The Impact of Biodiesel on Particle Number, Size and Mass Emissions from a Euro4 Diesel Vehicle

New European emissions legislation (Euro5) specifies a limit for Particle Number (PN) emissions and therefore drives measurement of PN during vehicle development and homologation. Concurrently, the use of biofuel is increasing in the marketplace, and Euro5 specifies that reference fuel must contain a bio-derived portion. Work was carried out to test the effect of fuels containing different levels of Fatty Acid Methyl Ester (FAME) on particle number, size, mass and composition. Measurements were conducted with a Cambustion Differential Mobility Spectrometer (DMS) to time-resolve sub-micron particles (5-1000nm), and a Horiba Solid Particle Counting System (SPCS) providing PN data from a Euro5-compliant measurement system. To ensure the findings are relevant to the modern automotive business, testing was carried out on a Euro4 compliant passenger car fitted with a high-pressure common-rail diesel engine and using standard homologation procedures. It was found that using FAME decreased total PN emissions, by 16% over the Type I drive cycle (NEDC) for a 30% biodiesel (B30) compared to mineral fuel (B0). FAME also decreased accumulation mode PN and carbonaceous mass, by 20-30% for B30 versus B0, with a consequent reduction in Diesel Particulate Filter loading rate. A 25% increase in the nucleation mode PN was found when using B30 versus B0, and the higher molecular-weight organic mass fraction also increased. Increases in nitrogen oxides when using FAMEcontaining fuels were also confirmed.

[1]  M. Hupa,et al.  Bio-derived fuels may ease the regeneration of diesel particulate traps , 2006 .

[2]  Gordon E. Andrews,et al.  Comparison of Exhaust Emissions and Particulate Size Distribution for Diesel, Biodiesel and Cooking Oil from a Heavy Duty DI Diesel Engine , 2008 .

[3]  A. Munack,et al.  The Influence of Fuel Design on the Exhaust Gas Emissions and Health Effects , 2005 .

[4]  Peter Eastwood,et al.  Particulate Emissions from Vehicles , 2008 .

[5]  B. Buchholz,et al.  A Numerical Investigation into the Anomalous Slight NOx Increase when Burning Biodiesel: A New (Old) Theory , 2007 .

[6]  G. Martini,et al.  Measurement of the Number and Size Distribution of Particle Emissions from Heavy Duty Engines , 2000 .

[7]  N Ladommatos,et al.  Effect of the Molecular Structure of Individual Fatty Acid Alcohol Esters (Biodiesel) on the Formation of Nox and Particulate Matter in the Diesel Combustion Process , 2008 .

[8]  P. Roth,et al.  Effects of Bio Diesel Injection in a DI Diesel Engine on Gaseous and Particulate Emission , 2005 .

[9]  Leonidas Ntziachristos,et al.  Overview of the European “Particulates” Project on the Characterization of Exhaust Particulate Emissions from Road Vehicles: Results for Heavy Duty Engines , 2004 .

[10]  David B. Kittelson,et al.  Exhaust Particle Number and Size Distributions with Conventional and Fischer-Tropsch Diesel Fuels , 2002 .

[11]  Axel Munack,et al.  Influence of Biodiesel and Different Designed Diesel Fuels on the Exhaust Gas Emissions and Health Effects , 2003 .

[12]  Zhijun Wu,et al.  Characteristics of Particulates and Exhaust Gases Emissions of DI Diesel Engine Employing Common Rail Fuel System Fueled with Bio-diesel Blends , 2008 .

[13]  O. Armas,et al.  Fuel Formulation Effects on Passenger Car Diesel Engine Particulate Emissions and Composition , 2000 .

[14]  Konstantinos Boulouchos,et al.  Characterization of Diesel Particulate Emissions in Heavy-Duty DI-Diesel Engines with Common Rail Fuel Injection Influence of Injection Parameters and Fuel Composition , 2001 .

[15]  C. P. Fenimore,et al.  Formation of nitric oxide in premixed hydrocarbon flames , 1971 .

[16]  Juhun Song,et al.  Examination of the oxidation behavior of biodiesel soot , 2006 .

[17]  Juhun Song,et al.  Impact of Biodiesel Blending on Diesel Soot and the Regeneration of Particulate Filters , 2005 .

[18]  Nils-Olof Nylund,et al.  Particle Emissions at Moderate and Cold Temperatures Using Different Fuels , 2003 .

[19]  Jan Czerwinski,et al.  Injection, Combustion and (Nano) Particle Emissions of a Modern HD-Diesel Engine With GTL, RME & ROR , 2007 .

[20]  André L. Boehman,et al.  The Impact of the Bulk Modulus of Diesel Fuels on Fuel Injection Timing , 2004 .

[21]  S. Shuai,et al.  Effects of Different Biodiesels and their Blends with Oxygenated Additives on Emissions from a Diesel Engine , 2008 .