Detection of damaged supports under railway track based on frequency shift

Abstract In railway transportation systems, the tracks are usually fastened on sleepers which are supported by the ballast. A lot of research has been conducted to guarantee the safety of railway track because of its importance, and more concern is expressed about monitoring of track itself such as railway level and alignment. The ballast and fasteners which provide strong support to the railway track are important as well whereas the detection of loose or missing fasteners and damaged ballast mainly relies on visual inspection. Although it is reliable when the fastener is missing and the damaged ballast is on the surface, it provides less help if the fastener is only loose and the damaged ballast is under the sleepers, which are however frequently observed in practice. This paper proposes an approach based on frequency shift to identify the damaged supports including the loose or missing fasteners and damaged ballast. In this study, the rail-sleeper-ballast system is modeled as an Euler beam evenly supported by a series of springs, the stiffness of which are reduced when the fastener is loose or missing and the ballast under the sleepers is damaged. An auxiliary mass is utilized herein and when it is mounted on the beam, the natural frequencies of the whole system will change with respect to the location of the auxiliary mass. The auxiliary mass induced frequency shift is analyzed and it is found the natural frequencies change periodically when the supports are undamaged, whereas the periodicity will be broken due to damaged supports. In fact, the natural frequencies drop clearly when the auxiliary mass moves over the damaged support. A special damage index only using the information of the damaged states is proposed and both numerical and experimental examples are carried out to validate the proposed method.

[1]  Nikos D. Lagaros,et al.  A trajectory method for vibration based damage identification of underdetermined problems , 2017 .

[2]  Massimo Ruzzene,et al.  MODELLING AND IDENTIFICATION OF THE DYNAMIC RESPONSE OF A SUPPORTED BRIDGE , 2000 .

[3]  Seng Tjhen Lie,et al.  Damage detection using frequency shift path , 2016 .

[4]  A. K. Pandey,et al.  Damage Detection in Structures Using Changes in Flexibility , 1994 .

[5]  Maura Imbimbo,et al.  A multi-stage approach for damage detection in structural systems based on flexibility , 2016 .

[6]  Luigi Garibaldi,et al.  Determination of moving load characteristics by output-only identification over the Pescara beams , 2011 .

[7]  Jun Li,et al.  Parallel Decentralized Damage Detection of a Structure with Subsets of Parameters , 2014 .

[8]  Ranjan Ganguli,et al.  Structural Damage Detection using Spatial Fourier Coefficients of Mode Shapes of Beams Simply Supported at Both Ends , 2011 .

[9]  Yeong-Bin Yang,et al.  EXTRACTING BRIDGE FREQUENCIES FROM THE DYNAMIC RESPONSE OF A PASSING VEHICLE , 2002 .

[10]  Pizhong Qiao,et al.  Vibration-based Damage Identification Methods: A Review and Comparative Study , 2011 .

[11]  Wieslaw Ostachowicz,et al.  Two-dimensional modal curvature estimation via Fourier spectral method for damage detection , 2016 .

[12]  R. Ganguli,et al.  Fourier Analysis of Mode Shapes of Damaged Beams , 2007 .

[13]  Keith Worden,et al.  On robust regression analysis as a means of exploring environmental and operational conditions for SHM data , 2015 .

[14]  Ahmet E. Aktan,et al.  Application of Modal Flexibility and Its Derivatives in Structural Identification , 1998 .

[15]  Colin P. Ratcliffe,et al.  Local damage detection using the two-dimensional gapped smoothing method , 2005 .

[16]  C. Ratcliffe.  DAMAGE DETECTION USING A MODIFIED LAPLACIAN OPERATOR ON MODE SHAPE DATA , 1997 .

[17]  M. Chandrashekhar,et al.  Damage assessment of structures with uncertainty by using mode-shape curvatures and fuzzy logic , 2009 .

[18]  Michael Feldman,et al.  Hilbert transform methods for nonparametric identification of nonlinear time varying vibration systems , 2014 .

[19]  Seng Tjhen Lie,et al.  A frequency shift curve based damage detection method for cylindrical shell structures , 2014 .

[20]  Spilios D. Fassois,et al.  A time series generalized functional model based method for vibration-based damage precise localization in structures consisting of 1D, 2D, and 3D elements , 2016 .

[21]  Maria Pina Limongelli,et al.  Damage localization in bridges via the FRF interpolation method , 2015 .

[22]  Colin P. Ratcliffe,et al.  Local Damage Detection with the Global Fitting Method Using Operating Deflection Shape Data , 2010 .

[23]  E. Peter Carden,et al.  Vibration Based Condition Monitoring: A Review , 2004 .

[24]  Shuncong Zhong,et al.  Response-only method for damage detection of beam-like structures using high accuracy frequencies with auxiliary mass spatial probing , 2008 .

[25]  R. Ghanem,et al.  A WAVELET-BASED APPROACH FOR THE IDENTIFICATION OF LINEAR TIME-VARYING DYNAMICAL SYSTEMS , 2000 .

[26]  Yeong-Bin Yang,et al.  A feasibility study on railway ballast damage detection utilizing measured vibration of in situ concrete sleeper , 2012 .

[27]  Stefano Marchesiello,et al.  Time-dependent identification of a bridge-like structure with crossing loads , 2009 .

[28]  Ranjan Ganguli,et al.  Damage assessment of composite plate structures with material and measurement uncertainty , 2016 .

[29]  S. Law,et al.  Structural Damage Detection from Modal Strain Energy Change , 2000 .

[30]  Seng Tjhen Lie,et al.  Damage Detection in Compressed Natural Gas (CNG) Cylinders Based on Auxiliary Mass Induced Frequency Shift , 2015 .

[31]  Maria Pina Limongelli,et al.  Frequency response function interpolation for damage detection under changing environment , 2010 .

[32]  Colin P. Ratcliffe,et al.  Local Damage Detection with the Global Fitting Method Using Mode Shape Data in Notched Beams , 2009 .

[33]  Z. H. Xiang,et al.  Frequency Shift Curve Based Damage Detection Method for Beam Structures , 2011 .

[34]  Yeong-Bin Yang,et al.  Vehicle–bridge interaction dynamics and potential applications , 2005 .

[35]  Ricardo Perera,et al.  Power mode shapes for early damage detection in linear structures , 2009 .

[36]  Massimo Ruzzene,et al.  NATURAL FREQUENCIES AND DAMPINGS IDENTIFICATION USING WAVELET TRANSFORM: APPLICATION TO REAL DATA , 1997 .

[37]  Guoyu Meng,et al.  Vibration signal analysis using parameterized time–frequency method for features extraction of varying-speed rotary machinery , 2015 .

[38]  Spilios D. Fassois,et al.  MSSP special issue on the identification of time varying structures and systems , 2014 .

[39]  Wing Kong Chiu,et al.  Structural Health Monitoring in the Railway Industry: A Review , 2005 .