Current status of the science and technology of vacuum glazing

Abstract This paper reviews the current state-of-the-art of the science and technology of vacuum glazing. The construction of vacuum glazing, and its method of manufacture in the laboratory, is described. Experimental data are presented on the magnitude of heat flows through vacuum glazing. Gaseous heat transfer is negligible, and the internal vacuum is shown to be stable over many years, in well-manufactured glazing. Values of air-to-air, centre-of-glazing thermal conductance have been achieved ranging from 3 W m −2  K −1 (for vacuum glazing with no internal low emittance coating) to 0.8 W m −2  K −1 (for samples with two internal low emittance coatings). The overall heat transport rate through 1 m×1 m samples of vacuum glazing has been measured in accurately calibrated guarded hot box instruments. The results obtained agree to within experimental error (±6%) with those estimated on the basis of local measurements of heat transfer due to radiation, pillar conduction and lateral heat flow through the edge seal. Sources of mechanical tensile stress in vacuum glazing are identified. Stresses due to atmospheric pressure occur in the vicinity of the pillars, and (in poorly designed glazing) near the edge seal. Stresses due to temperature differences are influenced by many factors including the external heat transfer coefficients, level of insulation of the glazing, edge insulation, and edge constraints. Methods of estimating these stresses are discussed. It is shown that vacuum glazing can be designed with adequately low stresses, and low thermal conductance.

[1]  G. M. Turner,et al.  Limits to performance of evacuated glazing , 1994, Other Conferences.

[2]  Errol B. Shand.  Fracture Velocity and Fracture Energy of Glass in the Fatigue Range , 1961 .

[3]  S. W. Freiman,et al.  Effects of water and other dielectrics on crack growth , 1982 .

[4]  A. C. Fischer-Cripps,et al.  Architectural glazings: Design standards and failure models , 1995 .

[5]  D. Arasteh,et al.  Edge conduction in vacuum glazing , 1995 .

[6]  D. Maugis,et al.  Fracture indentation beneath flat and spherical punches , 1985 .

[7]  R. J. Corruccini.  Gaseous heat conduction at low pressures and temperatures , 1959 .

[8]  David K. Benson,et al.  Laser Sealed Evacuated Window Glazings , 1984, Optics & Photonics.

[9]  B. Lawn,et al.  On the theory of Hertzian fracture , 1967, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[10]  John D. Garrison,et al.  Manufacture and cost of vacuum glazing , 1995 .

[11]  Richard Edward Collins,et al.  Design of support pillar arrays in flat evacuated windows , 1991 .

[12]  Philip C. Eames,et al.  Detailed simulation of heat transfer across planar evacuated glazing , 1996 .

[13]  Leon Poladian,et al.  Heat conduction through support pillars in evacuated windows , 1991 .

[14]  Christopher Dey,et al.  Measurement of local heat flow in flat evacuated glazing , 1993 .

[15]  A. C. Fischer-Cripps,et al.  The probability of hertzian fracture , 1994 .

[16]  C. E. Tracy,et al.  Evacuated Window Glazings for Energy Efficient Buildings , 1985, Optics & Photonics.

[17]  D. A. Clugston,et al.  Vacuum glazing—A new component for insulating windows , 1995 .

[18]  Brian R. Lawn,et al.  Crack velocity functions and thresholds in brittle solids , 1990 .

[19]  D. A. Clugston,et al.  Pump down of evacuated glazing , 1994 .

[20]  B. Lawn,et al.  Hertzian Fracture Experiments on Abraded Glass Surfaces as Definitive Evidence for an Energy Balance Explanation of Auerbach's Law , 1969 .

[21]  G. M. Turner,et al.  Stresses and fracture probability in evacuated glazing , 1995 .

[22]  A. C. Fischer-Cripps,et al.  Transparent evacuated insulation , 1992 .

[23]  G. M. Turner,et al.  The measurement and calculation of radiative heat transfer between uncoated and doped tin oxide coated glass surfaces , 1996 .

[24]  Richard Edward Collins,et al.  Measurement of heat flow through vacuum glazing at elevated temperature , 1997 .

[25]  Richard Edward Collins,et al.  Outgassing effects in evacuated glazing , 1994, Other Conferences.

[26]  Brian Norton,et al.  Thermal Properties Of Evacuated Glazing Based On Experimental Solar Simulation And Computer Based Simulation Modelling , 1997 .