Research on anisotropy of the 7B50 super thick plate

[1]  Jue Lu,et al.  Novel strategy of electroshock treatment for improving mechanical performances of Al–Zn–Mg–Cu alloy by edge dislocation increment , 2022, Materials Science and Engineering: A.

[2]  C. Wu,et al.  Microstructure and Mechanical Properties of Dissimilar Double-Side Friction Stir Welds Between Medium-Thick 6061-T6 Aluminum and Pure Copper Plates , 2022, Acta Metallurgica Sinica (English Letters).

[3]  Xinquan Zhang,et al.  Effect of Solution Treatment on Recrystallization, Texture and Mechanical Properties of 7A65-T74 Aluminum Alloy Super-thick Hot Rolled Plate , 2022, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[4]  L. Zhuang,et al.  Enhanced stiffness of Al–Zn–Mg–Cu alloys via heterogeneous structure of soft and hard microdomains , 2022, Materials Science and Engineering: A.

[5]  Xiuling Wang,et al.  Strength behavior of circular concrete-filled steel tube stub columns under axial compression: A review , 2022, Construction and Building Materials.

[6]  D. Leonard,et al.  Microstructural evolution and strengthening mechanisms in a heat-treated additively manufactured Al–Cu–Mn–Zr alloy , 2022, Materials Science and Engineering: A.

[7]  L. Zhan,et al.  Creep aging behavior and performance of Al-Zn-Mg-Cu alloys under different parameters in retrogression aging treatment , 2022, Journal of Central South University.

[8]  H. Xue,et al.  Effects of shot peening with different coverage on surface integrity and fatigue crack growth properties of 7B50-T7751 aluminum alloy , 2022, Engineering Failure Analysis.

[9]  Zhenjun Zhang,et al.  A general physics-based hardening law for single phase metals , 2022, Acta Materialia.

[10]  Zhenjun Zhang,et al.  Relationship between strength and uniform elongation of metals based on an exponential hardening law , 2022, Acta Materialia.

[11]  Xinquan Zhang,et al.  Effect of the Initial Texture, Recrystallization and Re-Dissolution Process on the Evolution of Texture during Solution Treatment of the 7A65 Hot Rolled Plate , 2021, Metals.

[12]  Zhu-bin He,et al.  Deformation and strengthening behaviors of Al-Cu-Mg alloy thick plate during hot forming-quenching integrated process , 2021, Journal of Materials Research and Technology.

[13]  Weifeng Xu,et al.  Effect of thermal exposure on microstructure and mechanical properties of friction stir welding 7B50-T7451 aluminium alloy thick plate joint , 2021, Journal of Materials Research and Technology.

[14]  Guoqun Zhao,et al.  An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet , 2021, Journal of Materials Engineering and Performance.

[15]  W. He,et al.  Influence of microstructural and crystallographic inhomogeneity on tensile anisotropy in thick-section Al–Li–Cu–Mg plates , 2021, Materials Science and Engineering: A.

[16]  Zhe-Feng Zhang,et al.  Examining the Effect of the Aging State on Strength and Plasticity of Wrought Aluminum Alloys , 2021, SSRN Electronic Journal.

[17]  D. Bae,et al.  Improvement in the anisotropic mechanical properties and formability of Al–Si–Mg–Cu-based alloy sheets , 2021 .

[18]  Guoqun Zhao,et al.  Effects of heat treatment on the microstructure, texture and mechanical property anisotropy of extruded 2196 Al-Cu-Li alloy , 2020, Journal of Alloys and Compounds.

[19]  Zhiyi Liu,et al.  Effect of various aging treatment on thermal stability of a novel Al-Zn-Mg-Cu alloy for oil drilling , 2020 .

[20]  A. Luo,et al.  Modeling Precipitation Hardening and Yield Strength in Cast Al-Si-Mg-Mn Alloys , 2020, Metals.

[21]  L. Zuo,et al.  Yield strength prediction of rolled Al−(1.44−12.40)Si−0.7Mg alloy sheets under T4 condition , 2020 .

