adopted to take into account the actual non-linear propagation of elastic waves in concrete containing defects. Numerical simulation accompanied by experimental verifications of wave motion were conducted to obtain wave propagation profiles in concrete containing honeycomb as a defect and in assessing the tendon duct filling of pre-stressed concrete (PC) elements. The detection of defects by the developed tomography reconstruction procedures was evaluated and discussed.

[1]  Wai Lok Woo,et al.  Metal defects sizing and detection under thick coating using microwave NDT , 2013 .

[4]  Youli Quan,et al.  Seismic attenuation tomography using the frequency shift method , 1997 .

[5]  Michael Forde,et al.  Influence of concrete properties on impulse hammer spectrum and compression wave velocity , 1995 .

[6]  V. Sabinin.  AVOA techniques for fracture characterization , 2013 .

[7]  D. G. Aggelis,et al.  Ultrasonic Characterization of the Fiber-Matrix Interfacial Bond in Aerospace Composites , 2013, TheScientificWorldJournal.

[8]  Gilles Corneloup,et al.  Concrete damage evolution analysis by backscattered ultrasonic waves , 2003 .

[9]  Mohd Zamin Jumaat,et al.  Damage detection of SFRC concrete beams subjected to pure torsion by integrating acoustic emission and Weibull damage function , 2016 .

[10]  Dimitrios G. Aggelis,et al.  Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features , 2014 .

[11]  C Colla,et al.  Influence of source frequency on impact-echo data quality for testing concrete structures , 2003 .

[13]  D. Tweeton,et al.  Improved crosshole radar tomography by using direct and reflected arrival times , 2001 .

[14]  Yoshikazu Kobayashi,et al.  Mesh-independent ray-trace algorithm for concrete structure , 2013 .

[16]  Phadungsak Rattanadecho,et al.  Applications of microwave energy in cement and concrete – A review , 2014 .

[17]  K. C. Chang,et al.  Hybrid elastic-wave CT with impact acoustics for single-side measurement in concrete structures , 2016 .

[18]  D. Fratta,et al.  Travel-time tomographic imaging: multi-frequency diffraction evaluation of a medium with a high-contrast inclusion , 2010 .

[19]  Tomoki Shiotani,et al.  Tomographic reconstruction for concrete using attenuation of ultrasound , 2011 .

[20]  T. Shiotani,et al.  Repair evaluation of concrete cracks using surface and through-transmission wave measurements , 2007 .

[21]  Tomoki Shiotani,et al.  Large-scale evaluation of concrete repair by three-dimensional elastic-wave-based visualization technique , 2013 .

[22]  J. Rudlin,et al.  Multiple sensors on pulsed eddy-current detection for 3-D subsurface crack assessment , 2005, IEEE Sensors Journal.

[23]  Angus I. Best,et al.  The relationships between the velocities, attenuations and petrophysical properties of reservoir sedimentary rocks1 , 1994 .

[24]  Krzysztof Schabowicz,et al.  Ultrasonic tomography – The latest nondestructive technique for testing concrete members – Description, test methodology, application example , 2014 .

[25]  Bruce W. Drinkwater,et al.  Novel ray-tracing algorithms in NDE: Application of Dijkstra and A⁎ algorithms to the inspection of an anisotropic weld , 2014 .

[26]  V. Sabinin.  QVOA techniques for fracture characterization , 2013 .

[27]  Tomoki Shiotani,et al.  Integrated non-destructive assessment of concrete structures under flexure by acoustic emission and travel time tomography , 2014 .

[28]  M. Forde,et al.  Review of NDT methods in the assessment of concrete and masonry structures , 2001 .

[29]  Lanbo Liu,et al.  Seismic non-destructive testing on a reinforced concrete bridge column using tomographic imaging techniques , 2005 .