Effect of cold rolling on microstructure and mechanical properties of pure Zr

[1]  F. Liu,et al.  Microstructural evolution and mechanical properties in Zr705 during the rolling process , 2012 .

[2]  Myung-Hyun Kim,et al.  Effect of pre-straining on low-temperature mechanical behavior of AISI 304L , 2012 .

[3]  Zhibo Zhang,et al.  Effect of strain rate on microstructure evolutions and mechanical properties of cryorolled Zr upon annealing , 2012 .

[4]  K. Edalati,et al.  High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness , 2011 .

[5]  Hongge Yan,et al.  Effect of twinning and dynamic recrystallization on the high strain rate rolling process , 2010 .

[6]  N. Tsuji,et al.  Cu/Zr nanoscaled multi-stacks fabricated by accumulative roll bonding , 2010 .

[7]  Yinglei Li,et al.  High Strain Rate Deformation Behavior of Zirconium at Elevated Temperatures , 2010 .

[8]  I. Beyerlein,et al.  Plastic flow anisotropy of pure zirconium after severe plastic deformation at room temperature , 2009 .

[9]  I. Beyerlein,et al.  On the interaction between slip dislocations and twins in HCP Zr , 2009 .

[10]  G. Gray,et al.  Origin of dislocations within tensile and compressive twins in pure textured Zr , 2009 .

[11]  J. Schoenung,et al.  Strain softening in nanocrystalline or ultrafine-grained metals: A mechanistic explanation , 2008 .

[12]  Rodney J. McCabe,et al.  Role of twinning in the hardening response of zirconium during temperature reloads , 2006 .

[13]  Myung-Ho Kim,et al.  Deformation behavior in Zr702 processed by equal-channel angular pressing at room temperature , 2006 .

[14]  Myung-Ho Kim,et al.  Annealing behavior of Zr702 fabricated by ECAP , 2006 .

[15]  G. Dinda,et al.  Synthesis of bulk nanostructured Ni, Ti and Zr by repeated cold-rolling , 2005 .

[16]  S. Hwang,et al.  Strain path effects on the microstructure evolution and mechanical properties of Zr702 , 2005 .

[17]  Evan Ma,et al.  Tensile properties of in situ consolidated nanocrystalline Cu , 2005 .

[18]  P. Sun,et al.  Mechanical properties of submicron-grained aluminum , 2005 .

[19]  E. Pereloma,et al.  Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes , 2004 .

[20]  Subra Suresh,et al.  Deformation of electrodeposited nanocrystalline nickel , 2003 .

[21]  Y. Bréchet,et al.  On the mechanisms of dynamic recovery , 2002 .

[22]  Xiaolei Wu,et al.  Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP , 2002 .

[23]  M. Shih,et al.  Microstructure and flow stress of copper deformed to large plastic strains , 2001 .

[24]  K. Marthinsen,et al.  On the mechanisms of work hardening and flow-stress saturation , 2000 .

[25]  Alloys,et al.  ASTM Manual on Zirconium and Hafnium , 1977 .