Micromachined Inertial Sensors: The State-of-the-Art and a Look into the Future

In the paper a review is given of the current state of the art of micromachined inertial sensors accelerometers and gyroscopes. These sensors can be used in a wide range of applications and micromachined devices have a number of significant advantages over their conventional counterparts such as lower cost, smaller form factor and lower power consumption. An overview will be given over the diverse technical implementations which can be classified by the manufacturing process, the type of transduction mechanism, and the type of control system. While micromachined accelerometers are already commercially available from a range of companies, gyroscopes are subject to intensive research worldwide and a series of problems remains to be resolved. A novel approach to inertial sensing, currently under investigation at Southampton University, is introduced which relies on electrostatic levitation and has the potential to overcome some inherent drawbacks of prevailing concepts.

[1]  Michael Kraft,et al.  Closed Loop Silicon Accelerometers , 1998 .

[2]  K. Najafi,et al.  An all-silicon single-wafer fabrication technology for precision microaccelerometers , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[3]  Roger T. Howe,et al.  Surface micromachined accelerometers , 1996 .

[4]  Michael Kraft.  Closed loop digital accelerometer employing oversampling conversion , 1997 .

[5]  David W. Burns,et al.  Sealed-cavity resonant microbeam accelerometer , 1996 .

[6]  L.M. Roylance,et al.  A batch-fabricated silicon accelerometer , 1979, IEEE Transactions on Electron Devices.

[7]  T. Kenny,et al.  A miniature, high-sensitivity, electron tunneling accelerometer , 1996 .

[8]  Otto Leistiko,et al.  Opto-mechanical accelerometer based on strain sensing by a Bragg grating in a planar waveguide , 1996 .

[9]  Walter Lang,et al.  A new silicon rate gyroscope , 1999 .

[10]  Bernhard E. Boser,et al.  A three-axis micromachined accelerometer with a CMOS position-sense interface and digital offset-trim electronics , 1999, IEEE J. Solid State Circuits.

[11]  B. Boser,et al.  A monolithic surface micromachined Z-axis gyroscope with digital output , 2000, 2000 Symposium on VLSI Circuits. Digest of Technical Papers (Cat. No.00CH37103).

[12]  Sukhan Lee,et al.  Micromachined inertial sensors , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[13]  Philippe Benabes,et al.  A digital piezoelectric accelerometer with sigma-delta servo technique , 1997 .

[14]  Albert P. Pisano,et al.  Polysilicon integrated microsystems: technologies and applications , 1996 .

[15]  Michael Kraft,et al.  System level simulation of an electrostatically levitated disk , 2000 .

[16]  S. Bouwstra,et al.  Opto-mechanical Accelerometer Based On Strain Sensing By A Bragg Grating In A Planar Waveguide , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[17]  M. W. Putty.  A Maicromachined vibrating ring gyroscope , 1994 .

[18]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[19]  A.P. Pisano,et al.  Dual axis operation of a micromachined rate gyroscope , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).