Concept for development of stochastic databases for building performance simulation – A material database pilot project

Abstract Probabilistic assessment of hygrothermal performance of building components has received increasing attention by recently published research. Compared to deterministic simulation, probabilistic simulation provides a wide range of possibilities that could cover unexpected scenarios. The inputs' uncertainties determine the corresponding range and distribution of simulation outputs. However, the lack of knowledge of input variability becomes one of the obstacles in the risk assessment. In this paper the concept of a stochastic material database for probabilistic building performance simulation was developed and illustrated. The source of uncertainty in the material data was addressed and uncertainty in different data levels was analyzed. In addition to specific materials, generic materials which have the common characteristics of one type of specific material were also included in the database, to take into consideration the situations in which the specific materials of concern are not well known. It is essential that when performing data sampling the correlations between material parameters and the interrelations between material parameters and material functions are taken into account. Probability distributions of material properties in different material categories were analyzed with statistical tests.

[1]  Jianhua Zhao,et al.  Development of a Novel Statistical Method and Procedure for Material Characterization and a Probabilistic Approach to Assessing the Hygrothermal Performance of Building Enclosure Assemblies , 2012 .

[2]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[3]  Mike Ramsey,et al.  Measurement uncertainty arising from sampling: a guide to methods and approaches , 2007 .

[4]  Kevin J. Lomas,et al.  Sensitivity analysis techniques for building thermal simulation programs , 1992 .

[5]  Joseph Andrew Clarke,et al.  A rational approach to the harmonisation of the thermal properties of building materials , 2009 .

[6]  Jlm Jan Hensen,et al.  Uncertainty analysis for conceptual building design - a review of input data , 2006 .

[7]  Sheldon M. Ross.  Introduction to Probability Models. , 1995 .

[8]  Andreas Nicolai,et al.  Stochastic study of hygrothermal performance of a wall assembly—The influence of material properties and boundary coefficients , 2011, HVAC&R Research.

[9]  Jiawei Han,et al.  Data Mining: Concepts and Techniques , 2000 .

[10]  Mark Bomberg,et al.  Analysis of Selected Water Absorption Coefficient Measurements , 2005 .

[11]  Brent Stephens,et al.  Tools to improve built environment data collection for indoor microbial ecology investigations , 2014 .

[12]  Houcem Eddine Mechri,et al.  Uncertainty and Sensitivity Analysis for Building Energy Rating , 2009 .

[13]  Samuel V. Glass,et al.  Measurements of moisture transport in wood-based materials under isothermal and nonisothermal conditions , 2007 .

[14]  Jan Carmeliet,et al.  A Comparison of Different Techniques to Quantify Moisture Content Profiles in Porous Building Materials , 2004 .

[15]  Andreas Holm,et al.  Practical application of an uncertainty approach for hygrothermal building simulations—drying of an AAC flat roof , 2002 .

[16]  S A Bell,et al.  A beginner's guide to uncertainty of measurement. , 2001 .

[17]  Mark Bomberg,et al.  Towards an Engineering Model of Material Characteristics for Input to Ham Transport Simulations - Part 1: An Approach , 2003 .

[18]  F. Descamps,et al.  A method for the identification and modelling of realistic domestic occupancy sequences for building energy demand simulations and peer comparison , 2014 .

[19]  Gregor Scheffler,et al.  Validation of hygrothermal material modelling under consideration of the hysteresis of moisture storage. , 2007 .

[20]  D. Hand,et al.  Advising on research methods: A consultant's companion , 2011 .

[21]  Jan Carmeliet,et al.  Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components: Benchmarks for One-dimensional Cases , 2004 .

[22]  Hugo S. L. C. Hens.  Vapor Permeability Measurements: Impact of Cup Sealing, Edge Correc-tion, Flow Direction and Mean Relative Humidity, , 2009 .

[23]  Sedat Karaman,et al.  Simulating climatic variables by using stochastic approach , 2007 .

[24]  Christian Struck,et al.  On the Application of Uncertainty and Sensitivity Analysis with Abstract Building Performance Simulation Tools , 2009 .

[25]  R. Iman,et al.  A distribution-free approach to inducing rank correlation among input variables , 1982 .

[26]  Jlm Jan Hensen,et al.  Uncertainty analysis in building performance simulation for design support , 2011 .

[27]  Godfried Augenbroe,et al.  Analysis of uncertainty in building design evaluations and its implications , 2002 .

[28]  J. C. Helton,et al.  Uncertainty and sensitivity analysis in the presence of stochastic and subjective uncertainty , 1997 .

[29]  Nicole Normandin,et al.  Heat, Air, and Moisture Transport Properties of Several North American Bricks and Mortar Mixes , 2004 .

[30]  Carl-Eric Hagentoft,et al.  Probabilistic analysis of air infiltration in low-rise buildings. , 2008 .

[31]  Krystyna Pietrzyk.  Thermal Performance of a Building Envelope - A Probabilistic Approach , 2010 .

[32]  Hyeun Jun Moon,et al.  Assessing Mold Risks in Buildings under Uncertainty , 2009 .

[33]  Brian Everitt,et al.  Cluster analysis , 1974 .

[34]  M. S. De Wit,et al.  Uncertainty in predictions of thermal comfort in buildings , 2001 .

[35]  Darren Robinson,et al.  A bottom-up stochastic model to predict building occupants' time-dependent activities , 2013 .