Predicting of mechanical properties of PP/LLDPE/TiO2 nano-composites by response surface methodology

Abstract The object of this work is to study the mechanical properties of ternary nano-composites based on polypropylene/linear low density polyethylene/nano-titanium dioxide (PP/LLDPE/TiO2) using the response surface methodology (RSM). Experiments were designed according to a Box–Behnken method, to quantify the effects of linear low density polyethylene (LLDPE), styrene–ethylene–butylene–styrene (SEBS as a compatibilizer), and titanium dioxide (TiO2) nano-particles. Three levels were chosen for the considered parameters as follows: LLDPE (20–60 wt%), TiO2 (0–4 wt%), and SEBS (0–6 wt%). In addition, RSM models were used to develop the desirability function. Finally, the morphology and thermal properties of the samples were evaluated by scanning electron microscopy (SEM) and differential scanning calorimeter (DSC). It was found that the LLDPE content had the main role in mechanical properties and morphology of the nano-composite. The optimal values of the nano-particle were predicted to be 24.85 wt% for LLDPE, 3.02 wt% for TiO2, and 6 wt% for SEBS. The obtained R2 values and normal probability plots indicated a good agreement between the experimental results and those predicted by the model (above 0.95 for all the responses).

[1]  B. Boukamp,et al.  Polypropylene/SiO2 nanocomposites with improved mechanical properties , 2004 .

[2]  D. Bikiaris.  Microstructure and Properties of Polypropylene/Carbon Nanotube Nanocomposites , 2010, Materials.

[3]  Q. Xue,et al.  Effect of Nanoscale SiO2 and TiO2 as the Fillers on the Mechanical Properties and Aging Behavior of Linear Low-Density Polyethylene/Low-Density Polyethylene Blends , 2005 .

[4]  Q. Fu,et al.  Shear‐Induced Morphological Change in PP/LLDPE Blend , 2002 .

[5]  K. Premphet,et al.  Phase structure of ternary polypropylene/elastomer/filler composites: effect of elastomer polarity , 2000 .

[6]  P. Praserthdam,et al.  LLDPE/nano-silica composites synthesized via in situ polymerization of ethylene/1-hexene with MAO/metallocene catalyst , 2005 .

[7]  J. Leng,et al.  Significantly improving infrared light-induced shape recovery behavior of shape memory polymeric nanocomposite via a synergistic effect of carbon nanotube and boron nitride , 2014 .

[8]  Weijian Xu,et al.  Preparation and properties of nylon 6/carboxylic silica nanocomposites via in situ polymerization , 2011 .

[9]  Yongtao Yao,et al.  Self-assembled multi-layered carbon nanofiber nanopaper for significantly improving electrical actuation of shape memory polymer nanocomposite , 2014 .

[10]  D. Pai,et al.  Synthesis and characterization of Ag–TiO2–CNT nanoparticle composites with high photocatalytic activity under artificial light , 2014 .

[11]  Guang-hong Zhou,et al.  Preparation, characterization and thermoelectricity of ATT/TiO2/PANI nano-composites doped with different acids , 2013 .

[12]  S. Thongyai,et al.  EFFECT OF MIXING CONDITIONS AND PARTICLE SIZES OF TITANIUM DIOXIDE ON MECHANICAL AND MORPHOLOGICAL PROPERTIES OF POLYPROPYLENE/TITANIUM DIOXIDE COMPOSITES , 2009 .

[13]  A. S. Luyt,et al.  Comparative study of the morphology and properties of PP/LLDPE/wood powder and MAPP/LLDPE/wood powder polymer blend composites , 2010 .

[14]  A. Amash,et al.  Morphology and properties of isotropic and oriented samples of cellulose fibre–polypropylene composites , 2000 .

[15]  Jean-Hong Chen,et al.  Morphology and thermal properties in the binary blends of poly(propylene-co-ethylene) copolymer and isotactic polypropylene with polyethylene , 2007 .

[16]  Amin Hamed Mashhadzadeh,et al.  Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite , 2015 .

[17]  G. Rusu,et al.  Nylon 6/TiO2 Composites by in situ Anionic Ring-Opening Polymerization of ϵ-Caprolactam: Synthesis, Characterization, and Properties , 2011 .

[18]  A. Penlidis,et al.  Mechanical properties of ethylene/1-hexene copolymers with tailored short chain branching distributions , 2002 .

[19]  Constantine D. Papaspyrides,et al.  A review on polymer–layered silicate nanocomposites , 2008 .

[20]  D. L. Tran,et al.  Effect of titanium dioxide on the properties of polyethylene/TiO2 nanocomposites , 2013 .

[21]  Yuliang Yang,et al.  In situ polymerization and characterization of polyamide-6/silica nanocomposites derived from water glass , 2004 .

[22]  Joseph Kuruvilla,et al.  Mechanical properties of titanium dioxide-filled polystyrene microcomposites , 2004 .

[23]  A. Díez-Pascual,et al.  Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites , 2013 .

[24]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .

[25]  Yongtao Yao,et al.  Noncovalently functionalized carbon fiber by grafted self-assembled graphene oxide and the synergistic effect on polymeric shape memory nanocomposites , 2014 .

[26]  I. Lieberwirth,et al.  Study of the photodegradation of nanocomposites containing TiO2 nanoparticles dispersed in polyethylene and in poly(ethylene-co-octadecene) , 2014 .

[27]  P. Supaphol,et al.  Non-isothermal melt-crystallization and mechanical properties of titanium(IV) oxide nanoparticle-filled isotactic polypropylene , 2007 .

[28]  I. Lieberwirth,et al.  Polyethylene and poly(ethylene-co-1-octadecene) composites with TiO2 based nanoparticles by metallocenic “in situ” polymerization , 2013 .

[29]  R. Quijada,et al.  Thermal oxidation of metallocene ethylene-1-olefin copolymer films during one year oven aging , 2008 .

[30]  Kwang-Jae Kim,et al.  Simultaneous optimization of mechanical properties of steel by maximizing exponential desirability functions , 2000 .

[31]  J. Jang,et al.  Evaluation of anti-scratch properties of graphene oxide/polypropylene nanocomposites , 2012 .