Buckling of laminated composite stiffened panels subjected to in-plane shear : A parametric study

The presence of in-plane loading may cause buckling of stiffened panels. An accurate knowledge of critical buckling load and mode shapes are essential for reliable and lightweight structural design. This paper presents some parametric studies on simply supported laminated composite blade-stiffened panels subjected to in-plane shear loading. A total of 450 models were analyzed using ANSYS 7.1 and a database is prepared for different plate and stiffener combinations. Studies are carried out by changing the panel orthotropy ratio, stiffener depth, pitch length (number of stiffeners), smeared extensional stiffness ratio of stiffener to that of the plate and extensional stiffness to shear stiffness ratio of the plate. Based on the studies, few important parameters influencing the buckling behaviour are identified and guidelines for better stiffener proportioning are developed, which will be helpful for the designer.

[1]  W. J. Stroud,et al.  Buckling loads of stiffened panels subjected to combined longitudinal compression and shear: Results obtained with PASCO, EAL, and STAGS computer programs , 1984 .

[2]  M. P. Nemeth.  Buckling Behavior of Long Symmetrically Laminated Plates Subjected to Shear and Linearly Varying Axial Edge Loads , 1997 .

[3]  Issam E. Harik,et al.  Buckling behavior of stiffened laminated plates , 2002 .

[4]  Teoman Peköz,et al.  The finite element method for thin-walled members-applications , 2003 .

[5]  Edoardo Cosenza,et al.  Local buckling curves for the design of FRP profiles , 2000 .

[6]  N. Iyengar,et al.  Study of interaction curves for composite laminate subjected to in-plane uniaxial and shear loadings , 2004 .

[7]  K. D. Kim,et al.  Buckling behaviour of composite panels using the finite element method , 1996 .

[8]  A. Leissa.  A Review of Laminated Composite Plate Buckling , 1987 .

[9]  J. Loughlan.  A finite strip analysis of the buckling characteristics of some composite stiffened shear panels , 1994 .

[10]  Rolands Rikards,et al.  Analysis for buckling and vibrations of composite stiffened shells and plates , 2001 .

[11]  Zbigniew Kolakowski,et al.  Estimation of load carrying capacity of thin-walled composite structures , 2005 .

[12]  J. Altenbach,et al.  Mechanics of Composite Structural Elements , 2004 .

[13]  J. Loughlan.  The influence of bend–twist coupling on the shear buckling response of thin laminated composite plates , 1999 .

[14]  J. Loughlan,et al.  The buckling of composite stiffened plates with some emphasis on the effects of fibre orientation and on loading configuration , 1993 .

[15]  Teoman T Peköz,et al.  The finite element method for thin-walled members—basic principles , 2003 .

[16]  Michael P. Nemeth,et al.  Buckling behavior of long symmetrically laminated plates subjected to combined loadings , 1992 .

[17]  W. J. Stroud,et al.  Minimum-Mass Design of Filamentary Composite Panels under Combined Loads: Design Procedure Based on Simplified Buckling Equations. , 1976 .

[18]  B. Gangadhara Prusty,et al.  Experimental and theoretical investigations on stiffened and unstiffened composite panels under uniform transverse loading , 2004 .