Analysis of a scroll machine for micro ORC applications by means of a RE/CFD methodology

Abstract In this paper an integrated Reverse Engineering – Computational Fluid Dynamics (RE/CFD) methodology is applied in order to study the adaptation of a commercial scroll compressor to be used as an expander in a micro ORC system. The analysis consists of the acquisition of a real scroll compressor geometry through an RE procedure, the transient numerical simulation of the scroll in compression and expansion mode and the analysis of the performance in terms of pressure and mass flow rate profiles and volumetric efficiency. In order to set up the numerical strategy, a literature test case is used to perform a sensitivity analysis. The results obtained are: (i) the assessment of a numerical strategy with respect to the most critical parameters of a dynamic mesh-based simulation; (ii) the set up and validation of a Reverse Engineering-based numerical procedure; (iii) the evidence of the different fluid dynamic behavior of the scroll machine in compressor mode compared to the expander mode and (iv) the strong relationship between the volumetric efficiency of the scroll machine and the magnitude of the flank gap.

[1]  Yu-Choung Chang,et al.  Family design of scroll compressors with optimization , 2006 .

[2]  Giansalvo Cirrincione,et al.  Novel Geometrical Model of Scroll Compressors for the Analytical Description of the Chamber Volumes , 2006 .

[3]  Richard N. Christensen,et al.  EXPERIMENTAL TESTING OF GEROTOR AND SCROLL EXPANDERS USED IN, AND ENERGETIC AND EXERGETIC MODELING OF, AN ORGANIC RANKINE CYCLE , 2009 .

[4]  Yu-Choung Chang,et al.  Optimum design of scroll profiles created from involute of circle with variable radii by using finite element analysis , 2012 .

[5]  M. M. Cui.  Numerical Study of Unsteady Flows in a Scroll Compressor , 2006 .

[6]  Hailei Wang,et al.  Experimental performance of a compliant scroll expander for an organic Rankine cycle , 2009 .

[7]  Vincent Lemort,et al.  Experimental characterization of a hermetic scroll expander for use in a micro-scale Rankine cycle , 2012 .

[8]  Lei Shi,et al.  A review of scroll expanders for organic Rankine cycle systems , 2015 .

[9]  A. Vernet,et al.  Numerical simulation of turbulent flow in the suction chamber of a gearpump using deforming mesh and mesh replacement , 2010 .

[10]  Li Zhao,et al.  A review of working fluid and expander selections for organic Rankine cycle , 2013 .

[11]  E. Codina,et al.  Numerical Analysis of External Gear Pumps Including Cavitation , 2012 .

[12]  Stefano Clemente,et al.  Experimental tests and modelization of a domestic-scale ORC (Organic Rankine Cycle) , 2013 .

[13]  Tzu-Chen Hung,et al.  Experimental study and CFD approach for scroll type expander used in low-temperature organic Rankine cycle , 2014 .

[14]  Manuel Arlindo Amador de Matos,et al.  Gas mass-flow meters: Measurement and uncertainties , 2013 .

[15]  Michele Pinelli,et al.  Comparison of a Single-Screw and a Scroll Expander under Part-Load Conditions for Low-Grade Heat Recovery ORC Systems , 2014 .

[16]  Vincent Lemort,et al.  Testing and modeling a scroll expander integrated into an Organic Rankine Cycle , 2009 .

[17]  Kevin J. Harada.  Development of a small scale scroll expander , 2010 .

[18]  Daryl Ray Prigmore,et al.  Cooling with the sun's heat Design considerations and test data for a Rankine Cycle prototype , 1975 .

[19]  Yu-Choung Chang,et al.  Study on involute of circle with variable radii in a scroll compressor , 2010 .

[20]  Bülent Kaya,et al.  Erratum to "Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies" , 2009, Adv. Eng. Softw..

[21]  J.-P. Stemplinger,et al.  Hydraulic losses of a gearbox: CFD analysis and experiments , 2013 .

[22]  Noboru Yamada,et al.  Experiment on pumpless Rankine-type cycle with scroll expander , 2013 .

[23]  R. Peterson,et al.  Performance of a small-scale regenerative Rankine power cycle employing a scroll expander , 2008 .

[24]  Vincent Lemort,et al.  Experimental study on an open-drive scroll expander integrated into an ORC (Organic Rankine Cycle) system with R245fa as working fluid , 2013 .