Fine grinding of silicon wafers: a mathematical model for the chuck shape

Fine grinding of silicon wafers is a patented technology to manufacture super flat semiconductor wafers cost-effectively. Two papers on fine grinding were previously published in this journal, one discussed its uniqueness and special requirements, and the other presented the results of a designed experimental investigation. As a follow up, this paper presents a study aiming at overcoming one of the technical barriers that have hindered the widespread application of this technology, namely, the difficulty and uncertainty in chuck preparation. Although the chuck shape is critically important in fine grinding, there are no standard procedures for its preparation. Furthermore, the information on the relation between the set-up parameters and the resulting chuck shape is not readily available. In this paper, a mathematical model for the chuck shape is first developed. Then the model is used to predict the relations between the chuck shape and the set-up parameters. Finally, the results of the pilot experiments to verify the model are discussed.

[1]  Zhijian Pei,et al.  A study on surface grinding of 300 mm silicon wafers , 2002 .

[2]  Zhijian Pei,et al.  Fine grinding of silicon wafers: designed experiments , 2002 .

[3]  Albert J. Shiha,et al.  Precision cylindrical face grinding , 1999 .

[4]  K. V. Ravi.  Materials Quality and Materials Cost - Are they on a Collision Course? , 1999 .

[5]  M. C. Shaw.  Principles of Abrasive Processing , 1996 .

[6]  S. Danyluk,et al.  The influence of backgrinding on the fracture strength of 100 mm diameter (1 1 1) p-type silicon wafers , 1997 .

[7]  Zhaowei Zhong,et al.  Grinding of aspherical SiC mirrors , 1996 .

[8]  C. Mchatton,et al.  Eliminating back grind defects with wet chemical etching , 1998 .

[9]  Peter van Zant.  Microchip fabrication : a practical guide to semiconductor processing , 2004 .

[10]  S. R. Billingsley,et al.  Grinding induced subsurface cracks in silicon wafers , 1999 .

[11]  Zhijian Pei,et al.  Finite element analysis for grinding and lapping of wire-sawn silicon wafers , 2002 .

[12]  Zhaowei Zhong,et al.  Generation of Parabolic and Toroidal Surfaces on Silicon and Silicon-Based Compounds Using Diamond Cup Grinding Wheels , 1994 .

[13]  Zhijian Pei,et al.  Waviness removal in grinding of wire-sawn silicon wafers: 3D finite element analysis with designed experiments , 2004 .

[14]  Zhijian Pei,et al.  Finite element analysis for grinding of wire-sawn silicon wafers: a designed experiment , 2003 .

[15]  Hong-Lim Lee,et al.  A Comparative Study between Total Thickness Variance and Site Flatness of Polished Silicon Wafer , 2001 .

[16]  Zhijian Pei,et al.  Fine grinding of silicon wafers: a mathematical model for grinding marks , 2003 .

[17]  Hans Kurt Tönshoff,et al.  Abrasive Machining of Silicon , 1990 .

[18]  H. Hinzen,et al.  PRECISION GRINDING OF SEMICONDUCTOR WAFERS , 1993 .

[19]  Graham R. Fisher.  Surface Grinding in Silicon Wafer Manufacturing , 2001 .

[20]  G. E. Moore,et al.  The role of Fairchild in silicon technology in the early days of "Silicon Valley" , 1998, Proc. IEEE.

[21]  Zhijian Pei,et al.  Fine grinding of silicon wafers , 2001 .