A finite element model on effects of impact load and cavitation on fatigue crack propagation in mechanical bileaflet aortic heart valve

Pyrolytic carbon mechanical heart valves (MHVs) are widely used to replace dysfunctional and failed heart valves. As the human heart beats around 40 million times per year, fatigue is the prime mechanism of mechanical failure. In this study, a finite element approach is implemented to develop a model for fatigue analysis of MHVs due to the impact force between the leaflet and the stent and cavitation in the aortic position. A two-step method to predict crack propagation in the leaflets of MHVs has been developed. Stress intensity factors (SIFs) are computed at a small initiated crack located on the leaflet edge (the worst case) using the boundary element method (BEM). Static analysis of the crack is performed to analyse the stress distribution around the front crack zone when the crack is opened; this is followed by a dynamic crack analysis to consider crack propagation using the finite element approach. Two factors are taken into account in the calculation of the SIFs: first, the effect of microjet formation due to cavitation in the vicinity of leaflets, resulting in water hammer pressure; second, the effect of the impact force between the leaflet and the stent of the MHVs, both in the closing phase. The critical initial crack length, the SIFs, the water hammer pressure, and the maximum jet velocity due to cavitation have been calculated. With an initial crack length of 35 μm, the fatigue life of the heart valve is greater than 60 years (i.e. about 2.2×109 cycles) and, with an initial crack length of 170 μm, the fatigue life of the heart valve would be around 2.5 years (i.e. about 9.1×107 cycles). For an initial crack length greater than 170 μm, there is catastrophic failure and fatigue cracking no longer occurs. A finite element model of fatigue analysis using Patran command language (PCL custom code) in MSC software can be used to evaluate the useful lifespan of MHVs. Similar methodologies can be extended to other medical devices under cyclic loads.

[1]  Carlos Alberto Brebbia,et al.  Static and dynamic fracture mechanics , 1994 .

[2]  R. Barsoum.  On the use of isoparametric finite elements in linear fracture mechanics , 1976 .

[3]  F. J. Heymann,et al.  On the Shock Wave Velocity and Impact Pressure in High-Speed Liquid-Solid Impact , 1968 .

[4]  R O Ritchie,et al.  Cyclic fatigue and fracture in pyrolytic carbon-coated graphite mechanical heart-valve prostheses: role of small cracks in life prediction. , 1994, Journal of biomedical materials research.

[5]  R O Ritchie,et al.  Fatigue life estimation procedures for the endurance of a cardiac valve prosthesis: stress/life and damage-tolerant analyses. , 1986, Journal of biomechanical engineering.

[6]  H Cao,et al.  Mechanical performance of pyrolytic carbon in prosthetic heart valve applications. , 1996, The Journal of heart valve disease.

[7]  G Sines,et al.  Fatigue behavior of a pyrolytic carbon. , 2000, Journal of biomedical materials research.

[8]  H Reul,et al.  Cavitation of mechanical heart valves under physiologic conditions. , 1992, The Journal of heart valve disease.

[9]  Robert O. Ritchie,et al.  Invited Article , 2004 .

[10]  J. Lankford,et al.  Cyclic fatigue and fracture in pyrolytic carbon-coated graphite mechanical heart-valve prostheses: role of small crack in life prediction. , 1995, Journal of biomedical materials research.

[11]  Fotis Sotiropoulos,et al.  Numerical simulation of flow in mechanical heart valves: grid resolution and the assumption of flow symmetry. , 2003, Journal of biomechanical engineering.

[12]  J. Ely,et al.  Pure pyrolytic carbon: preparation and properties of a new material, On-X carbon for mechanical heart valve prostheses. , 1998, The Journal of heart valve disease.

[13]  T Tokuno,et al.  Effects of vaporous cavitation near prosthetic surfaces. , 1981, Transactions - American Society for Artificial Internal Organs.

[14]  K B Chandran,et al.  Cavitation dynamics of medtronic hall mechanical heart valve prosthesis: fluid squeezing effect. , 1996, Journal of biomechanical engineering.

[15]  Luiz Fernando Martha,et al.  Fatigue life and crack path predictions in generic 2D structural components , 2003 .

