Rotating instabilities (RIs) have been observed in axial flow fans and centrifugal compressors as well as in low-speed and high-speed axial compressors. They are responsible for the excitation of high amplitude rotor blade vibrations and noise generation. This flow phenomenon moves relative to the rotor blades and causes periodic vortex separations at the blade tips and an axial reversed flow through the tip clearance of the rotor blades. The paper describes experimental investigations of Rls in the Dresden Low-Speed Research Compressor (LSRC). The objective is to show that the fluctuation of the blade tip vortex is responsible for the origination of this flow phenomenon. RIs have been found at operating points near the stability limit of the compressor with relatively large tip clearance of the rotor blades. The application of time-resolving sensors in both fixed and rotating frame of reference enables a detailed description of the circumferential structure and the spatial development of this unsteady flow phenomenon, which is limited to the blade tip region. Laser-Doppler-anemometry (LDA) within the rotor blade passages and within the tip clearance as well as unsteady pressure measurements on the rotor blades show the structure of the blade tip vortex. It will be shown that the periodical interaction of the blade tip vortex of one blade with the flow at the adjacent blade is responsible for the generation of a rotating structure with high mode orders, termed a rotating instability.
[1]
Huu Duc Vo,et al.
Role of Blade Passage Flow Structures in Axial Compressor Rotating Stall Inception
,
1998
.
[2]
Ivor Day,et al.
1997 Best Paper Award—Turbomachinery Committee: A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor
,
1998
.
[3]
Motoo Kuroumaru,et al.
Structure of Tip Clearance Flow in an Isolated Axial Compressor Rotor
,
1989
.
[4]
Luc Mongeau.
Experimental study of the mechanism of sound generation by a rotating stall in centrifugal turbomachines
,
1992
.
[5]
Ivor Day,et al.
A study of spike and modal stall phenomena in a low-speed axial compressor
,
1997
.
[6]
K. Mathioudakis,et al.
Development of Small Rotating Stall in a Single Stage Axial Compressor
,
1985
.
[7]
Masato Furukawa,et al.
Propagation of multiple short length-scale stall cells in an axial compressor rotor
,
1999
.
[8]
W. Neise,et al.
Experimental Study of Tip Clearance Losses and Noise in Axial Turbomachines
,
1997
.