An indoor thermal environment design system for renovation using augmented reality

Abstract The renovation projects of buildings and living spaces, which aim to improve the thermal environment, are gaining importance because of energy saving effects and occupants' health considerations. However, the indoor thermal design is not usually performed in a very efficient manner by stakeholders, due to the limitations of a sequential waterfall design process model, and due to the difficulty in comprehending the CFD simulation results for stakeholders. On the other hand, indoor greenery has been introduced to buildings as a method for adjusting the thermal condition. Creating a VR environment, which can realistically and intuitively visualize a thermal simulation model is very time consuming and the resulting VR environment created by 3D computer graphics objects is disconnected from the reality and does not allow design stakeholders to experience the feelings of the real world. Therefore, the objective of this research is to develop a new AR-based methodology for intuitively visualizing indoor thermal environment for building renovation projects. In our proposed system, easy-to-comprehend visualization of CFD results augment the real scenes to provide users with information about thermal effects of their renovation design alternatives interactively. Case studies to assess the effect of indoor greenery alternatives on the thermal environment are performed. In conclusion, integrating CFD and AR provides users with a more natural feeling of the future thermal environment. The proposed method was evaluated feasible and effective.

[1]  Elena Piera Montacchini,et al.  Greenery for a university campus: does it affect indoor environmental quality and user well-being? , 2017 .

[2]  J. Barton,et al.  Influences of Green Outdoors versus Indoors Environmental Settings on Psychological and Social Outcomes of Controlled Exercise , 2016, International journal of environmental research and public health.

[3]  Karsten Voss.  Solar energy in building renovation — results and experience of international demonstration buildings , 2000 .

[4]  Doosam Song,et al.  Prediction and evaluation method of wind environment in the early design stage using BIM-based CFD simulation , 2010 .

[5]  M. Srivanit,et al.  Evaluating the cooling effects of greening for improving the outdoor thermal environment at an institutional campus in the summer , 2013 .

[6]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[7]  Y Zhu,et al.  Dynamic thermal environment and thermal comfort. , 2016, Indoor air.

[8]  Ali M. Malkawi,et al.  A new paradigm for Human-Building Interaction: the use of CFD and Augmented Reality , 2005 .

[9]  周三 村上,et al.  樹木モデルを組み込んだ対流・放射・湿気輸送連成解析による樹木の屋外温熱環境緩和効果の検討 , 2000 .

[10]  P V Nielsen,et al.  Computational fluid dynamics and room air movement. , 2004, Indoor air.

[11]  Burcin Becerik-Gerber,et al.  Transitioning to Integrated Project Delivery: Potential barriers and lessons learned , 2011 .

[12]  Verina Cristie,et al.  CFD Post-processing in Unity3D , 2015, ICCS.

[13]  Iva Kovacic,et al.  Strategies of building stock renovation for ageing society , 2015 .

[14]  Matti Gröhn,et al.  Utilizing virtual environments in construction projects , 2003, J. Inf. Technol. Constr..

[15]  Charles M. Eastman,et al.  BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors , 2008 .

[16]  P. Fanger,et al.  Extension of the PMV model to non-air-conditioned buildings in warm climates , 2002 .

[17]  Tian Zhang,et al.  Improvement of registration accuracy of a handheld augmented reality system for urban landscape simulation , 2014 .

[18]  Wei Tian,et al.  Coupling indoor airflow, HVAC, control and building envelope heat transfer in the Modelica Buildings library , 2016 .

[19]  N. Wong,et al.  Growth light provision for indoor greenery: A case study , 2017 .

[20]  Giuseppe Monno,et al.  Distributed design review using tangible augmented technical drawings , 2010, Comput. Aided Des..

[21]  Olatz Pombo,et al.  The challenge of sustainable building renovation: assessment of current criteria and future outlook , 2015 .

[22]  G. Klein,et al.  Parallel Tracking and Mapping for Small AR Workspaces , 2007, 2007 6th IEEE and ACM International Symposium on Mixed and Augmented Reality.

[23]  Rasmus Lund Jensen,et al.  Early stage decision support for sustainable building renovation – A review , 2016 .

[24]  Tarja Häkkinen,et al.  Feasibility studies of energy retrofits: Case studies of nearly zero-energy building renovation , 2016 .

[25]  Christophe Nicolle,et al.  Integration of thermal building simulation and VR techniques for sustainable building projects , 2013 .

[26]  Guohui Gan,et al.  Evaluation of room air distribution systems using computational fluid dynamics , 1995 .

[27]  Peng Gao,et al.  A hybrid decision support system for sustainable office building renovation and energy performance improvement , 2010 .

[28]  Anders Ynnerman,et al.  Visualization of sensor data using mobile phone augmented reality , 2006, 2006 IEEE/ACM International Symposium on Mixed and Augmented Reality.

[29]  Diego L. Valera,et al.  Effects of a vertical greenery system on selected thermal and sound mitigation parameters for indoor building walls , 2012 .

[30]  Ove Mørck,et al.  Energy consumption and indoor climate in a residential building before and after comprehensive energy retrofitting , 2016 .

[31]  Gudrun Klinker,et al.  Tangible Mixed Reality On-Site: Interactive Augmented Visualisations from Architectural Working Models in Urban Design , 2015 .

[32]  EFFECTS OF FOLIAGE PLANTS ON THERMAL ENVIRONMENT AND COMFORT INSIDE ROOM : Experimental analysis in winter , 1994 .

[33]  Maki Sugimoto,et al.  AR display system of temperature by camera tracking based on 3D environmental model , 2015 .

[34]  Jayashree Karlekar,et al.  Outdoor mobile augmented reality for past and future on-site architectural visualizations , 2009 .

[35]  G. Jendritzky,et al.  Effects of the thermal environment on human health: an investigation of 30 years of daily mortality data from SW Germany , 2002 .

[36]  Tomohiro Fukuda,et al.  An invisible height evaluation system for building height regulation to preserve good landscapes using augmented reality , 2011 .

[37]  Dieter Schmalstieg,et al.  Global pose estimation using multi-sensor fusion for outdoor Augmented Reality , 2009, 2009 8th IEEE International Symposium on Mixed and Augmented Reality.

[38]  Roberto Lamberts,et al.  A review of human thermal comfort in the built environment , 2015 .