PathfinderTURB: an automatic boundary layer algorithm. Development, validation and application to study the impact on in situ measurements at the Jungfraujoch

Abstract. We present the development of the PathfinderTURB algorithm for the analysis of ceilometer backscatter data and the real-time detection of the vertical structure of the planetary boundary layer. Two aerosol layer heights are retrieved by PathfinderTURB: the convective boundary layer (CBL) and the continuous aerosol layer (CAL). PathfinderTURB combines the strengths of gradient- and variance-based methods and addresses the layer attribution problem by adopting a geodesic approach. The algorithm has been applied to 1 year of data measured by two ceilometers of type CHM15k, one operated at the Aerological Observatory of Payerne (491 m a.s.l.) on the Swiss plateau and one at the Kleine Scheidegg (2061 m a.s.l.) in the Swiss Alps. The retrieval of the CBL has been validated at Payerne using two reference methods: (1) manual detections of the CBL height performed by human experts using the ceilometer backscatter data; (2) values of CBL heights calculated using the Richardson's method from co-located radio sounding data. We found average biases as small as 27 m (53 m) with respect to reference method 1 (method 2). Based on the excellent agreement between the two reference methods, PathfinderTURB has been applied to the ceilometer data at the mountainous site of the Kleine Scheidegg for the period September 2014 to November 2015. At this site, the CHM15k is operated in a tilted configuration at 71° zenith angle to probe the atmosphere next to the Sphinx Observatory (3580 m a.s.l.) on the Jungfraujoch (JFJ). The analysis of the retrieved layers led to the following results: the CAL reaches the JFJ 41 % of the time in summer and 21 % of the time in winter for a total of 97 days during the two seasons. The season-averaged daily cycles show that the CBL height reaches the JFJ only during short periods (4 % of the time), but on 20 individual days in summer and never during winter. During summer in particular, the CBL and the CAL modify the air sampled in situ at JFJ, resulting in an unequivocal dependence of the measured absorption coefficient on the height of both layers. This highlights the relevance of retrieving the height of CAL and CBL automatically at the JFJ.

[1]  D. Donovan,et al.  Pathfinder: applying graph theory to consistent tracking of daytime mixed layer height with backscatter lidar , 2016 .

[2]  Alexander Haefele,et al.  An empirical method to correct for temperature-dependent variations in theoverlap function of CHM15k ceilometers , 2016 .

[3]  T. Petäjä,et al.  New particle formation in the free troposphere: A question of chemistry and timing , 2016, Science.

[4]  P. Zieger,et al.  A Review of More than 20 Years of Aerosol Observation at the High Altitude Research Station Jungfraujoch, Switzerland (3580 m asl) , 2016 .

[5]  M. Steinbacher,et al.  Analysis of long‐term aerosol size distribution data from Jungfraujoch with emphasis on free tropospheric conditions, cloud influence, and air mass transport , 2015 .

[6]  Andreas Kazantzidis,et al.  Accuracy of ground surface broadband shortwave radiation monitoring , 2014 .

[7]  Bertrand Calpini,et al.  Determination and climatology of the planetary boundary layer height above the Swiss plateau by in situ and remote sensing measurements as well as by the COSMO-2 model , 2014 .

[8]  W. Thomas,et al.  What is the benefit of ceilometers for aerosol remote sensing? An answer from EARLINET , 2014 .

[9]  C. Córdoba-Jabonero,et al.  Cluster Analysis: A New Approach Applied to Lidar Measurements for Atmospheric Boundary Layer Height Estimation , 2014 .

[10]  P. Zieger,et al.  Investigation of the Planetary Boundary Layer in the Swiss Alps Using Remote Sensing and In Situ Measurements , 2014, Boundary-Layer Meteorology.

[11]  William Whewell.  Of Methods of Observation , 2014 .

[12]  G. Biavati.  On the Retrieval of Mixing Height from Ceilometers , 2013 .

[13]  R. Philipona,et al.  Solar and Thermal Radiation Errors on Upper-Air Radiosonde Temperature Measurements , 2013 .

[14]  Martial Haeffelin,et al.  Exploring a geophysical process‐based attribution technique for the determination of the atmospheric boundary layer depth using aerosol lidar and near‐surface meteorological measurements , 2013 .

[15]  Matthias Wiegner,et al.  Aerosol profiling with the Jenoptik ceilometer CHM15kx , 2012 .

[16]  Thomas Ruhtz,et al.  Spatial variation of aerosol optical properties around the high-alpine site Jungfraujoch (3580 m a.s.l.) , 2012 .

[17]  Angelo Riccio,et al.  Automatic detection of atmospheric boundary layer height using ceilometer backscatter data assisted by a boundary layer model , 2012 .

[18]  M. Pierotti.  The assessment of the parameters , 2012 .

[19]  L. Sauvage,et al.  Evaluation of Mixing-Height Retrievals from Automatic Profiling Lidars and Ceilometers in View of Future Integrated Networks in Europe , 2012, Boundary-Layer Meteorology.

[20]  M. Steinbacher,et al.  Aerosol climatology and planetary boundary influence at the Jungfraujoch analyzed by synoptic weather types , 2011 .

[21]  Albert Ansmann,et al.  Ceilometer lidar comparison: backscatter coefficient retrieval and signal-to-noise ratio determination , 2010 .

