Preparation characteristics of oil-in-water emulsions using differently charged surfactants in straight-through microchannel emulsification

Abstract Straight-through microchannel (MC) emulsification is a novel technique for producing monodisperse emulsions using a silicon array of micromachined through-holes, named a straight-through MC. This paper investigates the effect of surfactants on the straight-through MC emulsification behavior. The oblong straight-through MC used in this study had channel lengths of 48.7 and 9.6 μm. Using anionic and nonionic surfactants, monodisperse soybean oil-in-water (O/W) emulsions with average droplet diameters of 39 μm and coefficients of variation below 3% were successfully prepared. In contrast, the systems containing cationic surfactants resulted in the preparation of polydisperse O/W emulsions and complete wetting of the dispersed phase on the plate surface. An analysis of the above straight-through MC emulsification behavior revealed that a repulsive surfactant–plate surface interaction and a high contact angle value are required to achieve successful straight-through MC emulsification. Analysis also revealed that it is important to keep the negatively charged plate surface hydrophilic during the emulsification process. The dispersed-phase flux affected the straight-through MC emulsification behavior. A size-stable zone, a size-expanding zone, and a continuous outflow zone were observed with an increase in the dispersed-phase flux when using anionic and nonionic surfactants.

[1]  M. Nakajima,et al.  Production and Characterization of Monodispersed Oil-in-Water Microspheres Using Microchannels , 1999 .

[2]  M. Shimizu,et al.  Particle control of emulsion by membrane emulsification and its applications. , 2000, Advanced drug delivery reviews.

[3]  H. Ohki,et al.  Optically accessible microchannels formed in a single-crystal silicon substrate for studies of blood rheology. , 1992, Microvascular research.

[4]  A. Shono,et al.  Microscopic observation of emulsion droplet formation from a polycarbonate membrane , 2002 .

[5]  H. Schubert,et al.  Production of emulsions using microporous, ceramic membranes , 1999 .

[6]  G. Trägårdh,et al.  Membrane emulsification — a literature review , 2000 .

[7]  A. Shono,et al.  Visualization and characterization of SPG membrane emulsification , 2002 .

[8]  S. Sugiura,et al.  Preparation of monodispersed emulsion with large droplets using microchannel emulsification , 2002 .

[9]  Yuji Kikuchi,et al.  Production of Monodispersed Oil-in-Water Emulsion Using Crossflow-Type Silicon Microchannel Plate , 1999 .

[10]  M. Shimizu,et al.  Membrane Emulsification by Microporous Glass , 1992 .

[11]  R. V. D. Sman,et al.  Analysis of droplet formation and interactions during cross-flow membrane emulsification , 2002 .

[12]  M. Nakajima,et al.  Surfactant effect on production of monodispersed microspheres by microchannel emulsification method , 2000 .

[13]  Helmar Schubert,et al.  Effect of Dynamic Interfacial Tension on the Emulsification Process Using Microporous, Ceramic Membranes☆ , 1998 .

[14]  Minoru Seki,et al.  Interfacial Tension Driven Monodispersed Droplet Formation from Microfabricated Channel Array , 2001 .

[15]  Richard A. Williams,et al.  Controlled Production of Emulsions Using a Crossflow Membrane: Part I: Droplet Formation from a Single Pore , 1998 .

[16]  Mitsutoshi Nakajima,et al.  Effect of emulsifiers on the preparation of food-grade oil-in-water emulsions using a straight-through extrusion filter , 2002 .

[17]  Yuji Kikuchi,et al.  Regular-sized cell creation in microchannel emulsification by visual microprocessing method , 1997 .

[18]  Goran T. Vladisavljevic,et al.  Preparation and analysis of oil-in-water emulsions with a narrow droplet size distribution using Shirasu-porous-glass (SPG) membranes☆ , 2002 .

[19]  M. Nakajima,et al.  Preparation of micron-scale monodisperse oil-in-water microspheres by microchannel emulsification , 2001 .

[20]  孝博 川勝,et al.  マイクロチャネルによるO/W乳化法における界面活性剤濃度と液滴生成圧力の関係, およびこれらが液滴径におよぼす影響 , 1998 .

[21]  Minoru Seki,et al.  Characterization of Spontaneous Transformation-Based Droplet Formation during Microchannel Emulsification , 2002 .

[22]  H. Fujita,et al.  Silicon array of elongated through-holes for monodisperse emulsion droplets , 2002 .

[23]  Krassimir D. Danov,et al.  Capillary mechanisms in membrane emulsification: oil-in-water emulsions stabilized by Tween 20 and milk proteins , 2002 .

[24]  Yuji Kikuchi,et al.  Production of Oil-in-Water Microspheres Using a Stainless Steel Microchannel. , 2001, Journal of colloid and interface science.

[25]  David Julian McClements,et al.  Food Emulsions: Principles, Practice, and Techniques , 1998 .

[26]  Sugiura,et al.  Preparation of Monodispersed Solid Lipid Microspheres Using a Microchannel Emulsification Technique. , 2000, Journal of colloid and interface science.

[27]  Richard A. Williams,et al.  Controlled Production of Emulsions Using a Crossflow Membrane: Part II: Industrial Scale Manufacture , 1998 .

[28]  G. Trägårdh,et al.  Food emulsions using membrane emulsification: conditions for producing small droplets , 1999 .

[29]  H. Schubert,et al.  Developments in the continuous mechanical production of oil-in-water macro-emulsions , 1995 .

[30]  Yongan Gu,et al.  The ζ-Potential of Glass Surface in Contact with Aqueous Solutions , 2000 .