Fluid-driven cracks in an elastic matrix in the toughness-dominated limit

The dynamics of fluid-driven cracks in an elastic matrix is studied experimentally. We report the crack radius R(t) as a function of time, as well as the crack shapes w(r,t) as a function of space and time. A dimensionless parameter, the pressure ratio Δpf/Δpv, is identified to gauge the relative importance between the toughness (Δpf) and viscous (Δpv) effects. In our previous paper (Lai et al. 2015 Proc. R. Soc. A 471, 20150255. (doi:10.1098/rspa.2015.0255)), we investigated the viscous limit experimentally when the toughness-related stresses are negligible for the crack propagation. In this paper, the experimental parameters, i.e. Young’s modulus E of the gelatin, viscosity μ of the fracturing liquid and the injection flow rate Q, were chosen so that the viscous effects in the flow are negligible compared with the toughness effects, i.e. Δpf/Δpv≫1. In this limit, the crack dynamics can be described by the toughness-dominated scaling laws, which give the crack radius R(t)∝t2/5 and the half maximum crack thickness W(t)∝t1/5. The experimental results are in good agreement with the predictions of the toughness scaling laws: the experimental data for crack radius R(t) for a wide range of parameters (E,μ,Q) collapse after being rescaled by the toughness scaling laws, and the rescaled crack shapes w(r,t) also collapse to a dimensionless shape, which demonstrates the self-similarity of the crack shape. The appropriate choice of the viscous or toughness scaling laws is important to accurately describe the crack dynamics. This article is part of the themed issue ‘Energy and the subsurface’.

[1]  Michael P. Cleary,et al.  IMPLICATIONS OF RECENT LABORATORY EXPERIMENTAL RESULTS FOR HYDRAULIC FRACTURES , 1991 .

[2]  M. King Hubbert,et al.  Mechanics of Hydraulic Fracturing , 1972 .

[3]  Howard A. Stone,et al.  Experimental study on penny-shaped fluid-driven cracks in an elastic matrix , 2015, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  Antonio DeSimone,et al.  Hydraulic Fracture and Toughening of a Brittle Layer Bonded to a Hydrogel. , 2015, Physical review letters.

[5]  A. Khristianovic Zheltov,et al.  3. Formation of Vertical Fractures by Means of Highly Viscous Liquid , 1955 .

[6]  J. Joseph,et al.  Fourier transforms , 2012 .

[7]  T. Menand,et al.  The propagation of a buoyant liquid‐filled fissure from a source under constant pressure: An experimental approach , 2002 .

[8]  Leon M Keer,et al.  Growth rate of a penny-shaped crack in hydraulic fracturing of rocks , 1976 .

[9]  H. Stone,et al.  Fracture Propagation Driven by Fluid Outflow from a Low-Permeability Aquifer , 2012, Transport in Porous Media.

[10]  E. D. Giuseppe,et al.  Gelatins as rock analogs: A systematic study of their rheological and physical properties , 2009 .

[11]  A. Bunger,et al.  A Detailed Comparison of Experimental and Numerical Data on Hydraulic Fracture Height Growth Through Stress Contrasts , 2009 .

[12]  B. Cobb,et al.  An Experimental Approach , 1957 .

[13]  Emmanuel M Detournay,et al.  Mechanics of Hydraulic Fractures , 2016 .

[14]  Mingming Wu,et al.  Effects of gel thickness on microscopic indentation measurements of gel modulus. , 2011, Biophysical journal.

[15]  Emmanuel M Detournay,et al.  Propagation of a penny-shaped fluid-driven fracture in an impermeable rock: Asymptotic solutions , 2002 .

[16]  R. Sparks,et al.  An experimental investigation of sill formation and propagation in layered elastic media , 2006 .

[17]  Allan M. Rubin,et al.  Propagation of Magma-Filled Cracks , 1995 .

[18]  Emmanuel M Detournay,et al.  Experimental validation of the tip asymptotics for a fluid-driven crack , 2008 .

[19]  John R. Rice,et al.  Mathematical analysis in the mechanics of fracture , 1968 .

[20]  John R. Lister,et al.  Buoyancy-driven fluid fracture: similarity solutions for the horizontal and vertical propagation of fluid-filled cracks , 1990, Journal of Fluid Mechanics.

[21]  A. Bunger A photometry method for measuring the opening of fluid-filled fractures , 2006 .

[22]  Emmanuel M Detournay,et al.  Comparison between laboratory experiments and coupled simulations of saucer-shaped hydraulic fractures in homogeneous brittle-elastic solids , 2013 .

[23]  P. W. Sharp,et al.  Self-similar solutions for elastohydrodynamic cavity flow , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[24]  R. C. Kerr,et al.  Fluid‐mechanical models of crack propagation and their application to magma transport in dykes , 1991 .

[25]  Leen Weijers,et al.  Experimental Verification of Dimensional Analysis for Hydraulic Fracturing , 1994 .

[26]  A. Takada Experimental study on propagation of liquid‐filled crack in gelatin: Shape and velocity in hydrostatic stress condition , 1990 .

[27]  A. Peirce Modeling multi-scale processes in hydraulic fracture propagation using the implicit level set algorithm , 2015 .

[28]  G. Irwin ANALYSIS OF STRESS AND STRAINS NEAR THE END OF A CRACK TRAVERSING A PLATE , 1957 .

[29]  Janine Kavanagh,et al.  Gelatine as a crustal analogue: Determining elastic properties for modelling magmatic intrusions , 2013 .