A two-dimensional model of He/O 2 atmospheric pressure plasma needle discharge

In this paper, a computational modeling study of stream propagation in the atmospheric-pressure helium plasma in ambient atmosphere (oxygen) is presented. A coupled fluid model between time-dependent plasma dynamics and steady state neutral gas flow is employed to provide a fundamental insight into the evolution of the streamers. The obtained simulation results showing that the sheath forms near the dielectric surface and shields the axial stream propagation. The stream front propagates with axial velocity in a range of 104 m/s–105 m/s. And, the increasing accumulated surface charge should be responsible for reducing the propagation velocity of the streamer front in the axial direction. Besides, when the gas flow rate is 1.1 standard liter per minute (SLM), we find that the concentration of oxygen drastically increases at a larger radial position near a treated surface. Therefore, Penning ionization by helium metastables and oxygen peaks at an off-axis position, corresponding to the ring-shaped emission profile in cylindrical coordinates. In this case, the simulated results show the ring-shaped ground atomic oxygen density profile near the treated surface (z = 0.5 mm) at a large gas flow rate of 1.1 SLM, which is consistent with the observation in a similar experiment.

[1]  Dezhen Wang,et al.  Two-dimensional numerical study of an atmospheric pressure helium plasma jet with dual-power electrode , 2015 .

[2]  G. Naidis,et al.  Production of active species in cold helium–air plasma jets , 2014 .

[3]  Mounir Laroussi,et al.  Guided ionization waves : theory and experiments , 2014 .

[4]  Xinpei Lu,et al.  On the mechanism of acceleration behavior of plasma bullet , 2014 .

[5]  P. Chu,et al.  Atmospheric pressure plasma jet utilizing Ar and Ar/H2O mixtures and its applications to bacteria inactivation , 2014 .

[6]  D. Liu,et al.  Numerical and experimental study on a pulsed-dc plasma jet , 2014 .

[7]  Z. Cao,et al.  Influence of Penning effect on the plasma features in a non-equilibrium atmospheric pressure plasma jet , 2014 .

[8]  Dezhen Wang,et al.  Two-dimensional modeling of the cathode sheath formation during the streamer-cathode interaction , 2014 .

[9]  Jue Zhang,et al.  A study of oxidative stress induced by non-thermal plasma-activated water for bacterial damage , 2013 .

[10]  Jean-Pierre Boeuf,et al.  Dynamics of a guided streamer (‘plasma bullet’) in a helium jet in air at atmospheric pressure , 2013 .

[11]  L. Raja,et al.  Self-consistent two-dimensional modeling of cold atmospheric-pressure plasma jets/bullets , 2012 .

[12]  J. Paillol,et al.  Positive streamer formation in cathode region of pulsed high-pressure discharges for transversely excited atmosphere laser applications , 2011 .

[13]  D. Graves,et al.  Gas flow dependence of ground state atomic oxygen in plasma needle discharge at atmospheric pressure , 2010 .

[14]  Gregor E. Morfill,et al.  Plasma medicine: an introductory review , 2009 .

[15]  D. Graves,et al.  Neutral gas flow and ring-shaped emission profile in non-thermal RF-excited plasma needle discharge at atmospheric pressure , 2009 .

[16]  M Maarten Steinbuch,et al.  Plasma needle for in vivo medical treatment: recent developments and perspectives , 2006 .

[17]  David R. Drake,et al.  Gas flow dependence for plasma-needle disinfection of S. mutans bacteria , 2006 .

[18]  Bin Liu,et al.  Killing of S. mutans Bacteria Using a Plasma Needle at Atmospheric Pressure , 2006, IEEE Transactions on Plasma Science.

[19]  陈广超,et al.  OES study of the gas phase during diamond films deposition in high power DC arc plasma jet CVD system , 2006 .

[20]  Jianjun Shi,et al.  Contrasting characteristics of pulsed and sinusoidal cold atmospheric plasma jets , 2006 .

[21]  L. Pitchford,et al.  Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid models , 2005 .

[22]  Eva Stoffels,et al.  Plasma needle: a non-destructive atmospheric plasma source for fine surface treatment of (bio)materials , 2002 .