Fabrication and performance characteristics of optical fiber gratings for sensing applications

Optical fiber gratings, often classified as short-period and long-period fiber gratings according to the magnitude of the period of refractive index modulation along the propagation axis, are increasingly becoming essential components in optical fiber sensors. In this paper, we discuss fabrication techniques and various performance characteristics of the optical fiber gratings employed in the sensor head. Optical fiber gratings can be fabricated using UV lasers based on the photosensitivity effect, CO/sub 2/ laser or electric arc to induce surface deformation and/or stress relaxation, etc. Change of the spectral characteristics of short-period fiber gratings occurs mainly due to variation of the sub-/spl mu/m grating period. Peak wavelength shift due to environmental change and chirp-induced effects like dual peak separation can be effectively utilized for sensing applications. We also discuss control of the temperature sensitivity, dual peak separation, and reduction of the polarization-dependent loss (PDL) of long-period fiber gratings and their application to sensing of various physical quantities.

[1]  Gia-Wei Chern,et al.  Transfer-matrix method based on perturbation expansion for periodic and quasi-periodic binary long-period gratings , 1999 .

[2]  T. Erdogan.  Fiber grating spectra , 1997 .

[3]  M. McCall,et al.  On the application of coupled mode theory for modeling fiber Bragg gratings , 2000, Journal of Lightwave Technology.

[4]  Roger Boudreau,et al.  Real-coded genetic algorithm for Bragg grating parameter synthesis , 2001 .

[5]  Heather Patrick,et al.  Long period fibre gratings for structural bend sensing , 1998 .

[6]  Li Wei,et al.  Phase-shifted Bragg grating filters with symmetrical structures , 1997 .

[7]  Wei-Ping Huang,et al.  A transfer matrix approach based on local normal modes for coupled waveguides with periodic perturbations , 1992 .

[8]  Ian Bennion,et al.  Fibre optic load sensors with high transverse strain sensitivity based on long-period gratings in B/Ge co-doped fibre , 1999 .

[9]  K. Enbutsu,et al.  Polymeric optical waveguide with high thermal stability and its application for optical interconnection , 1999, OFC/IOOC . Technical Digest. Optical Fiber Communication Conference, 1999, and the International Conference on Integrated Optics and Optical Fiber Communication.

[10]  S. Vohra,et al.  Transverse load sensing by use of pi-phase-shifted fiber Bragg gratings. , 1999, Optics letters.

[11]  A. Kersey,et al.  High-resolution fibre-grating based strain sensor with interferometric wavelength-shift detection , 1992 .

[12]  Ephraim Suhir.  Predicted curvatures and stresses in a fiber-optic interconnect subjected to bending , 1996 .

[13]  M. Yamada,et al.  Analysis of almost-periodic distributed feedback slab waveguides via a fundamental matrix approach. , 1987, Applied optics.

[14]  F. Bilodeau,et al.  Photosensitivity in Optical Fibers , 1993 .

[15]  G.M. Williams,et al.  Hybrid fiber Bragg grating/long period fiber grating sensor for strain/temperature discrimination , 1996, IEEE Photonics Technology Letters.

[16]  Byoungho Lee,et al.  Temperature-independent strain sensor using a chirped grating partially embedded in a glass tube , 2000 .

[17]  L. Ferreira,et al.  Simultaneous measurement of strain and temperature using Bragg gratings written in germanosilicate and boron-codoped germanosilicate fibers , 1999, IEEE Photonics Technology Letters.

[18]  Byoungho Lee,et al.  Fiber Bragg grating strain sensor demodulator using a chirped fiber grating , 2001 .

[19]  X. Gu,et al.  Wavelength-division multiplexing isolation fiber filter and light source using cascaded long-period fiber gratings. , 1998, Optics letters.

[20]  L. Poladian,et al.  Simple grating synthesis algorithm. , 2000, Optics letters.

[21]  John E. Sipe,et al.  Long-period fiber gratings as band-rejection filters , 1995 .

[22]  J. Qian,et al.  Gain flattening fibre filters using phase-shifted long period fibre gratings , 1998 .

[23]  A. Yariv.  Coupled-mode theory for guided-wave optics , 1973 .

[24]  Ralph P. Tatam,et al.  Simultaneous independent temperature and strain measurement using in-fibre Bragg grating sensors , 1996 .

[25]  John P. Dakin,et al.  Discrimination between strain and temperature effects using dual-wavelength fibre grating sensors , 1994 .

[26]  Victor Mizrahi,et al.  Ultraviolet laser fabrication of strong, nearly polarization‐independent Bragg reflectors in germanium‐doped silica waveguides on silica substrates , 1994 .

[27]  Ashish Madhukar Vengsarkar,et al.  BAND-REJECTION FIBRE FILTER USING PERIODIC CORE DEFORMATION , 1997 .

[28]  Hwa-Yaw Tam,et al.  Simultaneous strain and temperature measurement using a single fibre Bragg grating , 2000 .

[29]  Byeong Ha Lee,et al.  Fibre-optic sensing applications of a pair of long-period fibre gratings , 2001 .

[30]  R. Kashyap,et al.  Enhanced UV photosensitivity in boron codoped germanosilicate fibres , 1993 .

[31]  A. Sharma,et al.  Modified Talbot interferometer for fabrication of fiber-optic grating filter over a wide range of Bragg wavelength and bandwidth using a single phase mask , 2001 .

[32]  L. Reekie,et al.  Novel interrogating system for fibre Bragg grating sensors using an acousto-optic tunable filter , 1993 .

[33]  A. Vengsarkar,et al.  Optical fiber long-period grating sensors. , 1996, Optics letters.