Mixed LW/ESL models for the analysis of sandwich plates with composite faces

Abstract In this paper, a new set of models in the framework of Carrera’s Unified Formulation (CUF) is presented for the static analysis of sandwich plates. Concerning the study of multilayered structures, it is important to fulfill the interlaminar continuity conditions for the transverse stresses. For this aim, the CUF has been conceived by allowing to handle in a unified manner many theories that can differ by the order of expansion and the variables description in the thickness direction. This last can be Equivalent-Single-Layer (ESL), if the variables are assumed for the whole laminate, or Layer-Wise (LW), if the variables are described independently for each layer. The models considered in this work are derived from the Reissner Mixed Variational Theorem (RMVT) in order to model a priori the transverse shear and normal stresses. If sandwich plates with composite faces are considered, the transverse stresses are described as LW while the displacements are assumed ESL in the faces and LW at sandwich level (faces + core). This procedure permits to save degrees of freedom, preserving the same accuracy of a full layer-wise description. The new formulation is implemented in the framework of finite element analysis. Comparisons are made with 3D results.

[1]  T. M. Nordstrand.  Parametric study of the post-buckling strength of structural core sandwich panels , 1995 .

[2]  Pappu L. N. Murthy,et al.  Composite sandwich thermostructural behavior - Computational simulation , 1986 .

[3]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[4]  Maenghyo Cho,et al.  Efficient higher order composite plate theory for general lamination configurations , 1993 .

[5]  H. G. Allen.  Analysis and design of structural sandwich panels , 1969 .

[6]  K. Bathe,et al.  A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation , 1985 .

[7]  J. Ren,et al.  A new theory of laminated plate , 1986 .

[8]  J. Reddy.  Mechanics of laminated composite plates and shells : theory and analysis , 1996 .

[9]  Paolo Gaudenzi,et al.  A finite element evaluation of single-layer and multi-layer theories for the analysis of laminated plates , 1995 .

[10]  Mats Heder.  Buckling of sandwich panels with different boundary conditions — A comparison between FE-analysis and analytical solutions , 1991 .

[11]  E. Carrera.  A refined multilayered finite-element model applied to linear and non-linear analysis of sandwich plates , 1998 .

[12]  O. C. Zienkiewicz,et al.  Reduced integration technique in general analysis of plates and shells , 1971 .

[13]  E. Carrera.  Theories and Finite Elements for Multilayered Plates and Shells:A Unified compact formulation with numerical assessment and benchmarking , 2003 .

[14]  Antonio Tralli,et al.  A refined theory for laminated beams: Part I—A new high order approach , 1993 .

[15]  Erasmo Carrera,et al.  Elastodynamic Behavior of Relatively Thick, Symmetrically Laminated, Anisotropic Circular Cylindrical Shells , 1992 .

[16]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[17]  E. Carrera,et al.  Zig-Zag and interlaminar equilibria effects in large deflection and postbuckling analysis of multilayered plates , 1997 .

[18]  Erasmo Carrera,et al.  A Survey With Numerical Assessment of Classical and Refined Theories for the Analysis of Sandwich Plates , 2009 .

[19]  J. Z. Zhu,et al.  The finite element method , 1977 .

[20]  Erasmo Carrera,et al.  Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 1: Derivation of finite element matrices , 2002 .

[21]  Liviu Librescu,et al.  Analysis of symmetric cross-ply laminated elastic plates using a higher-order theory. II - Buckling and free vibration , 1988 .

[22]  Ahmed K. Noor,et al.  Three-dimensional solutions for thermomechanical stresses in sandwich panels and shells , 1994 .

[23]  Erasmo Carrera,et al.  Assessment of Plate Elements on Bending and Vibrations of Composite Structures , 2002 .

[24]  Erasmo Carrera,et al.  Classical and advanced multilayered plate elements based upon PVD and RMVT. Part 2: Numerical implementations , 2002 .

[25]  J. Reddy.  A Simple Higher-Order Theory for Laminated Composite Plates , 1984 .

[26]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[27]  Erasmo Carrera,et al.  Multilayered Finite Plate Element based on Reissner Mixed Variational Theorem. Part I: Theory., , 2002 .

[28]  Y. J. Lin,et al.  A Note on a Non-Linear Theory on Bending of Orthotropic Sandwich Plates , 1968 .

[29]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[30]  Erasmo Carrera,et al.  Multilayered Finite Plate Element based on Reissner Mixed Variational Theorem. Part II: Numerical Analysis, , 2002 .

[31]  A. Rao,et al.  Bending, vibration and buckling of simply supported thick orthotropic rectangular plates and laminates , 1970 .

[32]  G. Kirchhoff,et al.  Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. , 1850 .

[33]  E. Carrera.  C0 REISSNER–MINDLIN MULTILAYERED PLATE ELEMENTS INCLUDING ZIG-ZAG AND INTERLAMINAR STRESS CONTINUITY , 1996 .

[34]  J. F. Mccarthy,et al.  Large deflection of sandwich plates with orthotropic cores , 1964 .

[35]  Ahmed K. Noor,et al.  Computational Models for Sandwich Panels and Shells , 1996 .

[36]  E. Carrera.  Layer-Wise Mixed Models for Accurate Vibrations Analysis of Multilayered Plates , 1998 .

[37]  E. Reissner,et al.  Finite Deflections of Sandwich Plates , 1948 .

[38]  Tarun Kant,et al.  Higher-order shear deformable theories for flexure of sandwich plates—Finite element evaluations , 1988 .

[39]  Ahmed K. Noor,et al.  Assessment of computational models for multilayered anisotropic plates , 1990 .

[40]  E. Reissner.  On a certain mixed variational theorem and a proposed application , 1984 .

[41]  Erasmo Carrera.  A class of two-dimensional theories for anisotropic multilayered plates analysis , 1995 .

[42]  E. Reissner.  The effect of transverse shear deformation on the bending of elastic plates , 1945 .