[16]  R. D. Henshell,et al.  CRACK TIP FINITE ELEMENTS ARE UNNECESSARY , 1975 .

[17]  Ritchie Ro,et al.  Fatigue and fracture of pyrolytic carbon: a damage- tolerant approach to structural integrity and life prediction in "ceramic" heart valve prostheses. , 1996 .

[18]  M T Ahmadian,et al.  Time-dependent analysis of leaflets in mechanical aortic bileaflet heart valves in closing phase using the finite strip method. , 2006, Medical engineering & physics.

[19]  G L Chahine.  Cavitation dynamics at microscale level. , 1994, The Journal of heart valve disease.

[20]  E Wolner,et al.  Leaflet fracture in Edwards-Duromedics bileaflet valves. , 1989, The Journal of thoracic and cardiovascular surgery.

[21]  J. Blake,et al.  Transient cavities near boundaries. Part 1. Rigid boundary , 1986, Journal of Fluid Mechanics.

[22]  Robert O. Ritchie,et al.  Effect of viscous grain bridging on cyclic fatigue-crack growth in monolithic ceramics at elevated temperatures , 1999 .

[23]  K Zhu,et al.  Mechanisms of mechanical heart valve cavitation: investigation using a tilting disk valve model. , 2001, The Journal of heart valve disease.

[24]  R. Gibbons,et al.  ACC/AHA Guidelines for the Management of Patients With Valvular Heart Disease. Executive Summary. A report of the American College of Cardiology/American Heart Association Task Force on Practice Guidelines (Committee on Management of Patients With Valvular Heart Disease). , 1998, The Journal of heart valve disease.

[25]  D B Geselowitz,et al.  Mitral heart valve cavitation in an artificial heart environment. , 1996, The Journal of heart valve disease.

[26]  G Van Nooten,et al.  Leaflet escape of a mitral Duromedics prosthesis. Case report. , 1989, Acta chirurgica Belgica.

[27]  Pietro Cerone,et al.  A note on the impulse due to a vapour bubble near a boundary , 1982, The Journal of the Australian Mathematical Society. Series B. Applied Mathematics.

[28]  Joseph B. Franzini,et al.  Fluid Mechanics with Engineering Applications. 6th Ed. By R. L.DAUGHERTY and J. B. FRANZINI. McGraw-Hill. 1965. 574 pp. $9.95 or 80s. Fluid Dynamics. By J. W. DAILY and D. R. F. HARLEMAN. Addison Wesley. 1966. 454 pp. $12.50 or 94s. , 1967, Journal of Fluid Mechanics.

[29]  G. Chahine,et al.  Effect of cavitation on pyrolytic carbon in vitro. , 1994, The Journal of heart valve disease.

[30]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[31]  A P Yoganathan,et al.  A microstructural flow analysis within a bileaflet mechanical heart valve hinge. , 1996, The Journal of heart valve disease.

[32]  James F. Doyle,et al.  Wave Propagation in Structures: An FFT-Based Spectral Analysis Methodology , 1989 .

[33]  S. Deutsch,et al.  Observation and quantification of gas bubble formation on a mechanical heart valve. , 2000, Journal of biomechanical engineering.

[34]  Kazuyoshi Takayama,et al.  Mechanism of impact pressure generation from spark-generated bubble collapse near a wall , 1983 .

[35]  D B Geselowitz,et al.  A method for real-time in vitro observation of cavitation on prosthetic heart valves. , 1994, Journal of biomechanical engineering.

[36]  E. Tatou,et al.  Fracture-embolization of duromedics valve prosthesis and microscopic uncommon lesions. , 2001, Annals of Thoracic Surgery.

[37]  R. Gibbons,et al.  Guidelines for the Management of Patients With Valvular Heart Disease Executive Summary A Report of the American College of Cardiology/American Heart Association Task Force on Practice Guidelines (Committee on Management of Patients With Valvular Heart Disease) , 1998 .

[38]  Ashok Saxena,et al.  Nonlinear Fracture Mechanics for Engineers , 1998 .

[39]  R O Ritchie,et al.  Fatigue-crack propagation in Nitinol, a shape-memory and superelastic endovascular stent material. , 1999, Journal of biomedical materials research.