Dry reforming of methane to syngas over La-promoted hydrotalcite clay-derived catalysts

Abstract Hydrotalcite-like compounds with general formula [M(II) 1 − x M(III) x (OH) 2 ] x + ( A x / n n − ) mH 2 O, where A n − is the compensation anion, were promoted with lanthanum and used as precursors for active catalysts for dry reforming of methane. Four precursors were prepared by co-precipitation and characterized by X-ray diffraction (XRD) and temperature programmed oxidation (TPO-MS). Three of them showed pure hydrotalcite structure. However, Mg/Al molar ratio of 4 provoked the formation of hydromagnesite phase. N 2 physisorption, X-ray diffraction (XRD), temperature programmed reduction (TPR-MS) and X-ray photoelectron spectroscopy (XPS) provided structural, morphological and compositional information about the catalysts. Post-reaction characterization by TPO-MS and scanning electron microscopy (SEM) was also performed in order to evaluate whether carbon actually deposited during reaction. As Mg/Al molar ratio rose, some properties changed: thermal stability increased, BET surface area, and reducibility of Mg(Ni,Al)O decreased while free or segregated NiO reducibility increased. Even though high Mg/Al molar ratios did not favour catalytic activities, it led to enhanced stability during reaction tests, as a consequence of lower deactivation and/or carbon deposition rates. The best stability was achieved at Mg/Al = 3, during a 120 h test. Reduction of Ni inside Ni(Mg,Al)O phase led to a decrease on catalysts' stability.

[1]  C. Au,et al.  CO2/CH4 Reforming over Ni–La2O3/5A: An Investigation on Carbon Deposition and Reaction Steps , 2000 .

[2]  Fabrizio Cavani,et al.  Hydrotalcite-type anionic clays: Preparation, properties and applications. , 1991 .

[3]  W. Trakarnpruk,et al.  Transesterification of Rice Bran Oil with Methanol Catalyzed by Mg(Al)La Hydrotalcites and Metal/MgAl Oxides , 2009 .

[4]  J. Rostrup-Nielsen New aspects of syngas production and use , 2000 .

[5]  L. Hong,et al.  Effect of calcium addition on catalytic ethanol steam reforming of Ni/Al2O3: II. Acidity/basicity, water adsorption and catalytic activity , 2011 .

[6]  M. Arai,et al.  Preparation and application of nickel-containing smectite-type clay materials for methane reforming with carbon dioxide , 2006 .

[7]  M. Niwa,et al.  Support Effect of Metal Oxide on Rh Catalysts in the CH4-CO2 Reforming Reaction , 2002 .

[8]  W. Stickle,et al.  Handbook of X-Ray Photoelectron Spectroscopy , 1992 .

[9]  Loreto Daza,et al.  Biogas reforming on La-promoted NiMgAl catalysts derived from hydrotalcite-like precursors , 2011 .

[10]  S. Kannan,et al.  Allylbenzene isomerisation over as-synthesized MgAl and NiAl containing LDHs: Basicity-activity relationships , 2010 .

[11]  W. T. Reichle Synthesis of anionic clay minerals (mixed metal hydroxides, hydrotalcite) , 1986 .

[12]  X. Bokhimi,et al.  Preparation and characterization of sol-gel MgAl hydrotalcites with nanocapsular morphology , 2007 .

[13]  R. Bilbao,et al.  CO2 reforming of methane over coprecipitated Ni–Al catalysts modified with lanthanum , 2004 .

[14]  V. Chang,et al.  CO2 reforming of methane to syngas: I: evaluation of hydrotalcite clay-derived catalysts , 1998 .

[15]  Paloma Ferreira-Aparicio,et al.  Development of biogas reforming Ni-La-Al catalysts for fuel cells , 2007 .

[16]  Karen Wilson,et al.  Structure-reactivity correlations in MgAl hydrotalcite catalysts for biodiesel synthesis , 2005 .

[17]  Jixiang Chen,et al.  Synthesis gas production from dry reforming of methane over Ce0.75Zr0.25O2-supported Ru catalysts , 2010 .

[18]  E. Assaf,et al.  Effects of adding La and Ce to hydrotalcite-type Ni/Mg/Al catalyst precursors on ethanol steam reforming reactions , 2010 .

[19]  W. Yoon,et al.  Coke study on MgO-promoted Ni/Al2O3 catalyst in combined H2O and CO2 reforming of methane for gas to liquid (GTL) process , 2008 .

[20]  W. Lee,et al.  Partial Oxidation of Methane to Syngas over Calcined Ni–Mg/Al Layered Double Hydroxides , 2002 .

[21]  X. Verykios,et al.  Carbon dioxide reforming of methane to synthesis gas over supported Ni catalysts , 1994 .