[22]  W. Steinbrecht,et al.  The Eyjafjallajökull eruption in April 2010 – detection of volcanic plume using in-situ measurements, ozone sondes and lidar-ceilometer profiles , 2010 .

[23]  Francesc Rocadenbosch,et al.  Atmospheric boundary-layer height estimation by adaptive Kalman filtering of lidar data , 2010, Remote Sensing.

[24]  W. Steinbrecht,et al.  The Eyjafjallajökull eruption in April 2010 - detection of volcanic plume using in-situ measurements, ozone sondes and a new generation ceilometer network , 2010 .

[25]  Valentin Mitev,et al.  Frequency of Boundary-Layer-Top Fluctuations in Convective and Stable Conditions Using Laser Remote Sensing , 2010 .

[26]  Giovanni Martucci,et al.  Detection of Cloud-Base Height Using Jenoptik CHM15K and Vaisala CL31 Ceilometers , 2010 .

[27]  H. Wille,et al.  Detection of aerosol layers with ceilometers , 2010 .

[28]  G. Gobbi,et al.  Study of atmospheric aerosols and mixing layer by LIDAR. , 2009, Radiation protection dosimetry.

[29]  Dominik Brunner,et al.  Supplement to : Assessment of Parameters Describing Representativeness of Air Quality in-situ Measurement Sites , 2009 .

[30]  Albert Ansmann,et al.  Continuous monitoring of the boundary-layer top with lidar , 2008 .

[31]  S. Reimann,et al.  Estimation of background concentrations of trace gases at the Swiss Alpine site Jungfraujoch (3580 m asl) , 2008 .

[32]  INTERCOMPARISON OF METHODS FOR DETERMINATION OF MIXING HEIGHTS USING A NEW NETWORK OF SINGLE-PHOTON-COUNTING HIGH-SENSITIVITY CEILOMETERS IN GERMANY , 2008 .

[33]  Valentin Mitev,et al.  Comparison between Backscatter Lidar and Radiosonde Measurements of the Diurnal and Nocturnal Stratification in the Lower Troposphere , 2007 .

[34]  Ari Karppinen,et al.  Retrieval of mixing height and dust concentration with lidar ceilometer , 2007 .

[35]  Jacques Pelon,et al.  STRAT: An Automated Algorithm to Retrieve the Vertical Structure of the Atmosphere from Single-Channel Lidar Data , 2007 .

[36]  Jens Bösenberg,et al.  Determination of the convective boundary-layer height with laser remote sensing , 2006 .

[37]  A. Stohl,et al.  Quantification of topographic venting of boundary layer air to the free troposphere , 2003 .

[38]  U. Baltensperger,et al.  Partitioning of reactive nitrogen (NO y ) and dependence on meteorological conditions in the lower free troposphere , 2002 .

[39]  De Wekker,et al.  Structure and morphology of the convective boundary layer in mountainous terrain , 2002 .

[40]  Donald H. Lenschow,et al.  An Objective Method for Deriving Atmospheric Structure from Airborne Lidar Observations , 2000 .

[41]  Volker Wulfmeyer,et al.  Measuring Second- through Fourth-Order Moments in Noisy Data , 2000 .

[42]  Stephen A. Cohn,et al.  Boundary Layer Height and Entrainment Zone Thickness Measured by Lidars and Wind-Profiling Radars , 2000 .

[43]  Raymond M. Hoff,et al.  The Detection of Mixed Layer Depth and Entrainment Zone Thickness from Lidar Backscatter Profiles , 1999 .

[44]  C. Flamant,et al.  Urban boundary-layer height determination from lidar measurements over the paris area. , 1999, Applied optics.

[45]  H. Wanner,et al.  Aerosol transport to the high Alpine sites Jungfraujoch (3454 m asl) and Colle Gnifetti (4452 m asl) , 1998 .

[46]  Edwin W. Eloranta,et al.  Convective boundary layer mean depths and cloud geometrical properties obtained from volume imaging lidar data , 1995 .

[47]  A. Bucholtz,et al.  Rayleigh-scattering calculations for the terrestrial atmosphere. , 1995, Applied optics.

[48]  Jitendra Malik,et al.  Scale-Space and Edge Detection Using Anisotropic Diffusion , 1990, IEEE Trans. Pattern Anal. Mach. Intell..

[49]  R. Stull.  An Introduction to Boundary Layer Meteorology , 1988 .

[50]  William P. Hooper,et al.  Lidar Measurements of Wind in the Planetary Boundary Layer: The Method, Accuracy and Results from Joint Measurements with Radiosonde and Kytoon. , 1986 .

[51]  John F. Canny,et al.  A Computational Approach to Edge Detection , 1986, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[52]  George C. Holzworth,et al.  ESTIMATES OF MEAN MAXIMUM MIXING DEPTHS IN THE CONTIGUOUS UNITED STATES , 1964 .

[53]  Edsger W. Dijkstra,et al.  A note on two problems in connexion with graphs , 1959, Numerische Mathematik.

[54]  Lewis F. Richardson,et al.  The Supply of Energy from and to Atmospheric Eddies , 1920 .

[55]  A. Apituley,et al.  Determination of the mixing layer height by a ceilometer , 2022 .