[22]  T. Yuan,et al.  Microstructures and tensile properties of a selective laser melted Al–Zn–Mg–Cu (Al7075) alloy by Si and Zr microalloying , 2020, Materials Science and Engineering: A.

[23]  X. She,et al.  Study on microstructure and fracture characteristics of 5083 aluminum alloy thick plate , 2020 .

[24]  H. Proudhon,et al.  Modeling plasticity of an aluminum 2024T351 thick rolled plate for cold forming applications , 2020, International Journal of Solids and Structures.

[25]  Yan-qing Yang,et al.  The Fracture Behavior of 7085-T74 Al Alloy Ultra-Thick Plate During High Cycle Fatigue , 2020, Metallurgical and Materials Transactions A.

[26]  Daoxin Liu,et al.  Effects of Ultrasonic Surface Rolling on the Localized Corrosion Behavior of 7B50-T7751 Aluminum Alloy , 2020, Materials.

[27]  Q. Pan,et al.  Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation , 2019 .

[28]  Jianguo Lin,et al.  Experimental investigation and modelling of yield strength and work hardening behaviour of artificially aged Al-Cu-Li alloy , 2019, Materials & Design.

[29]  Guoqun Zhao,et al.  Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate , 2019, Materials & Design.

[30]  Daoxin Liu,et al.  Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy , 2019, International Journal of Fatigue.

[31]  Gang Wang,et al.  Effect of quenching rate and its coupling model on precipitation and strength of Al–Cu–Cd alloys , 2019, Materials Science and Engineering: A.

[32]  K. Ray,et al.  Prediction of Aging Kinetics and Yield Strength of 6063 Alloy , 2019, Journal of Materials Engineering and Performance.

[33]  Zhichao Sun,et al.  Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method , 2018, International Journal of Plasticity.

[34]  Kun Liu,et al.  Prediction of properties distribution of 7B50 alloy thick plates after quenching and aging by quench factor analysis method , 2018, Rare Metals.

[35]  Zhiyi Liu,et al.  Anisotropy in fatigue crack propagation behavior of Al-Cu-Li alloy thick plate , 2017 .

[36]  M. Kumar,et al.  Quantitative prediction of the mechanical properties of precipitation-hardened alloys with special application to Al–Mg–Si , 2017 .

[37]  Baicheng Liu,et al.  Modeling the precipitation kinetics and tensile properties in Al-7Si-Mg cast aluminum alloys , 2017 .

[38]  Viggo Tvergaard,et al.  Ductile failure modeling , 2016, International Journal of Fracture.

[39]  R. Mitra,et al.  Effect of Mushy State Rolling on the Microstructure, Microhardness, and Microtexture in Al-4.5wt.%Cu-5wt.%TiB2 In Situ Composite , 2016 .

[40]  Ruiming Su,et al.  Study on a new retrogression and re-aging treatment of spray formed Al-Zn-Mg-Cu alloy , 2016 .

[41]  Huijun Li,et al.  Effect of minor Sc and Zr on recrystallization behavior and mechanical properties of novel Al–Zn–Mg–Cu alloys , 2016 .

[42]  K. Ray,et al.  Process model to predict yield strength of AA6063 alloy , 2015 .

[43]  P. Rometsch,et al.  Heat treatment of 7xxx series aluminium alloys—Some recent developments , 2014 .

[44]  Xin-Mingm Zhang,et al.  Anisotropy of localized corrosion in 7050–T7451 Al alloy thick plate , 2013 .

[45]  M. Song.  Modeling the hardness and yield strength evolutions of aluminum alloy with rod/needle-shaped precipitates , 2007 .

[46]  Jacques Besson,et al.  Anisotropic ductile fracture: Part I: experiments , 2004 .

[47]  X. Shao,et al.  Effect of Aging State on Fatigue Property of Wrought Aluminum Alloys , 2021, SSRN Electronic Journal.

[48]  L. Zhuang,et al.  Synergy in hybrid multi-scale particles for the improved formability of Al–Zn–Mg–Cu alloys , 2021 .