[22]  C. Au,et al.  Carbon deposition and catalyst stability over La2NiO4/γ-Al2O3 during CO2 reforming of methane to syngas , 2003 .

[23]  S. Tang,et al.  Effect of supports on the carbon deposition of nickel catalysts for methane reforming with CO2 , 1995 .

[24]  S. Tsang,et al.  Reforming of CH4 with CO2 over Rh/H‐Beta: Effect of Rhodium Dispersion on the Catalytic Activity and Coke Resistance , 2010 .

[25]  H. Fjellvåg,et al.  Characterization of Ni on La modified Al2O3 catalysts during CO2 reforming of methane , 1997 .

[26]  Xiaoming Zheng,et al.  The deposition of coke from methane on a Ni/MgAl2O4 catalyst , 2007 .

[27]  M. A. Lansarin,et al.  Effect of composition and thermal pretreatment on properties of Ni–Mg–Al catalysts for CO2 reforming of methane , 2006 .

[28]  T. Nejat Veziroglu,et al.  “Green” path from fossil-based to hydrogen economy: An overview of carbon-neutral technologies , 2008 .

[29]  S. Kang,et al.  The nature of the thermal decomposition of a catalytically active anionic clay mineral , 1986 .

[30]  Jens R. Rostrup-Nielsen,et al.  CO2-Reforming of Methane over Transition Metals , 1993 .

[31]  J. Assaf,et al.  La1−xCaxNiO3 Perovskite Oxides: Characterization and Catalytic Reactivity in Dry Reforming of Methane , 2008 .

[32]  Jurka Batista,et al.  Efficient catalytic abatement of greenhouse gases: Methane reforming with CO2 using a novel and thermally stable Rh–CeO2 catalyst , 2012 .

[33]  E. Ruckenstein,et al.  Carbon dioxide reforming of methane over nickel alkaline earth metal oxide catalysts , 1995 .

[34]  L. Hong,et al.  Effect of calcium addition on catalytic ethanol steam reforming of Ni/Al2O3: I. Catalytic stability, electronic properties and coking mechanism , 2011 .

[35]  Antonio J. Martín,et al.  Biogas reforming over La-NiMgAl catalysts derived from hydrotalcite-like structure: Influence of calcination temperature , 2011 .

[36]  X. Verykios Catalytic dry reforming of natural gas for the production of chemicals and hydrogen , 2003 .

[37]  C. Au,et al.  Sol–Gel-Generated La2NiO4 for CH4/CO2 Reforming , 2003 .

[38]  Jae-Woo Kim,et al.  Carbon dioxide reforming of methane over Ni incorporated into Ce–ZrO2 catalysts , 2004 .

[39]  Miroslaw L. Wyszynski,et al.  Biogas upgrade to syn-gas (H 2CO) via dry and oxidative reforming , 2011 .

[40]  Peter Styring,et al.  Adsorption of carbon dioxide on hydrotalcite-like compounds of different compositions , 2011 .

[41]  T. Pinnavaia,et al.  Water content and particle texture of synthetic hydrotalcite-like layered double hydroxides , 1995 .

[42]  M. Gazzano,et al.  Hydrotalcite-type anionic clays as precursors of high-surface-area Ni/Mg/Al mixed oxides , 1995 .

[43]  A. Al-Fatesh,et al.  Effects of Selected Promoters on Ni/Y-Al2O3 Catalyst Performance in Methane Dry Reforming , 2011 .

[44]  Yu-he Wang,et al.  Durable Ni/MgO catalysts for CO2 reforming of methane: Activity and metal–support interaction , 2009 .

[45]  S. Ardizzone,et al.  Magnesium salts and oxide: an XPS overview , 1997 .

[46]  Hai-Yan Wang,et al.  Nano-MgO: novel preparation and application as support of Ni catalyst for CO2 reforming of methane , 2001 .

[47]  M. Bradford,et al.  CO2 Reforming of CH4 , 1999 .

[48]  H. Martínez,et al.  Acid–base properties of Mg–Ni–Al mixed oxides using LDH as precursors , 2001 .

[49]  F. Medina,et al.  Activation under oxidizing and reducing atmospheres of Ni-containing layered double hydroxides , 1997 .

[50]  A. Bhattacharya,et al.  Surface reactivity of aluminas prepared by different techniques , 1999 .

[51]  J. A. Taylor,et al.  Empirical atomic sensitivity factors for quantitative analysis by electron spectroscopy for chemical analysis , 1981 .

[52]  J. Ross,et al.  The effect of lanthanum additives on the catalytic activities of Ni-Al2O3 coprecipitated catalysts for the methanation of carbon monoxide , 1984 .